Building Filters
- Trusted Seller
2010 DOOSAN DNM 400
- Manufacturer: Doosan
- Model: DNM 400
4th axis is not part of the offer Control system: Fanuc | Total hours: 103042 h | Hours on: 7915 h | Length of the working table: 920 mm | Width of the working table: 435 mm | X-axis travels: 762 mm | Y-axis trav...
Brno, Czech Republic - Trusted Seller
2011 SAHOS DYNAMIC FC 3000 CNC
- Manufacturer: SAHOS
Control system: HEIDENHAIN | Power of the spindle drive: 18 kW | X-axis travels: 3000 mm | Y-axis travels: 1500 mm | Z-axis travels: 1070 mm
Brno, Czech Republic - Trusted Seller
2005 ZPS H63
- Manufacturer: ZPS
Control system: Siemens | Length of the working table: 800 mm | Width of the working table: 630 mm | X-axis travels: 1010 mm | Y-axis travels: 800 mm | Z-axis travels: 1010 mm
Brno, Czech Republic - Trusted Seller
2004 Hitachi 254Y
- Manufacturer: Hitachi
- Model: 254Y
Control system: MARK-10W | Travel length x-axis: 410 mm | Travel length y-axis: 260 mm | Travel length z-axis: 210 mm | Axis u: 200 mm | Axis v: 200 mm | Wire diameter: 0.25 mm | Maximum workpiece dimensions: 68...
Brno, Czech Republic - Trusted Seller
Stanko 3T71M
- Manufacturer: Stanko
Maximum rotary speed of the spindle: 1360 1/min | Magnet length: 600 mm | Magnet width: 250 mm
Brno, Czech Republic - Trusted Seller
2003 Hitachi 254Z
- Manufacturer: Hitachi
- Model: 254Z
Equipment: Manual controller Slats Control system: FANUC | Length of the table: 400 mm | Width of the table: 250 mm | Maximum workpieces length (x): 400 mm | Maximum workpieces weight (z): 250 mm | Maximum workpi...
Brno, Czech Republic - Trusted Seller
2025 KOVOSVIT MAS, a.s. MCV 1000
- Manufacturer: MAS - Kovosvit
- Model: MCV 1000
- Spindle taper: ISO 40
spindle motor: Siemens 1PH8 19.5kW control system: Heindenhain TNC620 HSCI, screen MC 8410 touch screen workpiece/tool probe: YES Heidenhain TS460/NO handwheel: YES Heidenhain HR510FS measuring, rulers: Heidenh...
Brno, Czech Republic - Trusted Seller
Brno, Czech Republic - Trusted Seller
2018 Doosan DNM 750 II
- Manufacturer: Doosan
- Model: DNM 750 II
The machine is in good technical condition, under power, after agreement is possible to test it. Chip conveyor, RENISHAW TS27R tool probe, RENISHAW OMP-60 workpiece probe, oil separator.
Brno, Czech Republic - Trusted Seller
GEKA PAX
- Manufacturer: Geka
- Model: Pax
The PAX series positions the material along the X-axis for sequential, multiple punching of profiles. Other sizes for X-axis on request. The punching machine is not included in that price. If ordered together wit...
$41,584 USDVienna, Austria - Trusted Seller
2021 Haas Automation VR-8
- Manufacturer: Haas
- Model: VR-8
The machine is in excelent condition, low working hours and mainly in Aluminium, at very good price! Under power, can be tested after agreement. More specs here: Tool probe and work piece probe included. Total O...
Brno, Czech Republic - Trusted Seller
2009 GEKA HYD 110 A
- Manufacturer: Geka
2 foot pedals for independent work at 2 stations hydr. drive flat bar shear with hydraulic downholder angle bar shear with minimum deformation by diagonal moving of the blade , with hydraulic downholder round and...
$17,075 USDVienna, Austria - Trusted Seller
TOS 2UC/750
- Manufacturer: TOS
- Model: 2UC
Grinding diameter: 290 mm | Distance between centers: 750 mm | Machine weight: 2300 kg
Brno, Czech Republic - Trusted Seller
1999 Junker BUAJ 30
- Manufacturer: Junker
- Model: BUAJ 30
Table dimensions: 1380x160 mm | Distance between centers: 630 mm | Machine weight: 2800 kg
Brno, Czech Republic - Trusted Seller
2006 Chmer CM A64C
- Manufacturer: Chmer
- Model: CM
Table dimensions: 800 x 500 mm | Maximum travel length x-axis: 600 mm | Maximum travel length y-axis: 400 mm | Maximum travel length z-axis: 350 mm | Maximum table load: 1500 kg | Maximum electrode weight: 100 k...
Brno, Czech Republic