Used Machine Tools in Texas, USA

PLATE VULCANIZING PRESS, MFG. 2013, table approx. 31" x 31", post approx. 60" from base to top, cont

PLATE VULCANIZING PRESS, MFG. 2013, table approx. 31" x 31", post approx. 60" from base to top, control MNF. unknown, power unit: Dual 3 PH Shandong Hauli Motors, Mdl. HM2-160M-6, Plate Vulcanizing press, SFC SHU...

INDUCTION BEARING HEATER, EDDYTHERM 4X, TYPE ETH 17.440/3-60, S/N 43131376

INDUCTION BEARING HEATER, EDDYTHERM 4X, TYPE ETH 17.440/3-60, S/N 43131376

FRESH AIR BREATHING PUMP, ALLEGRO MDL. A300

FRESH AIR BREATHING PUMP, ALLEGRO MDL. A300

LOT CONSISTING OF: (2) Max Corp Mdl. A551A, pneumatic staple guns & (1) Max Corp Mdl. CN80, coil nai

LOT CONSISTING OF: (2) Max Corp Mdl. A551A, pneumatic staple guns & (1) Max Corp Mdl. CN80, coil nail gun

HYDRAULIC POWER UNIT, 30 HP, approx. 52"L x 27"W x 30"H tank

HYDRAULIC POWER UNIT, 30 HP, approx. 52"L x 27"W x 30"H tank

E3000 OilWell Drawworks

• Manufacturer: National Oilwell Varco, Inc

E3000 OilWell Drawworks – Specification List Engine & Power System • Drive System: Integrated heavy‑duty AC drive system engineered for continuous, high‑power output and fuel efficiency Torque & Pullback Capacity...

New Surplus AMC-AC 1600 Drawworks

Key Specifications Power & Drive System: • Rated at approximately 1600 HP, powered by an AC drive system engineered for high‑efficiency performance and reliable operation over long drilling cycles. Pullback Capac...

E2000 OilWell Drawworks

• Manufacturer: National Oilwell Varco, Inc

E2000 Drawworks – Specification List Rated Power: • Approximately 2000 HP • Driven by a heavy‑duty diesel engine integrated into a robust mechanical/AC drive system Pullback (Line Pull) Capacity: • Typically rat...

Rebuilt FH80 Iron Roughneck

Connection Compatibility: Handles tool joint connections ranging from 4¼ inches to 8½ inches in outside diameter. Drill Pipe Range: Accommodates nominal drill pipe sizes from 3½ inches up to 6⅝ inches without mod...

NOV TDS10 Top Drives

• Manufacturer: NOV

NOV TDS10 Top Drives Integrated Blowout Preventer (IBOP) Pressure Rating: 15,000 psi

NOV TDS9 Top Drive

• Manufacturer: NOV

Used NOV TDS9Top Drive Integrated Blowout Preventer (IBOP) Pressure Rating: 15,000 psi

PS2-500A National Top Drive

• Manufacturer: NOV

Integrated Blowout Preventer (IBOP) Pressure Rating: 15,000 psi

500 Ton AC Canrig Top Drive Kit

• Manufacturer: Canrig Drilling Tech.

T500 Top Drive: T500 HT Top Drive: Sigma Top Drive: Continuous Torque Rating: 75,000 ft-lb (101,686 Nm) @ 92 RPM; 31,500 ft-lb (42,700 Nm) @ 250 RPM

150 Ton Top Drive

• Manufacturer: Foremost

150 Ton Top Drive Rated capacity: 150 tons | Peak torque at stall: 25,860 ft-lbs | Maximum drill torque: 23,000 ft-lbs | Maximum speed: 200 RPM | Maximum circulating pressure: 5,000 PSI

Tesco Top Drive HMI-250

• Manufacturer: Tesco

Used Tesco Top Drive HMI-250 Operating Length (with 8 ft links and elevators): 173 inches (4,390 mm)

Landis FF Grinding machine

• Manufacturer: Landis
• Model: FF

Good condition Landis FF Grinding machines manufactured in 1978. Located in USA and other countries. Click request price for more information.