- Trusted Seller
Plastic Process Equipment MFT0754C
used
- Manufacturer: Plastic Process Equipment
Machine type: Process Equipment | Machine location: Utah | Stock #: 742211 | – power: 230V/3 Phase/ 60hZ/ 23.7 Amps
$2,990 USDChicago, IL - Trusted Seller
Plastic Process Equipment FX-100460
used
- Manufacturer: Plastic Process Equipment
Machine type: Process Equipment | Machine location: Utah | Stock #: 566483 | – air flow: 100 CMH | – dewpoint: -40C | – drying blower: 0.75kW | – drying heater: 6kW | – regen. blower: 0.18kW | – regen. heater: 4...
- Trusted Seller
2002 Advanced Process Equipment Car Bottom Oven
used
- Manufacturer: Advanced Process Equipment
Car- 22.5’L x 6’W Total- 27.9’L x 10’7″W 750° Machine type: Ovens | Machine location: Upon Request | Stock #: 029707
- Trusted Seller
2022 Taesungind TSI
used
- Manufacturer: Taesungind
High-capacity primary mixer (2,300L) with powerful 132kW planetary drive Large-scale DIW storage (5,000L) with integrated cleaning system Full CMC processing line with 2,300L mixing capacity Integrated slurry sto...
$3,520,000 USDChicago, IL - Trusted Seller
2022 Yunsung F&C
used
- Manufacturer: Yunsung
Premium 2,300L mixing line with 110kW planetary drive (1,500 RPM) Temperature-controlled process (34-60°C) PVDF mixer with 22kW dispersion Carbon/SP mixer with precision control NMP solvent system with 5,000L pri...
$6,344,000 USDChicago, IL - Trusted Seller
2007 Mokon Iceman
used
- Manufacturer: Mokon
230 Volt, 3 Phase Portable Chiller. 1 HP Compressor .75 HP Motor. Max Temp 70 Degrees F. R-22 Refrigerant.
$4,500 USDChicago, IL - Trusted Seller
Roto-Finish MP-120-6-5
used
- Manufacturer: Hammond/Roto-Finish
Machine type: Process Equipment | Machine location: Pennsylvania | Stock #: 090426 | -bowl diameter: 120″ | -channel width: 6″ | -revolutions per cycle: 5 | -processing time: 12-25 min | -motor: 20 HP | -weight:...
- Trusted Seller
2021 Matrix MX370P
used
- Manufacturer: Matrix
Speed 10 m/min (33 ft/min) Film Width 340 mm (13″) Sheet Width 420 mm (17″) Paper Weight ≥ 135 gsm Temperature 0–140 °C Control Multilingual LCD, semi-auto feed, auto separator Power 220–240 V, ~13 A, 2.2 kW Size...
- Trusted Seller
2020 Turfco Torrent 2
used
- Manufacturer: Turfco
Model Torrent 2 Debris Blower (#85651) Width Outside of tire to outside of tire – 48” (1.22 m) Height Nozzle pointed up – 40.5” (1.03 m), To top of engine – 36” (0.92 m) Length Hitch to end of chute – 108.8” (2.7...
- Trusted Seller
2014 Spider SC1500;SR;50Hz
used
- Manufacturer: Spider
14 x 12 x 24 in Machine type: Other Process | Machine location: Washington | Stock #: 438670 | Rated for: 1500 lbs. | Weight: 105 lbs
- Trusted Seller
2024 Ramco MK30EBSS
used
- Manufacturer: Ramco
Tank Size (Int.) 30″ × 22″ × 21″ Working (Basket) Zone 28″ × 17″ × 13″ Liquid Capacity 40 gallons Load Height 30.6″ Machine Footprint 33″ × 29″ × 57″ Agitation Speed 240 strokes/min (with dual-mode) Construction ...
- Trusted Seller
2021 Mahr 3 Component Metering Mix and Dispense
used
- Manufacturer: Mahr
3 COMPONENT MAHR METERING MIX AND DISPENSE SYSTEM. -DYNAMIC IN-LINE MIXER WITH COMPLETE AUTOMATIC SOLVENT FLUSH SYSTEM. -HEATED HOSES, FULLY AUTOMATED SYSTEM. -INJECTION PRESSURES OF 500 PSI OR HIGHER. -PRECISE T...
- Trusted Seller
2020 Schmidt & Heinzmann AutoCut SMC
used
- Manufacturer: Schmidt
Equipment Overview This Schmidt & Heinzmann AutoCut system is a full-scale SMC cutting solution built for automated material unwinding, ultrasonic contour cutting, weight verification, and line integration. Equip...
- Trusted Seller
2021 Drum Drying Resources 24'' x 24''
used
- Manufacturer: Drum Drying Resources
25.1 sq ft Total Drying Surface Area 24” diameter 24” roll length
- Trusted Seller
2016 American Truetzschler & ACelli Textile Machine Line
used
- Manufacturer: Trützschler
This is an entire Textile Production Line with Multiple Machines 24 Truck Loads of Equipment and Machinery At least 2 Trucks worth of Parts Equipped With: ACelli Slitter Rewinder ACelli Jumbo Winder Technoplant 4...
$2,290,000 USDChicago, IL 
Gardner Denver ES20 Industrial Compressor
used
- Manufacturer: Gardner Denver
- Model: ES20
Good condition Gardner Denver ES20 Industrial Compressors. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
