Building Filters
TECHNOSOFT iPOS3604 VX-CAN 9-36V 4A 144W CANopen or EtherCAT
- Manufacturer: Technosoft
Intelligent, compact and freely programmable motor controller For brushless, DC brush and step motors Motor supply / logic supply: 9 – 36 VDC Output current: 4 A continuous; 10 A peak current Communication via RS...
Neuchâtel, SwitzerlandTECHNOSOFT iPOS3602 VX-CAN 9-36V 2A 75W CANopen or EtherCAT
- Manufacturer: Technosoft
Intelligent, compact and freely programmable motor controller For brushless, DC brush and step motors Motor supply / logic supply: 9 – 36 VDC Output current: 2 A continuous; 3.2 A peak current Communication via R...
Neuchâtel, Switzerland
2009 Hans Hundegger Maschinenbau GmbH K2i 625
- Manufacturer: Hans Hundegger Maschinenbau GmbH
TECHNICAL DETAILS Year of manufacture 2009 - EKP control system Max. processing cross-section 300 mm x 625 mm Fully automatic wood infeed with infeed and cross-feed conveyor for a length of 13 m Under-table pivot...
Switzerland
2008 Homag Optimat KAL 210/6/A20/S2
- Manufacturer: Homag
- Model: Optimat
Description The HOMAG Optimat KAL 210/6/A20/S2 is a single-sided automatic edge gluing and finishing machine for maximum precision and efficiency in panel processing. Ideal for industrial applications and profess...
Switzerland
2025 Lemken Spica 8/900
- Manufacturer: Lemken
- Model: SPICA 8900
Main tank nominal volume 900 liters Stainless steel container base Oscillating agitator via two spring tines Spreading unit 9-18m Application rate reduction 3-60 kg/ha for slug pellets Slider unit can be controll...
Rickenbach, Switzerland
2006 Krüsi Maschinenbau AG Krüsimatic G2
- Manufacturer: Krüsi Maschinenbau AG
Condition & Revision The machine has been completely overhauled by Krüsi Maschinenbau AG. It will receive a new control system, regulators, servo motors, and cabling – with a 12-month warranty on mechanics and ne...
Switzerland
2024 Valtra N155 Direct
- Manufacturer: Valtra
- Model: N155
- Horsepower: 162.2636727501007 horsepower
- Hydraulic flow rate: 199.8 liters per minute
40 km/h, Ecospeed Direct stepless drive Suspension front axle, rotating front wheel fender Compressed air system EU + Duomatic, load sensing, 160 liter hydraulic pump Front hydraulics and front PTO, 2 lines to...
Rickenbach, Switzerland
SCM Sandya 300 RCS 1100 wide belt sander
- Manufacturer: SCM / SCMI
- Model: Sandya
ID No. 6076 - used machine - Pneumatically controlled units - Electronic adjustment of the working height - 4 programmers storable - ready for operation
Kugelmann 301 Salzstreuer
- Manufacturer: Kugelmann
300 liters, 3-point linkage, hydraulically driven, with control unit, without speed sensor
2015 Kugelmann 301 Salzstreuer
- Manufacturer: Kugelmann
300 liters, 3-point linkage, hydraulically driven, with control unit, without speed sensor
#10127; Mesh welding system MG230 Superflex
Year: 1992 (obsolete in 2024/25) Working range: Grid width: max. 3350 mm / min. 1000 mm Grid length: max. 9000 mm / min. 2500 mm Line wire pitch: infinitely adjustable, min. 75 mm Cross wire pitch: min. 100 mm L...
Schlieren, Switzerland
2007 AGIECHARMILLES MIKRON HSM400U – – 5 Axis machining center
- Manufacturer: Agie - Charmilles
- Model: HSM400
Always in connection. SPECIAL GRAPHITE WITH EXTRACTION UNIT INCLUDED • 5 axes• 42,000 rpm spindle • 21-pallet Erowa changer • HSK63 • Year 2007 • 40,000 h • No coolant – Used for graphite • Heidenhain 530i contro...
Rolle, SwitzerlandF-DGSi Liquid Nitrogen Generator with Air Compressor (standalone unit) - 230V - 20L/DAY, ea.
The CRYOGEN is a range of stand-alone Liquid Nitrogen Generators. Utilising a reliable ‘Cryo-refrigerator’ design of cold head technology and helium compressor, the nitrogen gas is then produced using the PSA tec...
Böckten, SwitzerlandF-DGSi Liquid Nitrogen generator with air compressor (standalone unit) - 415V - 60L/Day, ea.
The CRYOGEN is a range of stand-alone Liquid Nitrogen Generators. Utilising a reliable ‘Cryo-refrigerator’ design of cold head technology and helium compressor, the nitrogen gas is then produced using the PSA tec...
Böckten, SwitzerlandF-DGSi Liquid Nitrogen generator with air compressor (standalone unit) - 230V - 20L/Day, ea.
The CRYOGEN is a range of stand-alone Liquid Nitrogen Generators. Utilising a reliable ‘Cryo-refrigerator’ design of cold head technology and helium compressor, the nitrogen gas is then produced using the PSA tec...
Böckten, Switzerland