Used Threading & Tapping

1-7/8"-8 x 14" Carbon Steel Fully Threaded Stud & 2 Grade 2H Hex Bolts-Lot of 10 Threaded Rods & Threaded Studs

• Manufacturer: Highland

Thread Size : 1-7/8"-8 Thread Class : 2A Min. Tensile Strength : 115,000 psi Material : Carbon Steel Threaded Rod Material Grade : Grade B7 Threaded Rod Finish : Black Oxide Dia./Thread Size : 1-7/8"-8 Rockwell H...

REED A22HB

• Manufacturer: Reed

Maximum thread diameter: 3.750 inches | Minimum thread diameter: .156 inches | Thread dia thru feed, max: 1 inches | Thread length thru feed, min: .250 inches | Thread length infeed: 2.375 inches | Thread length...

REED 75

• Manufacturer: Reed

Equipped With * 24' Vibratory Bowl * Bulk Feeder Thread diameter: .050" - .200" (Ring shank) | Max. thread length: 3" | Dies: 7" Rotary (90deg seg) | Speed: 2000 ppm | Motor: 15hp | Electrics: 480volts/3ph/60cyl ...

2021 GOVAMA HK-25

• Manufacturer: GOVAMA

Equipped With Special price * Hopper Feeder * Loader * Vib Feeder Bowl * Conveyor Location:

1998 REED 150T-VB

• Manufacturer: Reed

Equipped With * Vib Feeder Bowl Wire diameter range: 1/8" - 1/2" (3.2 - 13mm) | Max. thread length: 3" (76mm) | Max production rate: up to 1200 ppm | Die info: 9" dia ring die x 120deg seg | Machine weight: 3,000...

MACHINES & TECHNOLOGIES ? Fastener Assembly machines

• Manufacturer: MACHINES & TECHNOLOGIES

Equipped With ?High Speed Cable Clip & Nail Assembly Machine (ZYJN) ?Stainless Steel Cap & Self - Drilling / Tapping Screw Assembly Machine (ZYK) ?Stainless Steel Cap & Long Self - Drilling / Tapping Screw Assemb...

HARTFORD 000-1000

• Manufacturer: Hartford
• Model: 000-1000

Equipped With * Rotovane Hopper Location: Screw diameter range: 0.45" - 1/8" (.045"-.125") | Maximum thread length: 9/16" | Maximum shank length: 1" | Speed: 330-1000 ppm | Motor: 1.5 hp | Weight approx.: 1500 lbs

SASPI GV3-20

• Manufacturer: SASPI
• Model: GV3-20

Equipped With * 28" Vibratory Feeder Bowl * Adjustable Pitman * Coolant Tank

WATERBURY #30

• Manufacturer: Waterbury Farrel
• Model: 30

Equipped With * Coolant pump * Auto lube Maximum diameter: 1/2" | Maximum thread length: 4" | Maximum depth of dies: 4-1/8" | Shank length: 8" | Speed: 60 ppm | Motor: 15 hp | Electrics: 460/3/60 | Weight (approx...

HARTFORD 40-140

• Manufacturer: Hartford
• Model: 40-140

Equipped With Low Hours, 1380 * AIM P270 power dereeler * Feed rolls/tooling for .108 .125 .157 .188 .250 .313 * Ring tools for .250 and .313 * Stand alone ring butt welder Max Wire Tensile at Max Wire Dia: 550N/...

Ruja Falcon #50

• Manufacturer: Ruja

Equipped With Wire diameter range: 0.8mm - 1.8mm | Nail length range: 6.5mm - 40mm | Output: 800 PPM | Motor: 1.5kW | Weight, approx: 830 kgs | Dimensions: 140x90x140cm

GPM SERIES

Model GPM-25C Planetary Die Double End Thread Rolling Machine The GPM series models offer single or double ended thread rolling, from diameters of 6-33mm (1/4"-1-1/4") either via the standard magazine feeder, or ...

GPM SERIES

Model GPM-16C Planetary Die Double End Thread Rolling Machine The GPM series models offer single or double ended thread rolling, from diameters of 6-33mm (1/4"-1-1/4") either via the standard magazine feeder, or ...

ROT Series

Model ROT-1 Two Die Two Station 25tons PLC Controlled Cylindrical Thread Rolling Machine > The ROT-1 machine has been designed & produced to meet ball stud producers with high volume demand > There are total of 2...

HK SERIES

Model HK-18 (18Ton) 2Die Cylindrical Thread Rolling Machine > The HK series of hydraulic rolling machines are equipped with two rolling spindles, with one moving head. > All machines equipped with AC Variable Spe...