Used parallel in Lugano, Switzerland

Millutensil AM 04 (1400x1070 mm)

• Manufacturer: Millutensil

The first model for small and medium dies. The AM 04 is the first model with an hydraulic system controlled by electronic servo proportional valves and a control of parallelism. The control system includes measur...

Millutensil AM 06 (2000x1270 mm)

• Manufacturer: Millutensil

The second model for small and medium size dies. The AM 06 is the first model with an hydraulic system controlled by electronic servo proportional valves and a control of parallelism. The control system includes ...

Millutensil AM 08 (2600x1470 mm)

• Manufacturer: Millutensil

The third model for medium size dies. The AM 08 is the first model with an hydraulic system controlled by electronic servo proportional valves and a control of parallelism. The control system includes measurement...

TWINTEX LCR-7100A

• Manufacturer: TWINTEX

RLC measuring bridge from 12 Hz to 100 kHz, accuracy 0.05% . Test parameter: |Z|, |Y|, C, L, X, B, R, G, D, Q, θ, DCR Test signal frequency: from 12 Hz to 100 kHz continuously adjustable with min. step 0.1 mHz Ba...

TWINTEX LCR-7300A

• Manufacturer: TWINTEX

RLC measuring bridge from 12 Hz to 300 kHz, accuracy 0.05% . Test parameter: |Z|, |Y|, C, L, X, B, R, G, D, Q, θ, DCR Test signal frequency: from 12 Hz to 300 kHz continuously adjustable with min. step 0.1 mHz Ba...

TWINTEX LCR-7200A

• Manufacturer: TWINTEX

RLC measuring bridge from 12 Hz to 200 kHz, accuracy 0.05% . Test parameter: |Z|, |Y|, C, L, X, B, R, G, D, Q, θ, DCR Test signal frequency: from 12 Hz to 200 kHz continuously adjustable with min. step 0.1 mHz Ba...

TWINTEX LCR-7500A

• Manufacturer: TWINTEX

RLC measuring bridge from 12 Hz to 500 kHz, accuracy 0.05% . Test parameter: |Z|, |Y|, C, L, X, B, R, G, D, Q, θ, DCR Test signal frequency: from 12 Hz to 500 kHz continuously adjustable with min. step 0.1 mHz Ba...

KEMO VBF/3

• Manufacturer: Kemo

Dual variable filter, low pass and high pass, usable in series/parallel/discrete configuration. From 100 mHz to 10 kHz with 24 dB/octave.

ALTENDORF F 45 - Norme CE

• Manufacturer: Altendorf
• Model: F45

Technical data: Hydrualic blade lifting and tilting with foot pedal operation Control elements on both sides of the carriage Worktable extension Digital display of the number of revolutions Digital display of the...

BEADING - 303

This beading machine represents a sophisticated evolution of normal beading machines. Due to its requisites it is built in a perfect and advantageous manner also for heavy-duty jobs without requiring specific ski...

HOSOKAWA Nautamix

• Manufacturer: Hosokawa

Usable volume 1500 L Conical container ∅ 1700/400 x 2200 mm Mixing screw runs parallel to the cone Drive 2.2 kW with gear Side outlet with pneumatic slide Supports

ARES 50PB

• Manufacturer: Ares

Trimming - Rounding machine Trimming - Rounding machine with shaped knives / Edge Pressing MachineThe 50PB machine has been designed for trimming and rounding off the edges of: belts, shoulder straps, strips - pa...

2003 Scm Si400e

• Manufacturer: SCM / SCMI
• Model: SI400E

SCM squaring machine mod. SI400E with CE standards Squaring carriage stroke mm 3200 Three controlled axes Electric ascent, descent, tilting of the blade unit Electronic parallel guide mm 1500 4 pendant controls w...

Ophthalmoscope L re-scope

With 3.5 V XL xenon lamp or 2.5 V HL halogen lamp. Easy to use with the semi-circular dial aperture, small, medium, and large circular diaphragm. Star mount. Slit and red filter with contrast enhancer. High-perfo...

Ophthalmoscope L re-scope

With 3.5 V XL xenon lamp or 2.5 V HL halogen lamp. Easy to use with the semi-circular dial aperture, small, medium, and large circular diaphragm. Star mount. Slit and red filter with contrast enhancer. High-perfo...