Used Claas Combines in Germany

Claas combine #M0283
- Manufacturer: Claas
- Hours: 2,050 h
- Cutting width: 3.9 m
mech. drive, 5x shaker Operating hours: 2050 | Engine performance: 88 kW | Cutting tool width: 3,90 m | Set of tyres - back: 12.5 R 18 - 70 % | Set of tyres - front: 23.1 R 26 - 70 % | Shaker count: 5 | Comments:...
Bremen, Germany
2006 Claas combine #M0751
- Manufacturer: Claas
- Cutting width: 7.5 m
All-wheel drive, chopper, loss measurement, yield measurement, pendulum compensation, chaff spreader, throughput control, reel horizontal adjustment, reversing device, on-board computer
Bremen, Germany
1996 Claas combine #M0775
- Manufacturer: Claas
- Hours: 3,512 h
- Cutting width: 5.1 m
Operating hours: 3512 | Engine performance: 125 kW | Cutting tool width: 5,10 m | Set of tyres - back: 650/75R34 | Set of tyres - front: 500/60-22.5 | Shaker count: 5 | Comments: Häcksler, 3-D, Reversiereinricht...
Bremen, Germany
2003 Claas combine #M0663
- Manufacturer: Claas
- Cutting width: 6 m
Auto Contour, on-board computer, throughput control, yield measurement, pendulum compensation, reversing device, automatic cutterbar guidance, loss measurement, chaff spreader, chopper, air conditioning, cutterba...
Bremen, Germany
Air conditioning compressor for Claas combine harvesters
- Manufacturer: Claas
Bremen, Germany
Trusted Seller
2008 CLAAS Lexion 580 Terra Trac
- Manufacturer: Claas
- Model: LEXION 580
- Horsepower: 424 hp
- Hours: 3,480 h
Lexion 580 Terra Trac - 2 rotors - Yield mapping - Moisture meter - Automatic hitch - Autocontour Header: Claas V900 | S/N: Z1608194 Header trailer: Claas Transport trailer | S/N: 71926663
$135,409 USD
Get financing
Est. $2,548/mo
Husum, Germany
Trusted Seller
1984 CLAAS Dominator 76
- Manufacturer: Claas
- Model: DOMINATOR 76
- Horsepower: 120 hp
- Hours: 3,516 h
Dominator 76 . . Power: 128 HP (94 KW) | Operating hours: 3516 hours | Category: Combine harvester
$17,662 USD
Get financing
Est. $347/mo
Wittingen, Germany
Trusted Seller
2011 CLAAS Tucano 320
- Manufacturer: Claas
- Model: TUCANO 320
- Horsepower: 241 hp
- Grain tank size: 6,500 L
Category: Combine harvester | Drumming lessons: 1039 std
$140,119 USD
Get financing
Est. $2,637/mo
Gudensberg, Germany
Trusted Seller
2022 CLAAS Lexion 7700 TT
- Manufacturer: Claas
- Model: LEXION
- Horsepower: 790 hp
- Hours: 880 h
Lexion 7700 TT Claas Vario 1080 cutting system, Cruise Pilot, Jet Stream cleaning system + 3D grain tank discharge pipe XXL, 420 mm radial distributor, Special Cut, MAN D2676 engine - 404 kW/549 hp, 1,150 liter f...
$394,452 USD
Get financing
Est. $7,424/mo
Holle, Germany
Trusted Seller
1999 CLAAS Lexion 480 Terra Trac
- Manufacturer: Claas
- Model: LEXION 480
- Threshing system type: Hybrid
Lexion 480 Terra Trac Claas Lexion 480 Terra Trac in good condition Contact Christian ErdmannClaas Lexion 480 Terra Trac
$84,778 USD
Get financing
Est. $1,596/mo
Wehretal, Germany
Trusted Seller
2020 CLAAS Convio 13.80 m
- Manufacturer: Claas
Category: Combine harvester
$64,760 USD
Get financing
Est. $1,219/mo
Wendorf, Germany
2022 Claas Lexion 5300 20843-448160610364
- Manufacturer: Claas
- Model: LEXION
- Horsepower: 790 hp
- Cutting width: 13.8 m
Description Working width:: 7.7 m Rotor running hours:: 420 m/h Axles Second axle:: 800/70 R32 Rear axle:: 500/85 R24 Condition Condition:: used
$320,872 USD
Get financing
Est. $6,039/mo
Germany
2004 Claas Lexion 560 20843-448897310249
- Manufacturer: Claas
- Model: LEXION 560
- Horsepower: 290 hp
- Grain tank size: 9,866.94 L
Description Working width:: 7.5 m Rotor running hours:: 2,588 m/h Axles Second axle:: 900/60 R32 Rear axle:: 600/55 R26,5 Condition Condition:: used
$139,418 USD
Get financing
Est. $2,624/mo
Germany
2022 Claas 7700 TT 20843-420205310364
- Manufacturer: Claas
- Axle configuration: 4x2
Description Working width:: 10.8 m Rotor running hours:: 530 m/h Axles Axle configuration:: 4x2 Second axle:: K Rear axle:: 620/70 R30 Condition Condition:: used
$467,856 USD
Get financing
Est. $8,805/mo
Germany
2002 Claas Lexion 460 20843-452448510252
- Manufacturer: Claas
- Model: LEXION 460
- Horsepower: 295 hp
- Cutting width: 4.5 m
Description Rotor running hours:: 3,313 m/h Condition Condition:: used
Germany
Claas LEXION Combine
- Manufacturer: Claas
- Model: LEXION
Good condition Claas LEXION Combines available between 1997 and 2018 years. Located in USA and other countries. Click request price for more information.
USA