Building Filters
- Trusted Seller

UNIMARK UM 75.2
Year: 2009 Condition: good Configuration: * manual gilding machine UNIMARK UM 75.2 Specifications: * maximum pressure - 1000 kg * fixed table size - 200x 250 mm * heated head size - 120x155 mm - 110x300 mm * 2...
Čestlice, Czech Republic - Trusted Seller

2004 ApenGroup AermaxLine PKA 190N-
- Manufacturer: ApenGroup
Pressure: 230 Pa | Airflow: 1400 m³/h | Nominal heat input: 210 kW
Brno, Czech Republic 
2010 IN 1350H/200
- Manufacturer: ENGEL AUSTRIA
Series: insert | Machine type: IN 1350H/200 | Drive: hydraulic | Safety standard: CE | Injection unit type: Horizontal | Injection unit: 1350 | Screw diameter: 70 mm | Max. injection capacity: 1001 cm³ | Injecti...
Czechia- Trusted Seller
Brno, Czech Republic - Trusted Seller

2021 Maolong ABC-15-00
- Manufacturer: Maolong
Pressure: 1500 kN | Table dimensions: 2300 x 1600 mm | Power input: 22 kW
Brno, Czech Republic - Trusted Seller

2010 Epsilon E140Z
- Manufacturer: Epsilon
- Model: E140Z
Maximum lifting capacity: 1.4 t | The hydraulic arm was manufactured in 2014 and has been completely serviced this year. the hydraulic control valves were resealed all hydraulic hoses replaced all hydraulic cyli...
Brno, Czech Republic - Trusted Seller

Haas Automation TM - 1 HE
- Manufacturer: Haas
- Model: TM-1
The machine is in good technical condition, under power, after agreement is possible to test it.
Brno, Czech Republic - Trusted Seller

2018 Haas Automation MINIMILL
- Manufacturer: Haas
- Model: MINIMILL
- Spindle taper: SK 40
Machine in excelent condition, under power can be tested anytime after agreement.
Brno, Czech Republic - Trusted Seller

2015 Haas Automation DM-1
- Manufacturer: Haas
- Model: DM-1
- Spindle taper: CT 40
The machine is in good technical condition, under power, after agreement is possible to test it. Additional 4 and 5 axis. The machine is with half of the accessories shown in the photo.
Brno, Czech Republic - Trusted Seller

2015 Haas Automation VM 6
- Manufacturer: Haas
- Model: VM-6
- Spindle taper: BT 40
The machine is in good technical condition possibile to test on power. The machine has a 4th and 5th axis.
Brno, Czech Republic - Trusted Seller

2015 Haas Automation VF 2
- Manufacturer: Haas
- Model: VF-2
- Spindle taper: BT 40
The machine is in very good condition, it is possible to test it.
Brno, Czech Republic - Trusted Seller

2017 Haas Automation ST-25
- Manufacturer: Haas
- Model: ST-25
- Spindle bore: 76 millimeter
The machine is in good condition, it can be retested.
Brno, Czech Republic - Trusted Seller

2007 Haas Automation SL-30 THE
- Manufacturer: Haas
- Model: SL-30
- Spindle bore: 76 millimeter
The machine is good condition, under power, possible to test it.
Brno, Czech Republic - Trusted Seller

2010 Haas Automation ST-30
- Manufacturer: Haas
- Model: ST-30
- Spindle bore: 88.9 millimeter
The machine is in good technical condition, under power, after agreement is possible to test it.
Brno, Czech Republic - Trusted Seller

2020 Haas Automation ST-30
- Manufacturer: Haas
- Model: ST-30
- Spindle bore: 88.9 millimeter
The machine is in good technical condition, under power, after agreement is possible to test it.
Brno, Czech Republic
