- Trusted Seller
CNC lathe
used
CNC lathe in very good condition. Ideal for high precision turning work. * Type: CNC lathe (Numerical Control by Computer) * Condition: Very well maintained, in working order Ideal for mechanical workshops, indu...
Sens-de-Bretagne, France - Trusted Seller
MAS MT50 CNC
used
- Manufacturer: MAS - Kovosvit
Turret multifix C Tool section max/ 32 x 32 Type of cn: HEIDENHAIN | Admissible diameter above the bench (mm): 500 | Passage diameter above the carriage (mm): 350 | Length between centers: 1500 | Stroke x (mm): 2...
Toulouse, France - Trusted Seller
2018 ROMI C 420 CNC
used
- Manufacturer: Romi
- Model: C420
TRAINING LATHE ROMI TYPE C 420 CNC, Year 2018 8-station automatic turret Manual tailstock CM4 - Diam:60 mm
Toulouse, France 
2005 DOOSAN QL300H twin CNC facing lathe - twin CNC center lathe
used
- Manufacturer: Doosan
- Model: PUMA QL300H
DOOSAN QL300H Twin CNC facing lathe - twin CNC center lathe One lathe with chuck and one lathe with cylinder clamping CNC Fanuc 18i-TB Distance between spindle centers 500 mm Max turning diameter 310 mm (to ...
France- Trusted Seller
Pont-Saint-Pierre, France - Trusted Seller
SOMAB UNIMAB 500
used
- Manufacturer: Somab
- Model: UNIMAB 500
CNC PL+S3 / Tourelle MULTIFIX C Distance between-centers (mm): 1500
Pont-Saint-Pierre, France - Trusted Seller
2007 CAZENEUVE OPTIMAX 360
used
- Manufacturer: Amutio - Cazeneuve
- Model: Optimax 360
CNC OPTIMAX V3 / Tourelle MULTIFIX Ø over the bed (mm): 430 | Spindle bore (mm): 54 | Distance between-centers (mm): 700 | Ø over cross-slides (mm): 178 | Bed width (mm): 330 | Spindle speeds (rpm): 3000 | Main m...
Pont-Saint-Pierre, France - Trusted Seller
2003 PINOCHO Mustang 200
used
- Manufacturer: Mustang
- Model: 200
Turnable length 1000.0 mm Turning diameter 450.0 mm Dia. on bench 450.0 mm turning diameter 450 mm turning length 1000 mm Center height 225 mm spindle speed range 0 BIS..3000 IN 2 STUFEN U / min control FAGOR TC ...
Sens-de-Bretagne, France - Trusted Seller
BIGLIA B 658/YS NUMERICAL CONTROL LATHE YEAR 2012
used
- Manufacturer: Biglia
- Model: B 658 YS
Bin 250l watering tank Chip conveyor conveyor Predisposition bar feeder Parts recuperator Collet chuck spindle 1 and 2 3-jaw chuck: 2 autoblock 165 bh Bar feeder LNS bar feeder type quickload s80-short bar. Tool ...
Toulouse, France - Trusted Seller
BIGLIA B 565/YS NUMERICAL CONTROL LATHE YEAR 2007
used
- Manufacturer: Biglia
- Model: B 565 YS
WATERING TANK 250L CHIP CONVEYOR TOOL PALPERS PARTS COLLECTOR BAR FEEDER PREDISPOSITION COLLET CHUCK SPINDLE 1 & 2 CHUCK 3 JAWS AUTOBLOCK DIAM 210MM BAR FEEDER LNS TYPE QUICKLOAD S80 SHORT BAR ROTATING TOOL HOLDE...
Toulouse, France - Trusted Seller
CNC LATHE NAKAMURA WT100
used
- Manufacturer: Nakamura
USED CNC LATHE NAKAMURA WT 100 MAIN SPINDLE SUB SPINDLE UPPER TURRET Axis strokes : X: 135 mm Y: +/-31mm - Z: 503mm LOWER TURRET Axis strokes: X: 135mm - Z: 503mm Equipped with: 1 FANUC CNC 1 Set of fixed and rot...
La Roche-sur-Foron, France - Trusted Seller
CNC LATHE NAKAMURA SC300L
used
- Manufacturer: Nakamura
USED CNC LATHE NAKAMURA SC300L MAIN SPINDLE SUB SPINDLE TURRET Equipped with : 1 CN FANUC 18i-TB 1 HAINBUCH 2701/0011 collet clamp on the main spindle 1 HFKN 165/46 chuck clamp on the sub spindle 1 Set of fixed a...
La Roche-sur-Foron, France - Trusted Seller
CNC LATHE NAKAMURA WT 150 II
used
- Manufacturer: Nakamura
USED CNC LATHE NAKAMURA WT 150 II MAIN SPINDLE SUB SPINDLE UPPER TURRET Axis travel: X: 167.5mm Y: +/-35mm - Z: 515mm LOWER TURRET Axis travel: X: 167.5mm - Z: 515mm Equipped with: 1 FANUC CNC 1 CNC parts collect...
La Roche-sur-Foron, France - Trusted Seller
MULTISPINDLE LATHE TORNOS AS14
used
- Manufacturer: Tornos
- Model: AS14
USED MULTISPINDLE LATHE TORNOS AS14 This MULTISPINDLE LATHE TORNOS AS14 is equipped with : 1 Pick up + brake 2 Independents 1 Set of toolholders 1 Set of drills 1 Drum + support
La Roche-sur-Foron, France - Trusted Seller
MULTISPINDLE LATHE TORNOS AS14
used
- Manufacturer: Tornos
- Model: AS14
USED MULTISPINDLE LATHE TORNOS AS14 This MULTISPINDLE LATHE TORNOS AS14 is equipped with : 1 Pick up + brake 2 Independents 1 Set of toolholders 1 Set of drills 1 Tapper 1 Drum + support
La Roche-sur-Foron, France 
Tornos Deco 13 CNC Lathe
used
- Manufacturer: Tornos
- Model: Deco 13
Good condition Tornos Deco 13 CNC Lathes available between 2000 and 2002 years. Located in United Kingdom and other countries. Click request price for more information.
United Kingdom
Tip: Enter manufacturer, model or keyword
