- Trusted Seller
US INDUSTRIAL USR1025
- Manufacturer: US Industrial Machinery
- Model: USR1025
U.S. INDUSTRIAL USR1025 Initial Pinch Plate Roll has a 10 ft x 1/4" capacity. 5.5 HP Reduction Gear Drive main drive motor with 220/440V, 3 phase. Equipped with: Hardened Rolls, Cone Rolling Attachment, LED Reado...
Port Orange, FL - Trusted Seller
US INDUSTRIAL USHB22-4HM
- Manufacturer: US Industrial Machinery
U.S. INDUSTRIAL USHB22-4HM Hydraulic Press Brake 22 Ton working pressure and 4 ft Length of working table. Free Gooseneck Punch and multi-opening Die for up to 90° forming up to 10-gauge mild steel. FRONT OPERATE...
Port Orange, FL - Trusted Seller
EDWARDS ED9-HAT2010
- Manufacturer: Edwards
SPECIFICATIONS: GENERAL SPECIFICATIONS Rating 20 Tons Cylinder 2" Ram Stroke 6-1/4” EDWARDS PORTA POWER** Electric Motor Standard 5 HP 3~ 208V or 230V, 1725 RPM 14 A Electric Mot...
- Trusted Seller
EDWARDS ED9-HAT2000
- Manufacturer: Edwards
SPECIFICATIONS: GENERAL SPECIFICATIONS Rating 20 Tons Cylinder 2" Ram Stroke 6-1/4” EDWARDS PORTA POWER** Electric Motor Standard 5 HP 3~ 208V or 230V, 1725 RPM 14 A Electric Mot...
$4,799 USDPort Orange, FL - Trusted Seller
GATOR FAB GAL 1616
- Manufacturer: GATOR FAB
These features combine to deliver exceptional precision, efficiency, and durability for your fabrication needs. Rigid Punching Unit: Closed fuselage design for enhanced rigidity. Clean Cuts: Single-blade cutting ...
Port Orange, FL - Trusted Seller
SCOTCHMAN PRESSPRO 66
- Manufacturer: Scotchman
- Model: PRESSPRO 66
This motorized 66 ton workshop press has a movable cylinder (left-right) and an in-height adjustable working table.Equipped with pressure regulation, 2 speeds, joystick and a hand pump for precision pressing.This...
- Trusted Seller
SCOTCHMAN PRESSPRO 66
- Manufacturer: Scotchman
- Model: PRESSPRO 66
This motorized 66 ton workshop press has a movable cylinder (left-right) and an in-height adjustable working table.Equipped with pressure regulation, 2 speeds, joystick and a hand pump for precision pressing.This...
- Trusted Seller
SCOTCHMAN PRESSPRO 176
- Manufacturer: Scotchman
- Model: PRESSPRO 176
This 176 ton workshop press is equipped with a movable cylinder (left-right) and an in-height adjustable working table.The motorized hydraulic unit comes standard with a pressure regulator, 2 speeds, a joystick a...
- Trusted Seller
SCOTCHMAN PRESSPRO 176
- Manufacturer: Scotchman
- Model: PRESSPRO 176
This 176 ton workshop press is equipped with a movable cylinder (left-right) and an in-height adjustable working table.The motorized hydraulic unit comes standard with a pressure regulator, 2 speeds, a joystick a...
- Trusted Seller
SCOTCHMAN PressPro 110W
- Manufacturer: Scotchman
The Scotchman PressPro 110W The 110 ton wide frame hydraulic press is equipped with a movable cylinder (left to right) and an in-height adjustable working table. It has a pressure regulation, 2 speeds, a joystick...
- Trusted Seller
SCOTCHMAN PressPro 110W
- Manufacturer: Scotchman
The Scotchman PressPro 110W The 110 ton wide frame hydraulic press is equipped with a movable cylinder (left to right) and an in-height adjustable working table. It has a pressure regulation, 2 speeds, a joystick...
- Trusted Seller
NITTO KOHKI CB-01
- Manufacturer: Nitto
Air Pressure 85 PSI Air Consumption 5.3 CFM No Load Speed 28,000 RPM Chamfering Capacity (Mild Steel) Up to .039" (1mm) Chamfer Cham...
$595 USDPort Orange, FL - Trusted Seller
MANFORD SP-500VS
- Manufacturer: MANFORD
Table 10” x 54” (250 x 1370mm) T-Slot No.x Size 3” x 0.629” (3 x 16mm) Table Load 1,000 lbs. Longitudinal travel W/O power feed 34” ...
Port Orange, FL - Trusted Seller
KALAMAZOO INDUSTRIES S660MV
- Manufacturer: Kalamazoo
KALAMAZOO 6" x 60" Belt Sander with Vacuum Base S660MV - MADE IN USA!The Kalamazoo S660MV 6 x 60 inch sander delivers professional-grade results with a powerful dust collection system. Its ample belt tackles a va...
$4,695 USDPort Orange, FL - Trusted Seller
KALAMAZOO INDUSTRIES S660M
- Manufacturer: Kalamazoo
KALAMAZOO 6 x 60 in. Belt Sanders S660, S660M, S660MSThe S660M 6 x 60 inch belt sander with its powerful motor, adjustable belt speed, and durable construction, this sander tackles various materials with ease whi...
Port Orange, FL 
Kalamazoo DS20 Grinding machine
- Manufacturer: Kalamazoo
- Model: DS20
Good condition Kalamazoo DS20 Grinding machines. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword