Used Processing in Ontario, Canada

Drag conveyor

-Total shipping dimensions L- 69” W- 48” H- 55” -Inlet- 6.5” Outlet - 4” Access hatch -16.5”x 20” -Motor info HP- 7.5hp Volts - 575v RPM- 1750 PH- 3 Sew Eurodrive Ratio - 86.34:1

Small conveyor

-Small conveyor on incline - 30" high -55" wide - stationary

Roller Conveyor

Portable, 10 x 30"x18" Characteristics: Industrial Process + Tanks, Used | Price (cdn$): $400.00

Tonson air mixer

• Manufacturer: Tonson air motors

-Shaft is 5/8” diameter and roughly 36” long -Tons on air mixer -Shipping dimensions: 50” length x 17” width x 10” height -1.71 HP -Rotary vane power technology

Immersion Blender

-5 Foot shaft on mixer -90 inch overall height Pneumatic lift Explosion proof

2,410 Litres stainless steel tank

-On 4 stationary legs that are adjustable, rughly 42” tall -Cone bottom with dimples -Port on very bottom is 3”, two other drains on the bottom both 2” -Tri clamp ports at the bottom side are 2” -Cone top -Man ho...

Nettco Clip-on Agitator

-Comes with Genesis AC motor speed control hybrid drive -Shaft diameter: 1" -Model: NSPG-050 -SN: P72311A-1 -Motor: -HP: 0.33 -Volts: 230/460 -Amps: 1.6/ 0.8 -RPM: 1725 -Hz: 60 -Phase 3

Pneumatic Vibrator

• Manufacturer: Netter

-Shipping dimensions: 5" L x 3" W x 8" H -Netter PKL 135

Small Filter Cavity

• Manufacturer: GAF

-Manufacturer: GAF Filter Systems -SN: 1829 -Connections: 1 1/4" NPT -Max oper pressure: 300 psi -Max oper temp: 225 degrees F -Length of cavity: 16" -Diameter: 5"

454 Litres tank with mixer

• Manufacturer: Lightnin

-40" tall x 31" diameter -Jacketed stainless steel -Lightnin mixer on top -Max 50 PSI at 350 -3 legs 16" -Manhole top -3" nipple at the bottom

Fischer Porter Flowmeter

• Manufacturer: Fischer

-Manufacturer: Bailey Fischer Porter -Model: 10A3555S -SN: 443592 01 01 -CRN #: OF2766.5 -Max design pressure: 690 kPa. gauge -(100 psig) @ 38 degrees C (100 degrees F)

260 Litres stainless steel open top tank

-Dome bottom -Drain on bottom is 2” diameter -Four stationary legs 15” tall -Open top -Tank dimensions: 38” tall x 23.5” wide

Motor with Dual Blowers

HP: 1/2 Volt:575 Phase:3 RPM: 1165 Characteristics: Industrial Process + Tanks, Stainless Steel, Used | Price (cdn$): $400.00

Spencer Blower

• Manufacturer: Spencer

-Shipping dimensions: 50" L x 36" W x 42" H -Inlet/outlet: 4 3/4" -Volt: 230/460 -RPM: 3500 -HP: 15 -375S CFM -Type UT TE

Sifter table Lid

-Shipping dimensions: Height 7" x Width 48" x Length 48" -Top diameter: 14 3/4" -3 in stock