Search By Category

Search By Manufacturer

Search By Canton

Building Filters

285

Used control unit in Switzerland

  • Trusted Seller
    2018 SAEILO M-1000 Ref No:

    2018 SAEILO M-1000 Ref No: 47878

    • Manufacturer: SAEILO

    Inspection under power is possible Object: 47878 | Controls: HEIDENHAIN ITNC 620 | Number of processing axes (excl parallel axes): 3 | .. among of them simultaneous cnc axes: 3 | X-axis travel: 1000 mm | Y-axis ...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1976 FEINTOOL HFA 6300 Ref

    1976 FEINTOOL HFA 6300 Ref No: 32866

    • Manufacturer: FEINTOOL

    + press rebuilt in 2011 with new hydraulics and new electrics + roller feeders with manual height adjustment + press frame reinforced with 4 tie rods complete line currently dismantled and lying on stocks

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2007 SCHMID HSR400 Ref No:

    2007 SCHMID HSR400 Ref No: 51084

    • Manufacturer: Schmid
    • Model: HSR400

    including coil line SARONNI with direct feed - hydraulic opening for cleaning - band guides at outlet - proportional pressure reducer for drive rollers

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1995 GEIBEL+HOTZ FS 635 SA

    1995 GEIBEL+HOTZ FS 635 SA Ref No: 48749

    • Manufacturer: GEIBEL+HOTZ
    • Grinding length: 600 millimeter

    borehole: diameter: 76.2 mm Object: 48749 | Controls: SIEMENS S5 95U | Grinding length: 600 mm | Grinding width: 350 mm | Distance of axis of horizontal spindle - clamping surface (max.): 525 mm | Workpiec...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2005 AXA VHC 3 -

    2005 AXA VHC 3 - 8000S Ref No: 49506

    • Manufacturer: AXA

    X = 8000mm or 2x 3750mm pendulum stroke (vertical) - Internal cooling 40 bar - Coolant tank 800 liters - Belt filter - 3 D radio measuring probe - Raising the machine table by 70mm - Table load 1200kg/m² - Machin...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2012 LEADWELL LCV-760 Ref No:

    2012 LEADWELL LCV-760 Ref No: 52076

    • Manufacturer: Leadwell

    Accessories - Chip conveyor Object: 52076 | Controls: FANUC | Number of processing axes (excl parallel axes): 3 | X-axis travel: 760 mm | Y-axis travel: 610 mm | Z-axis travel: 610 mm | Distance spindle nose -...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2009 LEADWELL LCV-760 Ref No:

    2009 LEADWELL LCV-760 Ref No: 52007

    • Manufacturer: Leadwell

    Accessories - Chip conveyor Object: 52007 | Controls: FANUC | Number of processing axes (excl parallel axes): 3 | X-axis travel: 760 mm | Y-axis travel: 610 mm | Z-axis travel: 610 mm | Distance spindle nose -...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2014 VICTOR VCENTER-55 APC Ref

    2014 VICTOR VCENTER-55 APC Ref No: 48354

    • Manufacturer: Victor
    • Model: Vcenter-55

    Reconditioned spindle and new spindle motor: August 2023 Spindle hours approx.: 18,000 hours (new spindle 1,057 hours)

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2016 MAZAK FJV 35/60 Ref

    2016 MAZAK FJV 35/60 Ref No: 51124

    • Manufacturer: Mazak
    • Model: FJV-35/60

    Machine comes without coolant system but with a high-pressure pump. The magnetic plates are not included but can be purchased if you are interested. Includes precisely calibrated and ready-to-use Brankamp monitor...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2000 BENELLI 650T/3MR/2/12/3750X1100/LD/ET3 Ref No:

    2000 BENELLI 650T/3MR/2/12/3750X1100/LD/ET3 Ref No: 48090

    • Manufacturer: Benelli

    Press equipped with 2 feeing lines - one from the side for blank cutting in transfer mode and one in line for for progressive die operation.

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2008 PAMA SPEEDCENTER

    2008 PAMA SPEEDCENTER

    • Manufacturer: Pama

    Control: SIEMENS SUNUMERIK 840 D | Time under power: 52198 Heures | Working time: 13872 Heures | Longitudinal travel (x-axis): 2000 mm | Transversal travel (y-axis): 1600 mm | Vertical travel (z axis): 1800 mm |...

    Brügg, Switzerland
  • 2001 Bütfering Classic 213 CE

    2001 Bütfering Classic 213 CE

    • Manufacturer: Butfering
    • Model: Classic

    Main Technical Specifications Segment Sanding Shoe Drives Optional 2- or 3-speed drive or continuously variable (2–18 m/s) Feed Cleaning and Brushing Device Extraction Minimum extraction flow: Sanding belts: 2 × ...

    $21,263 USD
    Switzerland
  • Trusted Seller
    1994 KAISER KSTU ZA 2000-15P

    1994 KAISER KSTU ZA 2000-15P Ref No: 43706

    • Manufacturer: Kaiser

    + Coil feed line KOHLER with straightener KRE2 18.260/19 + Feeder KAISER KWV 250 + 2-axis gripper bars transfer SANDER with adjustable pitch + table cushion rail with various cushions and fillers (separate data s...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2017 DMG MORI NHX 5000

    2017 DMG MORI NHX 5000 Ref No: 51783

    • Manufacturer: DMG Mori
    • Model: NHX 5000

    Accessories - Chip conveyor Object: 51783 | Controls: SIEMENS 840 D CELOS | Number of processing axes (excl parallel axes): 4 | X-axis travel: 730 mm | Y-axis travel: 730 mm | Z-axis travel: 880 mm | Rotating ...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2021 DMG MORI NHX 5000

    2021 DMG MORI NHX 5000 Ref No: 51794

    • Manufacturer: DMG Mori
    • Model: NHX 5000

    Accessories - Chip conveyor Object: 51794 | Controls: SIEMENS 840 D CELOS | Number of processing axes (excl parallel axes): 4 | X-axis travel: 730 mm | Y-axis travel: 730 mm | Z-axis travel: 880 mm | Rotating ...

    Niederhelfenschwil, Switzerland
1112131415