Used parallel in Lugano, Switzerland

FERPLAST TOSHIBA B-EX4T3 high resolution

• Manufacturer: Ferplast

High resolution printer Max. printing width 104 mm. TOSHIBA B-EX4T3 INDUSTRIAL PRINTER Toshiba B-EX4T3 600 dpi thermal transfer printer (16 dots ) The B-EX4T3 series printers are the optimal solution when you nee...

FERPLAST TOSHIBA B-EX4T1

• Manufacturer: Ferplast

Printer with print head NEAR EDGE resolution 203 or 300 dpi, printing width 104 mm TOSHIBA B-EX4T1 INDUSTRIAL PRINTER Toshiba B-EX4T1 direct thermal/thermal transfer printer (203 dpi - 300 dpi) The B-EX4T1 series...

SIGLENT SPD4323X

• Manufacturer: SIGLENT

4-channel programmable linear DC power supply, 240 W, 1mV/1mA resolution. CH1,CH2,CH3,CH4 max. voltage/current: 6V/3.2A, 32V/3.2A, 32V/3.2A, 6V/3.2A. Rated voltage: 32V, 12V, 30V Rated output power: 240W, 285W, 4...

SIGLENT SPD4121X

• Manufacturer: SIGLENT

4-channel programmable linear DC power supply, 285 W, 1mV/1mA resolution. CH1,CH2,CH3,CH4 max. voltage/current: 15V/1.5A, 12V/10A, 12V/10A, 15V/1.5A. Rated voltage: 32V, 12V, 30V Rated output power: 240W, 285W, 4...

SIGLENT SPD4306X

• Manufacturer: SIGLENT

4-channel programmable linear DC power supply, 400 W, 1mV/1mA resolution. CH1,CH2,CH3,CH4 max. voltage/current: 15V/1.5A, 30V/6A, 30V/6A, 15V/1A. Rated voltage: 32V, 12V, 30V Rated output power: 240W, 285W, 400W ...

Traditional lathe GRAZIANO SAG 210 x 1500 USED

• Manufacturer: Graziano

PARALLEL traditional lathe GRAZIANO SAG 210 x 1500 USED MACHINERY

DOUBLE ARM UNLOADER

The double-armed stacker crane makes it possible to unload the tanks parallel to the vehicle floor, with the consequent advantage of not spilling the material inside the crate.

TWINTEX LCR-7010

• Manufacturer: TWINTEX

RLC measuring bridge from 100 Hz to 10 kHz, accuracy 0.15% . Test parameter: |Z|, |Y|, C, L, X, B, R, G, D, Q, θ Test signal frequency: 100 Hz, 120 Hz, 1 kHz, 10 kHz Basic accuracy: 0.15% Equivalent circuit: seri...

KEMO VBF-14J

• Manufacturer: Kemo

Dual variable filters, high pass and low pass, 1 Hz to 100 kHz, series/parallel and independent

TONGHUI TH6413

• Manufacturer: TONGHUI

Triple programmable power supply, 2 outputs 0-60V / 0-3A / 180 W and output 0-6V / 0-5A / 30W. Rated output: Range 1: 0-60V, 0-3A, 180W Range 2: 0-60V, 0-3A, 180W Range 3: 0-6V, 0-5A, 30W Load regulation: Voltage...

TONGHUI TH6412

• Manufacturer: TONGHUI

Triple programmable power supply, 2 outputs 0-30V / 0-6A / 180W and output 0-6V / 0-5A / 30W. Rated output: Range 1: 0-30V, 0-6A, 180W Range 2: 0-30V, 0-6A, 180W Range 3: 0-6V, 0-5A, 30W Load regulation: Voltage:...

TWINTEX LCR-7030

• Manufacturer: TWINTEX

RLC measuring bridge from 100 Hz to 30 kHz, accuracy 0.1% . Test parameter: |Z|, |Y|, C, L, X, B, R, G, D, Q, θ Test signal frequency: 100 Hz, 120 Hz, 1 kHz, 10 kHz, 20 kHz, 30 kHz Basic accuracy: 0.1% Equivalent...

TWINTEX LCR-7200

• Manufacturer: TWINTEX

RLC measuring bridge from 40 Hz to 200 kHz (38 points), accuracy 0.1% . Test parameter: |Z|, |Y|, C, L, X, B, R, G, D, Q, θ Test signal frequency: from 40 Hz to 200 kHz (38 points) Basic accuracy: 0.1% Equivalent...

Millutensil AM 06 (2000x1270 mm)

• Manufacturer: Millutensil

The second model for small and medium size dies. The AM 06 is the first model with an hydraulic system controlled by electronic servo proportional valves and a control of parallelism. The control system includes ...

Millutensil AM 08 (2600x1470 mm)

• Manufacturer: Millutensil

The third model for medium size dies. The AM 08 is the first model with an hydraulic system controlled by electronic servo proportional valves and a control of parallelism. The control system includes measurement...