Used Materials Testing in Taiwan

GR-C030 4 point bend/flexure

• Manufacturer: cometech testing machines

Capacity: 20kN | Jaw face width: 24~160mm | Upper span: 24~300mm | Lower span: 58mm | Mini. load cell: 1kN | Temperature limits: 0~200℃ | Up weight: 7800g | Down weight: 11510g

GR-D05 Dual-way Vise Action Grip

• Manufacturer: cometech testing machines

Capacity: 2kN | Jaw face width: (W)mm | Specimen thickness: 0.2~40mm | Mini. load cell: 200N | Temperature limits: -10~200℃ | Weight: 1540g | Jaw face type: Serrated face

GR-D04 Single Adjustable Action Grip

• Manufacturer: cometech testing machines

Capacity: 5kN | Jaw face width: (W)mm | Specimen thickness: 0.2~4mm | Mini. load cell: 200N | Temperature limits: 0~200℃ | Weight: 1456g | Jaw face type: Rubber face

GR-B020 Wheel peel grips

• Manufacturer: cometech testing machines

Capacity: 200N | Wheel width: 25.4mm | Specimen thickness: 0.1~2mm | Temperature limits: -10~100℃ | Weight: 949g | Standard: ASTM D3330

GR-D01 Vice Action Grip - Wave Face

• Manufacturer: cometech testing machines

Capacity: 2kN | Jaw face width: (W)mm | Specimen thickness: 0.2~4mm | Mini. load cell: 200N | Temperature limits: -10~200℃ | Weight: 1600g | Jaw face type: Wave face

Digital Rockwell Hardness Tester Confirm to GB/T230.2, JJS Z2245, EN-ISO6508, ASTME-18 Standard

• Manufacturer: Wilson Rockwell

Applications: Hard alloy / Surface hardened steel / Copper alloy / Carburized steel / Hard cast steel / Malleable casting / Annealed steel / Hardened steel /Aluminum alloy / Soft steel / Bearing steel Features: ●...

QC-638 Vertical Rebound Resilience Tester Confirm to ASTM-D2632 Standard

• Manufacturer: cometech testing machines

This tester measures rubber elasticity based on free vertical drop hammer test method. The 28 gram of hammer is lifted to a height of 400mm for impact test. Average the 4th , 5th and 6th impact bound height value...

QC-657B H.D.T. Heat Deflection Tester Confirm to ASTM D648 ISO 75-1 Standard

• Manufacturer: cometech testing machines

The specimen is given a stress at the center, and the temperature should increase by 2 degrees Celsius per minute. When the specimen’s center area reach the deflection of 0.254mm, the temperature is determined as...

QC-116 Digital Bursting Strength Tester Confirm to ISO-2759, GB/T 6545, JIS-P8112, JIS-L1018, ASTM-D2210, TAPPI-T403 Standard

Digital Bursting Strength Tester is used for testing the bursting resistance for samples such as base paper, corrugating paper, leather, synthetic leather. This tester is a digital type that features automatic co...

QC-317F Digital Hydrostatic Head Tester Confirm to AATCC127, JIS- L1092, ISO811 Standard

• Manufacturer: cometech testing machines

Hydrostatic Head Tester (Hydro tester) is used for determining the water penetration resistance of high-waterproof clothingor coated fabrics by conducting the hydrostatic pressure test. It is an Open-Plan. The si...

Demattia Flex Crack Tester Confirm to ASTM-D813, JIS-K6301 Standard

• Manufacturer: cometech testing machines

QC-625 Rubber, leather, synthetic leather, sole of shoes, after a constant flexing bending motion, observe the cracking lever to judge and compare the endurance of material. Industry: Rubber, Leather, shoes sole

Electric Pencil Hardness Tester Confirm to ASTM D3363, ECCA T4, MILC27 227, NEW5350, SIS184187, SNV37113, JIS-C3003/D0202 Standard

GI-M023 according to WolffWilborn standard, this tester is designed to measure the coating surface hardness scrape-resistance, applied to experiment analysis or control production quality, suitable products inclu...

Manual Rockwell Hardness Tester Confirm to GB/T230.2, JJS Z2245, EN-ISO6508, ASTME-18 Standard

• Manufacturer: Wilson Rockwell

Applications: Hard alloy / Surface hardened steel / Copper alloy / Carburized steel / Hard cast steel / Malleable casting / Annealed steel / Hardened steel /Aluminum alloy / Soft steel / Bearing steel Features: ●...

Manual Roller , Motor Roller Confirm to JIS-C2107, Z0237, PSTC 7 Standard

• Manufacturer: cometech testing machines

QC-803A QC-803A is controlled by hand, hold roller and slightly go up, let fixed base leave the axle center, this moment the roller equals to standard weight, with 300mm/min speed back and forth roll through spec...

Perspiration Tester Confirm to AATCC-15, ISO 105, JIS 0848, GB T5713 Standard

• Manufacturer: cometech testing machines

QC-315 is used to determine the fastness of colored textiles soaked in water condition. Using textile and one piece (multi-fiber fabric) or two pieces (single fabric) stitched, after soaking in solution, be clamp...