Building Filters
Pardubice, Czech Republic- Trusted Seller
2001 TRUMPF SheetMaster
- Manufacturer: Trumpf
- Model: SheetMaster
The SheetMaster loads and unloads a die cutter or combination machine and reliably sorts parts. Vacuum suction cups lift sheets or blanks from the loading station and move them to the machine table. SheetMaster p...
Prague, Czech Republic - Trusted Seller
2006 HAAS VF2
- Manufacturer: Haas
- Model: VF-2
- Spindle taper: BT 40
Control system: HAAS AUTOMATION | Length of the working table: 914 mm | Width of the working table: 356 mm | Maximum table load (evenly distributed): 1361 kg | X-axis travels: 762 mm | Y-axis travels: 406 mm | Z...
Brno, Czech Republic - Trusted Seller
Haas VF2 I Vertical Machining Center I 2006
- Manufacturer: Haas
- Model: VF-2
- Spindle taper: BT 40
We hereby offer this used Haas VF 2 vertical machining center from 2006, located in Czech Republic. Equipped with a robust Haas control unit, it features a working area of 914 x 356 mm, a 7500 rpm spindle speed, ...
Czechia - Trusted Seller
DC 10/60
Duplo DC 10/60 - year: 2006 - 1. counter: 8,5M - year: 2006 - 2. counter: 10,4M - condition: good, functional - inspection possible Configuration: - 1x DC 10/60 - 10 stations - connection bridge - 1x DC 10/60 ...
Čestlice, Czech Republic - Trusted SellerAuction
FLIR - i40 - 2009 - thermal camera
- Manufacturer: Flir
- Model: i40
functional condition corresponds to normal wear and tear
Lovosice, Czech RepublicVisit Auction Website 
2019 Stäubli TX60L
- Manufacturer: Stäubli
Stäubli TX60L with CS8C control unit SP1 - manual control pendant with 7m cable Absolute calibration 5m interconnect cable (used - as a new)
$25,229 USDCzechia
2017 Stäubli TX90 XL
- Manufacturer: Stäubli
Stäubli TX90XL ESD robot with CS8C control and SP1 control panel. The robot is equipped with a special ESD cover for work in a demanding electrotechnical environment. The robot was regularly serviced according ...
$15,841 USDPardubice, Czech Republic
2016 Stäubli TS80
- Manufacturer: Stäubli
We offer for sale a 4-axis scara robot Stäubli TS80 with a reach of 200 mm, which was used in an assembly application. The robot has been regularly maintained every year and this kit includes a CS8C controller, a...
$6,454 USDPardubice, Czech Republic
2017 Stäubli TX200
- Manufacturer: Stäubli
The Stäubli TX200 industrial robot underwent a diagnostic test by the Stäubli service team, which confirmed the current state of the new machine. The robot has a total of 400 engine hours. The service log is atta...
Pardubice, Czech Republic
2017 Stäubli RX160
- Manufacturer: Stäubli
We offer a Stäubli RX160 robot that has only been in operation for 4000 engine hours. The robot was purchased from the BOSCH factory, where it was deployed only at the beginning of the project (proof of concept)...
Pardubice, Czech Republic
2009 Stäubli TX90L
- Manufacturer: Stäubli
We offer a Stäubli TX90 or TX90L robot with CS8C control. The robot is level C after robot maintenance by Stäubli service. The TX90 robot has a reach of 900 mm. The TX90L robot has a reach of 1200 mm. We supp...
$6,454 USDPardubice, Czech Republic
2023 Fanuc R2000ic/210F, DCS
- Manufacturer: Fanuc
- Model: R-2000iC/210F
We offer a new Fanuc R2000ic/210F robot including DCS and Profinet The robot is unpacked and fully functional. This model boasts a high payload of 210kg, making it capable of handling virtually any heavy handli...
$30,509 USDPardubice, Czech Republic
2016 Stäubli TX60
- Manufacturer: Stäubli
We offer a robot with a reach of 600 mm and a load capacity of 5 kg. The robot is in excellent condition, disassembled from the existing machine and ready for shipment or presentation to the customer. The robot ...
$11,148 USDPardubice, Czech Republic
Stäubli TX2-90
- Manufacturer: Stäubli
Technical Specifications: - Maximum load: 20 kg - Nominal load: 7 kg - Reach: 1000 mm - Number of degrees of freedom: 6 - Repeatability according to ISO 9283: ± 0.03 mm Pneumatic connection: - 2 direct lin...
$22,882 USDPardubice, Czech Republic