Used Processing in Ontario, Canada

900 Liter Tank with Mixer

-4 legs on wheels with brakes -flat bottom -stair access -SM-Cyclo mixer w/ reliance motor: .96 HP, 1750RPM -motor: 230/460 V, 1725 RPM -lid opens -304 stainless steel -Tank: 24" height x 54" diameter -198 Imp Ga...

741 Liter Stainless Steel Mixing/ Grinding Tank with Weg Motor

• Manufacturer: WEG

-Tank Dimensions: Height: 3' x Diameter: 3'4" -10.5" inlet on top -Has one 3" outlet on bottom -Six 1.5" closed ports on top -One 1" open port on top -All tri clamp connections -Pneumatic actuated lid -Has Allen ...

700 Litres Stainless-Steel Tank with 3" Outlet

-Tank dimesnions: Height: 66" x Diameter 29" -Total height: 79" -Outlet: 3" -Side pipe outlet: 4.5" -Access hatch on the side -Was used on vacuum system

6,819 Liter Jacketed Stainless steel horizontal tank

-Dimensions of tank: Height 60" x Length 118.5" x Width 59" -Six ports on one side: one: 1", three: 3", two: 1.5", -On the other side there are three ports: two: 3", one: 2" -Two inspection hatches with lids on t...

15,429 Liter Poly tank

-Plastic flat bottom -Manhole on top -On ss frame base (dimensions: 22” tall x 103” wide x 103” long) -Small port at bottom 3” diameter -Tank dimensions: 103” diameter x 113” tall -3,394 Imp Gallons -4,076 U.S. G...

6,694 Liter Dimple Jacketed Stainless Tank

-Capacity: 1474.46 Imperial gallons -1,769 U.S. Gallons -6,694 Liters -Inlet & outlet: 2" -Dimple jacketed -Coned bottom -Tri-clamp connections -Manhole on the side -Previously used at a brewery -Tank dimensions:...

900 Litres stainless steel tank on 55" legs with wheels

-Comes with lid that opens 1/3 of the way back -Valve in the middle of the lid is 2" -Tilted flat bottom -Port on bottom is 1.5" -Tank dimensions: 34" tall x 46" wide, on 55" tall legs -Shipping dimensions are 92...

FeldMeier Stainless Steel filter housing

• Manufacturer: Feldmeier

-Vessel MAWP 100 PSI AT 150 Degree F -MIN. Design Metal Temp -20 degree F at 100 PSI -Year Built 2000 -Serial No.5-202-00 -Shipping dimensions: Height - 59" x Width - 32" x Length - 20"

370 Litres stainless steel tank

-Dimensions: 28” diameter x 37” tall -Volume 98.6 US Gallon / 373 litre -Shipping dimensions: 43” length x 43” width x 62” height -Inlets/ outlets: 3” inlet on top, 2” inlet on top, 1” NPT inlet on top, 2” outlet...

377 Litres sanitizer tank

-3 legs stand 4’ off the ground -3” spout at the bottom with a 2” off spout off that -Removable lid -Shipping dimensions: 115” tall 27” diameter -Tank dimensions: 24” die x 51” tall -Two Sight glasses on the side...

2,150 Liter Mixing kettle

-On four stationary legs that are 26” tall -Cone bottom with dimples -Jacketed -lid on top, half opens -SPX Lignin mixer clamp on on top -SS -Shipping dimensions: 115” tall x 68” diameter -Tank dimensions: 48” ta...

Mac Conical Top Cyclone

• Manufacturer: MAC

-Shipping dimensions: length 54" x width 34" x 28" -Model CT17 -304 stainless steel -17" diameter x 12" straight side x 24" coned bottom -Approximate 200-525 cfm range

31 Litres little jacketed tank

-Shipping dimensions: Height 42" x Width 22" x Length 25" -Stainless steel -Open top -On for legs with wheels -Cone bottom with drain port -12” top opening -Tank dimensions: 13” x 14.5” -Drain port sits 3.5” down...

Labconco Air Filter

• Manufacturer: Labconco

-Shipping dimensions: Height 9 1/2" x Width 12 1/2" x Length 29" -Serial number: 66100 -116 Volts -PH 1 -Cycle: 50/60 -16 AMP

2,687 Litres jacketed stainless steel tank

• Manufacturer: Paul Mueller Company

-There is a mount for mixer -Manhole on top is -Dome bottom -Port on bottom is with manual valve -Drain port on bottom is 3" -Stationary legs are 21" tall -Max W.P. 30 & F.V. PSI at 300 degree F