Used automated in Geneva, Switzerland

BPA-250K Actuator Test Bench

Rated torque: 250.000 Nm | Range: 10-100% | Torque measurement: Indirect | Range of angles: 0��� ��� 90��� | Reset: -5,0��� ��� +5��� | Dynamic test simulation: Dynamic brake | Dimensions: 2700 x 2600 x 1600

Assembly line BO-CV/40SA

It is also possible to test a very wide range of valves of different sizes. This is made possible by the bench, which is positioned both vertically and horizontally depending on the valve being tested. The entire...

PRESSURE UNIT THINK PC PROGETTI SKC-100

Pressure skid for cycle resistance in the trunnion vehicles. The system provides a total flow rate of 0.7 l/min (0.5 l/min in the downward direction and 0.2 l/min in the cavity). The control system can be connect...

TESTREC certification software

The program can be used with all PROGETTI PC test benches. It is equipped with a MODBUS interface for SKM skids and a SYSWAY interface for SKA skids with Ethernet or RS232 communication protocol. Easy to set up, ...

Horizontal test bench BO30-2CV/500

Test bench with combined clamping: internal radial clamping + pressure clamping system. The movable bridge moves on two threaded screws that ensure the total absence of external forces on the valve body, while a ...

Horizontal test bench BO-2V/450SH

The mobile bridge moves forward on two threaded screws that ensure the complete absence of external forces on the valve body. Thanks to this feature, the bench complies with international testing standards. In th...

Horizontal test bench BO45-2CV/3000

Two clamping systems are available: pressure clamping and internal radial clamping. The bench is equipped with two threaded screws. The mobile bridge is moved by a hydraulic motor. Loading is carried out vertical...

Horizontal test bench BO-2V/1800

The mobile reaction bridge moves via two screwed columns that ensure the complete absence of external forces on the valve body. This feature makes it compliant with international testing standards. In the lower p...

BOT-2CV/2000 tube test bench

Tube test bench with combined clamping: internal radial clamping + pressure clamping system. The mobile bridge is moved by a hydraulic motor. Loading is carried out vertically by a crane, while final positioning ...

PROGETTI THINK PC HORIZONTAL TEST BENCH BO-C/90SH

90 TON Test Bench with Type 1 Clamping Horizontal test bench with pressure clamping. The pressure force is automatically configured according to the valve size and class, adapting proportionally to the pressure i...

BV-5C HE/10 vertical test bench

Reaction force: 10 T | Permitted products: Natural gas pressure reducer range �����-3 (DN15-DN80) | Maximum length: 400 mm | Length min: 140 mm | H max: 400 mm | H min: 140 mm | Permitted terminations: BW RJ | D...

A06B-6088-H322 H500 Variateur de broche Fanuc SPM22 Type II

• Manufacturer: Fanuc
• Model: A06B-6088-H322

Moteur FANUC neuf A06B-0127-B675

• Manufacturer: Fanuc
• Model: A06B-0127-B675

TELEMECANIQUE ALTIVAR ATV18U41N4 servo drive

• Manufacturer: Telemecanique

2020 FENDT 211 TMS

• Manufacturer: Fendt
• Model: 211 VARIO
• Hours: 2,020 hour

Mileage: 0 | Wheel base: mm | Payload: Kg | Total weight: Kg | Total gross load: Kg | Engine: ccm | Cylinders: 3 | Hp: 110PS | Body: Agricultural machines | Remarks: NEUFAHRZEUGE Produktion 2020 Vario TMS, mit K...