Used variable speed in Nuevo León, Mexico

W 1832S

Double angle cut, left 60° / right 45°. Hydraulic blade tension. Manually rotating saw frame. Automatic height adjustment via touch device. Variable blade speed via motor inverter. Digital blade speed readout. Ma...

MSC-773 VERTICAL BAND SAW, 36" THROAT, DOALL BRAND

• Manufacturer: DoAll
• Model: MSC-773

DOALL (USA) Vertical band saw model V-36, 36" throat, max height 9", table 30" x 30", variable speed, 1.5 HP motor, s/n. 36463836

MSC-791 VERTICAL BAND SAW WITH DEGREE INCLINATION, 18" THROAT, MAX. HEIGHT 20", MARVEL BRAND

• Manufacturer: Marvel
• Model: MSC791

Marvel (U.S.A.) Model 81 Vertical Band Saw with Degree Tilt, 18" Throat, 20" Max Height, Automatic Feeds, Degree Tilt, Variable Speed, 7.5 HP Motor, s/n 2040

W 1824

Manually rotating saw head. Miter cut 0-60° (R). Blade tension gauge. Hydraulic auger. Auger pressure regulator. Variable blade speed via variator. Digital blade speed display. Arc height adjuster on the control ...

TRV-003 VERTICAL LATHE MODEL 48-VBM, 56" TURN CAPACITY, WITH 48" PLATE, SUMMIT BRAND

• Manufacturer: Summit
• Model: VBM

SUMMIT (Yugoslavia) Vertical lathe model 48-VBM, 56" turning capacity, with 48" chuck, Max. height under hmta: 1200mm, Variable Speed (0 - 250 RPM), motor 75 HP, s/n. 635

W 1832SR

Double angle cut: left 60° / right 45°. Hydraulic blade tension. Blade height adjusted by touch device. Variable blade speed via motor inverter. Two-stroke hydraulic press. Manual screw movement. Press pressure r...

RML 1440VT

Motor power: 5 HP using a variable frequency inverter. DIGITAL DISPLAY: 20-400-2500 Infinitely variable speed range. Hardened and ground gears and bed. Solid bed frame along the entire length of the casting. Fron...

KTM 3VK

3 HP motor, variable speed 60, 500, 4200 RPM at the headstock. 10" x 50" hardened and ground table. T-slots. Precision hardened and ground spindles with double nuts for wear compensation. Meehanite casting with b...

W 2127SD

Saw height adjustment from the control panel. Double angle cutting left / right. Hydraulic blade tensioning device. Variable blade speed by motor inverter. Motor to clean the chips from the band saw. Manual screw...

W 1318SA

Touchscreen and length encoder. Left angle cut 0° / right angle cut 45°. Blade tension gauge. Screw pressure regulator. Vertical clamps for bundle cutting. Variable blade speed via inverter. Chip conveyor. Manual...

W 1320SD

Touchscreen and length encoder. Left angle cut 0° / right angle cut 45°. Blade tension gauge. Screw pressure regulator. Vertical clamps for bundle cutting. Variable blade speed via inverter. Chip conveyor. Manual...

JHU 2706H/NC

Hardened nitride, super-finished power. The variable-speed workhead rotates 90° CCW and 30° CW. The wheelhead's rapid advance and retraction allows for faster setup and verification of grinding dimensions. Hydrau...

TRL 1340 / 1340V

Heaviest 13" lathe in its class. 5 HP motor. 16-speed geared headstock. Infinitely variable speed range in Hi/Low speed range. Push-button for easy speed control. Hardened and ground gears and beds. Solid cast be...

W 1824SA

Touchscreen and length encoder. Miter cut 0 to 45° (R). Hydraulic blade tension. Screw pressure regulator. Vertical presses for cutting bundles. Variable blade speed via inverter. Band saw chip clearing motor. Ch...

W 1824SD

Touchscreen and length encoder. Miter cut 0 to 45° (R). Hydraulic blade tension. Screw pressure regulator. Vertical presses for cutting bundles. Variable blade speed via inverter. Band saw chip clearing motor. Ch...