2007 MORI SEIKI DURAVERTICAL 5100
- Manufacturer: Mori Seiki
- Model: DURAVERTICAL 5100
- Spindle taper: CAT 40
EQUIPPED WITH: Mori Seiki MSX-504 II CNC Control Spindle Chiller Quad Chip Augers Chip Conveyor Leveling Pads Machine is Wired for 220 volt / 3 phase / 60 H.Z. MSX-501 Chip Conveyor Programmable Coolant Spindle C...
2002 MORI SEIKI NH5000
- Manufacturer: Mori Seiki
- Model: NH-5000
- Spindle taper: CT 40
Pallet Surface to Spindle Center 2" – 25.6" Max Work Piece Swing 28.7" Max Work Piece Height 35.4" Table Center to Spindle Gauge Plane 3.9" – 30.3" Pallet Index Time 2 Sec Chip Conveyor Probe 360 Deg. Indexing Table
Sanford, FL
2001 MORI SEIKI SV500
- Manufacturer: Mori Seiki
- Model: SV-500
- Spindle taper: CT 40
X axis travel: 31.5" | Y axis travel: 20.1" | Z axis travel: 20.1" | Rapid rate x axis: 1,260 IPM | Rapid rate y axis: 1,260 IPM | Rapid rate z axis: 1,260 IPM | Spindle motor: 30 HP | Spindle speed: 10,000 RPM ...
2008 MORI SEIKI NH8000DCG
- Manufacturer: Mori Seiki
- Model: NH-8000 DCG
6 Pallet Pool X axis travel: 55.118" | Y axis travel: 47.24" | Z axis travel: 53.15" | Rapid rate z axis: 5,314 IPM | Spindle speed: 10,000 RPM
Sanford, FL
2007 MORI SEIKI MT4000
- Manufacturer: Mori Seiki
- Model: MT-4000
- Spindle bore: 274.32 mm
COMPLETELY REBUILT MILLING SPINDLE IN 2023 ($300,000 COST) MORI SEIKI MSX-502III CONTROL B-AXIS MILLING SPINDLE (6,000 RPM, CAPTO C8) Y-AXIS 50 HP TURNING SPINDLE 24", 4-JAW BISON MANUAL CHUCK 10.8" SPINDLE BORE ...
Sanford, FL
MORI SEIKI DMC 635 V ECOLINE CNC Vertical Machining Center 2013’ #6220
- Manufacturer: Mori Seiki
Imperial Metric X axis: 25" | Y axis: 20" | Z axis: 18.11" | # atc: 20 | Taper: CAT-40 | Table-w: 31.1" | Table-l: 22" | # axis: 3
MORI SEIKI DDRT-260 CNC Rotary Table 260mm #7722
- Manufacturer: Mori Seiki
- Model: DDRT-260
Imperial Metric MORI SEIKI DDRT-260 CNC Rotary Table 260mm #7722 Reference #7722 Model # DDRT-260 Serial # RT260KK1328F Table diameter- 260mm Center height- 160mm Center hold diameter- 75mm Maximum rotation speed...
MORI SEIKI MSC-518 FANUC Control Pendant SL-25 #7385
- Manufacturer: Mori Seiki
MORI SEIKI MSC-518 FANUC Control Pendant SL-25 #7385 Removed form a working Mori Seiki SL25 CNC Lathe new 1997'
$2,450 USDSarasota, FL- Trusted Seller
1997 Mori Seiki MH-63 12795
- Manufacturer: Mori Seiki
- Model: MH-63
24" Tsudakoma Rotary Index Table Coolant TO Spindle (Not Thru) Additional Tooling Included: 350+ Pieces
Maitland, FL - Trusted Seller
2007 Mori Seiki DuraVertical 5100 15626
- Manufacturer: Mori Seiki
- Model: DURAVERTICAL 5100
Rotary table / trunnion: None | Tool changer type: Side Mount | Control make/model: Mori Seiki MSX-504 CNC Control | Max table/pallet load: 2,000 | Max tool length: 11.800 | Max tool weight: 17.600 | Product typ...
Maitland, FL - Trusted Seller
2001 Mori Seiki SH-633 14775
- Manufacturer: Mori Seiki
- Model: SH-633
Vega 2002 Rapid Feed High Pressure Coolant Probe Capability
Maitland, FL - Trusted Seller
2011 Mori Seiki NV-7000/50 15696
- Manufacturer: Mori Seiki
- Model: NV-7000/50
Rotary Table: 15-inch Spindle Bore: 5-inch Work Holding Type: Scroll Chuck Tailstock: Hydraulic Vibration Damping: Rigid Slideway Construction
Maitland, FL - Trusted Seller
2013 Mori Seiki NH6300DCGII 15052
- Manufacturer: Mori Seiki
- Model: NH-6300 DCG II
Distance From Floor Surface To Pallet Surface: 49.2″ Max. Workpiece Swing Diameter: 41.3″ Max. Workpiece Height: 51.1″ Pallet Surface Configuration: 24 Holes, M16 Tap, Pitch 5″ Minimum Pallet Indexing Angle: 1° P...
Maitland, FL - Trusted Seller
2010 Mori Seiki NH4000DCG 12811
- Manufacturer: Mori Seiki
- Model: NH-4000 DCG
Hydraulic Clamping System Coolant type(s): Thru-Spindle Coolant, High Pressure Coolant | Auction url: { blankshield(document.getElementById('rtp_KL9ELn').parentElement);}); | Control make/model: Mori Seiki CNC...
Maitland, FL - Trusted Seller
2012 Mori Seiki NH-5000DCG 12779
- Manufacturer: Mori Seiki
- Model: NH-5000 DCG
- Spindle taper: BT 40
Blum Laser Tool Pick Up System Additional control options: MAPPS Operating System 2 Network Ports Supports Espirit CAD/CAM | Control options: RS-232, USB | Tool changer type: Carousel | Coolant type(s): Thru-Spin...
Maitland, FL 
Mori Seiki SV-500 Machining Center
- Manufacturer: Mori Seiki
- Model: SV-500
Good condition Mori Seiki SV-500 Machining Centers available between 1998 and 2000 years. Located in Serbia and other countries. Click request price for more information.
Serbia
Tip: Enter manufacturer, model or keyword