Used Combines in Germany

Trusted Seller
2015 Fendt Combine Harvester 8410 P
- Manufacturer: Fendt
- Model: 8410 P
- Horsepower: 398 hp
- Hours: 1,650 h
Combine Harvester 8410 P GPS equipment EGNOS hydraulic header drive hydraulic reversing system cutting height automation lowering automation electric setting for threshing drum electric fan adjustment electric ...
Holle, Germany
Claas combine #M0283
- Manufacturer: Claas
- Hours: 2,050 h
- Cutting width: 3.9 m
mech. drive, 5x shaker Operating hours: 2050 | Engine performance: 88 kW | Cutting tool width: 3,90 m | Set of tyres - back: 12.5 R 18 - 70 % | Set of tyres - front: 23.1 R 26 - 70 % | Shaker count: 5 | Comments:...
Bremen, Germany
1992 Case Combine Harvester #M0911
- Manufacturer: Case IH
- Hours: 2,932 h
- Cutting width: 6 m
Operating hours: 2932 | Engine performance: 173 kW | Cutting tool width: 6,00 m | Set of tyres - back: 380/70R24 | Set of tyres - front: 24.5-32 | Comments: Häcksler, Rotor, Klima
Bremen, Germany
John Deere combine #M0906
- Manufacturer: John Deere
- Hours: 3,160 h
- Cutting width: 4.85 m
Operating hours: 3160 | Engine performance: 155 kW | Cutting tool width: 4,85 m | Set of tyres - back: 30.5L32 | Set of tyres - front: 16.5/85-24 | Shaker count: 5 | Comments: Klima, Pendelausgleich, Verlustanze...
Bremen, Germany
2017 Case combine harvester #M0908
- Manufacturer: Case IH
- Hours: 1,800 h
Operating hours: 1800 | Engine performance: 366 kW | Set of tyres - back: 620/70R26 | Set of tyres - front: 800/70R38 | Comments: Klima, Luftsitz, Umkehrgetriebe, Rückfahrkamera, AdBlue, autom. Höhenanpassung, S...
Bremen, Germany
2003 John Deere combine #M0902
- Manufacturer: John Deere
- Hours: 2,500 h
- Cutting width: 6 m
hydraulic drive, air conditioning, reversing device, horizontal reel adjustment, throughput control, on-board computer
Bremen, Germany
2009 New Holland combine #M0895
- Manufacturer: New Holland
- Hours: 2,286 h
- Cutting width: 10.6 m
Chopper, air conditioning, rotor, hydraulic drive, loss measurement, electric sieves, horizontal reel adjustment, on-board computer / performance monitor, air seat, hitch, cutterbar carriage, engine manufacturer
Bremen, Germany
1993 Laverda / Fiatagri combine #M0804
- Manufacturer: Laverda
- Hours: 4,976 h
- Cutting width: 6 m
climate, stone catcher, hydr. drive, autom. height adjustment, reel horizontal adjustment
Bremen, Germany
2006 John Deere combine #M0801
- Manufacturer: John Deere
- Hours: 2,377 h
- Cutting width: 6 m
Yield and moisture measurement, monitor, stone catcher, grain tank extension, height adjustment, John Deere 620 cutterbar + wagon, available at extra cost
Bremen, Germany
1984 New Holland combine #M647
- Manufacturer: New Holland
- Hours: 4,937 h
- Cutting width: 6 m
shredder, rotor, hydr. drive Operating hours: 4937 | Engine performance: 186 kW | Cutting tool width: 6,00 m | Set of tyres - back: 480/70R24 | Set of tyres - front: 18.4-30 | Comments: Häcksler, Rotor, hydr. Ant...
Bremen, Germany
2002 Massey Ferguson combine #M0698
- Manufacturer: Massey Ferguson
- Hours: 2,005 h
- Cutting width: 5.5 m
Air conditioning, chaff spreader, fine chopper, reversing device, long auger, Datavision, all-wheel drive, with wagon without power flow
Bremen, Germany
1999 Massey Ferguson combine #M0691
- Manufacturer: Massey Ferguson
- Hours: 2,100 h
Power Flow cutterbar, chopper, loss indicator, on-board computer, reversing device, air-conditioning, hydr. drive
Bremen, Germany
1994 John Deere combine #M0650
- Manufacturer: John Deere
- Hours: 2,368 h
- Cutting width: 6 m
Air conditioning, radio, loss indicator, chopper, hydraulic drive, reversing device
Bremen, Germany
1996 Claas combine #M0775
- Manufacturer: Claas
- Hours: 3,512 h
- Cutting width: 5.1 m
Operating hours: 3512 | Engine performance: 125 kW | Cutting tool width: 5,10 m | Set of tyres - back: 650/75R34 | Set of tyres - front: 500/60-22.5 | Shaker count: 5 | Comments: Häcksler, 3-D, Reversiereinricht...
Bremen, Germany
John Deere combine #M0680
- Manufacturer: John Deere
- Hours: 575 h
- Cutting width: 6.8 m
Fine chopper, air conditioning, on-board computer, 6x straw walkers, yield measurement,
Bremen, Germany
Case IH Axial-Flow 7150 Combine
- Manufacturer: Case IH
- Model: Axial-Flow 7150
Good condition Case IH Axial-Flow 7150 Combines available between 2019 and 2023 years. Located in USA and other countries. Click request price for more information.
USA