Used applicators in Hamburg, Germany

550 liter ex-proof agitator vessel, AISI 304

EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

1000 liter pressure containers, Aisi 304

• Manufacturer: Thyssen Umformtechnik

Technical documentation: German Technical Supervisory Association TÜV documents notice: some residues of previous content, dents at the insulation jacket, traces of usage remarks: partially slight differences in ...

1995 Hymmen MTC 1400 103512

• Manufacturer: Hymmen

Control: hand | Working height: 850-920 mm | Application roller width: 1350 mm | Workpiece thickness max mm: 80 | Workpiece length min mm: 300 | Feed transport min/max: 30-120 | Mode of transport: tape | Pump sy...

Sorbii Smart Coater M 102470

• Manufacturer: Sorbii

Workpiece width min-max mm: 1.300 | Workpiece length min- max mm: 350 | Workpiece height min- max mm: about 3 - 80 | Use page: right | Working height: 880 | Paint-applying units: 1 | Feed transport m / min min -...

Purete PRT-R2106 102328

• Manufacturer: Purete

Control: Siemens | Program: HMI | Workpiece width min-max mm: 620 | Workpiece length min- max mm: 300 | Workpiece height min- max mm: 3 - 80 | Passage width min-max mm: 320 | Use page: right | Working height: 88...

600 liter mobile pharmacy pressure tank, Aisi304 with magnetic agitator

• Manufacturer: GUTH

max. allowable working temperature: 144 °C max. allowable working overpressure (dj): 5.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 144 °C Temperature control ...

300 liter mobile pharmacy pressure tank, Aisi304 with magnetic agitator

• Manufacturer: GUTH

max. allowable working temperature: 144 °C max. allowable working overpressure (dj): 5.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 144 °C Temperature control ...

2000 liter agitator tank, Aisi 304 with lateral inclined blade agitator

remarks: Base plates of the feet made of Fe (1 base plate with hole; see photos) EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

42610 liter pressure tank, Aisi 304

Volume: 42.610 liter | Max. excess pressure: 2.6 bar | Bottom: torispherical bottom | Diameter outside: 2.400 mm | Cylindrical length: 8900 mm | Total height: 3.220 mm | Wall thickness lower bottom: 7 mm | Wall ...

10000 liter horizontal agitator tank; Aisi304 with propeller agitator

Volume: 10.000 liter | Stand type: legs | Quantity legs: 4 Piece | Insulation: available | Insulating jacket: hermetically welded | Diameter inside: 2.000 mm | Diameter outside: 2.100 mm | Cylindrical length: 32...

2500 Liter tank, Aisi 304

remarks: 1 manhole approx. 310 x 410 mm in the cylinder; 1 screwed outlet fitting with butterfly valve enlarges the outlet to DN 50 DIN 11851; tanks were professionally cleaned and overhauled in 2024; brand new r...

600 liter pressure container, Aisi 304

• Manufacturer: Stöcklin

remarks: Partly slightly larger residues of fruit pulp inside

982 liter pressure tank, Aisi 304

• Manufacturer: Thyssen Umformtechnik (UCON)

remarks: Slight corrosion on the insulating jacket (upper bottom)

2500 liter tank, Aisi 304

remarks: 3 support brackets,Aisi 304; The flange ring of the manhole is made of Fe

6000 liter tank, Aisi 304

manhole: in the cylinder (appr. 340 x 440 mm), in the upper bottom remarks: Diameter manhole upper bottom approx. 410 mm; slight metallic discoloration inside the tanks