Used Threading & Tapping

Trusted Seller
VIDEX
- Manufacturer: Videx
Equipped With * Fully Automatic Specialty Bolt Machines >> Single / Double End? U-Bolts, Eye Bolts, Anchor Bolts, Threaded Studs, Chamfered Parts and more * High Speed Planetary Thread Rollers * High Speed Nail R...
Vaughan, Canada
Trusted Seller
REED A23
- Manufacturer: Reed
- Model: A23
Equipped With Min. - Max. Threading Diameter (In-feed): 1/4" - 3-3/4" Min. - Max. Thread Diameter (Thru-feed): 1/4" - 1" Maximum Thread Length (In-feed): 2-3/8" Maximum Thread Length (Thru-feed): 11"
Vaughan, Canada
Trusted Seller
MACHINES & TECHNOLOGIES BBW
- Manufacturer: MACHINES & TECHNOLOGIES
Equipped With THREAD ROLLING MACHINE TYPE BBW ? The upper die ? which is the longer one of the two dies ? is mounted on a movable slide. ? The lower, fi xed die is clamped into the height-adjustable die pocket by...
Vaughan, Canada
Trusted Seller
2013 GOVAMA 3R-9
- Manufacturer: GOVAMA
Equipped With **Safety Features *All pinch points guarded with covers *All covers have coded magnet safety interlock switches *2 handed control for jog or automation process *System must be reset after e-stop act...
Vaughan, Canada
Trusted Seller
2013 TESKER 230
- Manufacturer: TESKER
Equipped With Max. Threading Diameter Up To 2-1/2" * Spindle Speeds VARIABLE * Complete with Hydraulic Pump and Tank
Vaughan, Canada
Trusted Seller
2024 GOVAMA HK-18
- Manufacturer: GOVAMA
Equipped With Like new, never used in production ? Three sets of 9 pitch dies (6") ? Three sets of 14 pitch ? 1 set of 16 pitch ? All end feed dies ? End Feed Max. Threading Diameter Up To 2-1/2" Location:
Vaughan, Canada
Trusted Seller
WATERBURY #100
- Manufacturer: Waterbury Farrel
Equipped With * Rebuilt Max. Thread Dia. x Length (Hot rolled): 2"x4-1/2" Max. Thread Dia. x Length (Cold rolled): 1-1/2"x4-1/2" OR Max. Thread Dia. x Length (Cold rolled): 1"x8"
Vaughan, Canada
Trusted Seller
1997 VIDEX VA-10
- Manufacturer: Videx
Equipped With Max. thread diameter: 3/8" (M10) | Min. thread diameter: 1/8" (M2.5) | Max thread length: 2-3/8" (60mm) | Maximum blank length: 4" (100mm) | Maximum production: up to 800 PPM | Thread rolling die si...
Vaughan, Canada
Trusted Seller
1966 REED A25
- Manufacturer: Reed
Equipped With Maximum thread diameter: 3 inches | Thread dia thru feed, max: 2.5 inches | Spindle diameter: 2.125 inches | Thread length thru feed: 20 feet | Weight (approx): 6500 pounds | Floor space approx: 40"...
Vaughan, Canada
Trusted Seller
PRUTTON 75 CNVB
- Manufacturer: Prutton
- Model: 75CNVB
Equipped With * 24' Vibratory Bowl * Bulk Feeder Thread diameter: .050" - .250" | Max. thread length: 2-7/8" | Shank length: 4" | Dies: 90deg seg | Speed: 1500 ppm | Electrics: 480volts/3ph/60cyl | Weight: 3000 L...
Vaughan, Canada
Trusted Seller
MAX-TEK 2
- Manufacturer: MAX-TEK
Equipped With * Vibratory Bowl Thread diameter: .050" - .200" (Ring shank) | Max. thread length: 3" | Speed: 1500 ppm | Motor: 15hp | Electrics: 480volts/3ph/60cyl | Dimensions: 4'W x 5.5' L approx. | Weight: 300...
Vaughan, Canada
Trusted Seller
PRUTTON 150 AH
- Manufacturer: Prutton
Equipped With Wire diameter range: 3/16" - 3/8" | Max. thread length: 3" | Magazine feed: 30" | Max production rate: 350 ppm | Machine weight: 3,500 lbs.
Vaughan, Canada
Trusted Seller
REED A22HB
- Manufacturer: Reed
Maximum thread diameter: 3.750 inches | Minimum thread diameter: .156 inches | Thread dia thru feed, max: 1 inches | Thread length thru feed, min: .250 inches | Thread length infeed: 2.375 inches | Thread length...
Vaughan, Canada
Trusted Seller
REED 75
- Manufacturer: Reed
Equipped With * 24' Vibratory Bowl * Bulk Feeder Thread diameter: .050" - .200" (Ring shank) | Max. thread length: 3" | Dies: 7" Rotary (90deg seg) | Speed: 2000 ppm | Motor: 15hp | Electrics: 480volts/3ph/60cyl ...
Vaughan, Canada
Trusted Seller
2021 GOVAMA HK-25
- Manufacturer: GOVAMA
Equipped With Special price * Hopper Feeder * Loader * Vib Feeder Bowl * Conveyor Location:
Vaughan, Canada
National 2-3 Threading & Tapping
- Manufacturer: National
- Model: 2-3
Good condition National 2-3 Threading & Tappings manufactured in 1979. Located in Canada and other countries. Click request price for more information.
Canada