Used automated in Geneva, Switzerland

TECHNOSOFT iPOS4810 MZ-CAT 11-50V 10ARMS 700W EtherCAT

• Manufacturer: Technosoft

Intelligent, compact and freely programmable motor controller For brushless rotary and linear motors, voice coils, DC brush and step motors Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-...

TECHNOSOFT iPOS4808 BX-CAT 11-50V 8A 400W EtherCAT

• Manufacturer: Technosoft

Intelligent, compact and freely programmable motor controller For brushless, DC brush and step motors Motor supply / logic supply: 11 – 50 VDC / 12 – 36 VDC Output current: 8 A continuous; 20 A peak current Commu...

TECHNOSOFT iPOS4815 MZ-CAT 11-50V 15ARMS 1kW EtherCAT

• Manufacturer: Technosoft

Intelligent, compact and freely programmable motor controller For brushless rotary and linear motors, voice coils, DC brush and step motors Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-...

TUBE TEST STAND BOT45-2V250

Test bench for tubes with clamping type 2 "internal radial" or 8 "self-adapting overpressure joints" for tubes with elliptical shape error. The reaction bridges are connected by threaded columns which allow to co...

BV-PMC/650W Vertical Test Stand

The compression force is controlled automatically and proportionally to the water pressure inside the valve. The mobile bridge in the upper part allows the loading of the valve and also the possibility of having ...

BOT-2CSC/1200 tube test bench

Tube testing bench with combined clamping: internal radial clamping + pressure clamping system. The mobile bridge is moved by a hydraulic motor. The loading is carried out in a vertical plane by a crane, while th...

BOR-2CV/600 Tiltable Test Stand

The mobile bridge moves on two threaded screws which ensure the total absence of external forces on the valve body. This feature makes the bench comply with the requirements of international test standards. In ad...

MULTIPOSTEBV-CC3V60H TEST BENCH

3 X 15TON test bench with automatic actuators - type 2 and type 7 clamping Three-station vertical test stand with internal radial clamping. The adjustment to the valve length is done by a threaded column on the u...

Test bench for BPA-250K actuators

Rated torque: 250,000 Nm | Range: 10-100% | Torque measurement: Indirect | Angle range: 0⁰ - 90⁰ | Reset to zero: -5,0⁰ - +5⁰ | Dynamic test simulation: Dynamic brake | Dimensions: 2700 x 2600 x 1600

Assembly line BO-CV/40SA

It is also possible to test a very wide range of valves of different sizes. This is made possible by the bank, depending on the valve declared is positioned both vertically and horizontally. The entire transport ...

UNIDAD DE PRESURIZACIÓN THINK PC PROGETTI SKC-100

Presurement skid for the resistance cycle in the trunnion valves. The system supplies a total flow rate of 0.7 l/min (0.5 l/min in the downstream side and 0.2 l/min in the cavity). The control system can be conne...

TESTREC certification software

The program can be used with all PROGETTI PC test benches. It is equipped with a MODBUS interface for SKM skids and a SYSWAY interface for SKA skids with Ethernet or RS232 communication protocol. Easy to set up, ...

Horizontal test bench BO30-2CV/500

Test bench with combined clamping: internal radial clamping + pressure clamping system. The mobile bridge moves on two threaded screws that ensure the total absence of external forces on the valve body, while a h...

BO-2V/450SH horizontal test bench

The mobile bridge moves on two threaded screws which ensure the total absence of external forces on the valve body. Thanks to this feature, the bench complies with international test standards. In the lower part,...

Horizontal test bench BO45-2CV/3000

Both clamping systems are available: pressure clamping and radial internal clamping. The bench is equipped with two threaded screws. The mobile bridge is moved by a hydraulic motor. Loading is carried out in a ve...