Building Filters
- Trusted Seller
2009 GEKA HYD 110 A
- Manufacturer: Geka
2 foot pedals for independent work at 2 stations hydr. drive flat bar shear with hydraulic downholder angle bar shear with minimum deformation by diagonal moving of the blade , with hydraulic downholder round and...
$17,075 USDVienna, Austria 
14 pieces of cylinders according to photos, different sizes, Festo, mint condition
- Manufacturer: Festo
14 pieces of cylinders according to photos, different sizes, Festo, mint condition Special price !! If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased...
$174 USDHerzogenburg, Austria- Trusted Seller
2016 Haas Automation VF 7/40
- Manufacturer: Haas
- Model: VF-7/40
The machine is in good technical condition, under power, after agreement is possible to test it. Power failure detection module. Automatic screw chip conveyor. Programmable cooling nozzle. Aerosol extraction. End...
Brno, Czech Republic - Trusted Seller
1999 Chiron Chiron FZ 28 L
- Manufacturer: Chiron
- Model: FZ28
- Spindle taper: ISO 50
Very good technical condition, working in the accuracy of 0.02-0.05 mm, can be tested after previous agreement. Concrete body of the machine, high-pressure cooling thru spindle, chip conveyor, holders and tools. ...
Brno, Czech Republic - Trusted Seller
2013 HURCO VMX 84
- Manufacturer: Hurco
- Model: VMX84
The machine is in very good technical condition, can be tested. Control system version: V09.01.3.993.21.Software options: Advanced Verification Graphic, DXF, NC Productivity Package, Industry Standard NC, Ultipoc...
Brno, Czech Republic - Trusted Seller
1983 WMW- FRITZ HECKERT FW 250X 1000/2
- Manufacturer: Heckert
- Model: FW 250
Machine dimensions: Accessoires: Impact head milling machine Support bearings Technical Documentation
Brno, Czech Republic - Trusted Seller
1970 TOS FA 4 AU
- Manufacturer: TOS
- Model: FA 4
Characteristic: Length of the working table: 1600 mm Width of the working table: 350 mm Power of the spindle drive: 7.5 kW Minimum distance of the spindle from the table: 40 mm Maximum distance of the spindle fro...
Brno, Czech Republic - Trusted Seller
1970 STANKO 6P 8
- Manufacturer: Stanko
- Model: 6P8
Machine dimensions : 2000 x 2100 x 2400 mm Working surface: 1300 x 320 mm | Motor power: 10 kW | Machine weight: 3100 kg
Brno, Czech Republic - Trusted Seller
2000 Deckel Maho DMU 80 P
- Manufacturer: Deckel / Maho
- Model: DMU 80 P
Equipment: Internal cooling Workpiece probe Chip conveyor Spindle cooling 2020: PILS contactors replacement New E / R module New X / Y module 2019: Lock replacement Workpiece probe sensor replacement Tool Clamp H...
Brno, Czech Republic - Trusted Seller
ELBE-WERKE DRESDEN AD 15-2
- Manufacturer: ELBE-WERKE DRESDEN
The machine is in a good technical condition. Length of the working table: 1400 mm | Width of the working table: 280 mm | Magnet length: 600 mm | Magnet width: 200 mm
Brno, Czech Republic - Trusted Seller
2025 GEKA HYD 55 S
- Manufacturer: Geka
- Model: HYD 55 S
2 foot pedal for independent working on 2 stations flatsteel station anglesteel station round- and square steel station rectangular notching station punching station table on flat steel station table on punching ...
$20,095 USDVienna, Austria - Trusted Seller
2003 Fehlmann PICOMAX 60-M HSC
- Manufacturer: Fehlmann
- Model: PICOMAX 60-M HSC
Very good technical condition, in this time not under power, but after agreement possible to see under power. Heidenhain iTNC 530 control system with hand wheel. 5 controlled axis (X, Y, Z, B, C). ATS 160 CNC B a...
Brno, Czech Republic - Trusted Seller
1994 STUDER RHU 500
- Manufacturer: Studer
- Model: RHU 500
Center height: 125 mm | Spindle speed: 2420 1/min | Distance between centers: 500 mm | Grinding wheel: 400 mm | Machine height: 1600 mm | Machine length: 1800 mm | Machine width: 1300 mm | Machine weight: 2200 kg
Brno, Czech Republic - Trusted Seller
1988 Reform AR61
- Manufacturer: Reform
Control system: Simatic | Length of the table: 2500 mm | Width of the table: 600 mm | Machine height: 2400 mm | Machine length: 11000 mm | Machine width: 3200 mm | Machine weight: 22000 kg | 2021: conversion of ...
Brno, Czech Republic - Trusted Seller
2004 TOS BU 28/630 CNC
- Manufacturer: TOS
Total power demand: 10 kVA | Maximum grinding length: 630 mm | Center height: 140 mm | Maximum weight of the workpiece: 65 kg | Spindle speed: 20-800 1/min | Distance between centers: 630 mm | Machine height: 16...
Brno, Czech Republic