Used applicators in Hamburg, Germany

PAC 0.99 m² stainless steel pharmaceutical heat exchanger

• Manufacturer: PAC Pharma-Anlagen-Consult GmbH

max. allowable working overpressure double jacket: 6,0 bar max. allowable working temperature in tube side: 144 °C max. allowable working overpressure in tube side: 7,0 bar

630 liter mobile cone container, Aisi 316 with Halar coating

• Manufacturer: chematec

max. allowable working temperature: 80 °C remarks: Frame, Fe (galvanized); Container made of 1.4435 (Aisi 316) with plastic inner coating

1000 liter IBC round container, Aisi 316

• Manufacturer: eurocont

remarks: Slight differences in design; 1 container with 2 welded struts in the manhole (see photos)

36400 liter heat-/coolable horizontal pressure tank, Aisi 304

• Manufacturer: Ziemann Holvrieka

Temperature control cylinder (dj): squared half-coil remarks: 1 manhole approx. 360 x 440 mm in the front bottom; 3 loose bearing saddles each made of Fe (galvanized); 1 cut-off connection diameter 100 mm at the ...

3000 liter pressure tank, Aisi 304

• Manufacturer: Edel

remarks: Manhole diamter approx. 300 x 395 mm (manhole cover missing)

12600 liter tank, Aisi 316

notice: some residues of previous content, manhole cover is missing

3990 liter pressure tank, Aisi 304

• Manufacturer: Edel

remarks: 1 former connection in the cylinder was welded shut by the previous operator

420 liter pressure tank, Aisi 316

• Manufacturer: Metkon AG

max. allowable working temperature: 50 °C remarks: 4 support brackets, st. st.; Hand hole diameter approx. 210 mm

1000 liter tank, Aisi 304

Volume: 1.000 liter | Lower bottom: flat bottom | Stand type: legs | Quantity legs: 3 Piece | Diameter inside: 950 mm | Cylindrical height: 1.500 mm | Total height: 2.200 mm | Manhole: in the upper bottom (Ø 400...

6000 liter tank, Aisi 304

• Manufacturer: Ritter (HBB Hildesheimer Behälterbau)

remarks: Manhole diameter 420 mm; 1 tank slightly lower in total height; Butterfly valves of the outlets defective; Various pipes on the tanks (mostly cut off)

80 liter tank, Aisi 316 with inner coating

notice: some residues of previous content, bump at the insulation jacket remarks: Tank with inner coating made of plastic (see photos); double outlet DN 25

5000 liter tank, Aisi 304

remarks: Manhole diameter approx. 390 mm; 1 overflow pipe and short pipes from external connections inside the tank (see photos); 2 height-adjustable screws of the feet are missing

5520 liter tank, Aisi 304

• Manufacturer: Pierre Guerin

notice: some residues of previous content, pipe end cut flush, Metallic discolouration inside remarks: Manhole diameter 450 mm (suspension of the manhole cover incomplete)

6100 liter tank, Aisi 304

remarks: pipelines inside the tank (see photos); diameter manhole approx. 400 mm

6000 Liter heat-/coolable agitator vessel, Aisi 304 with wall scraping anchor agitator and blade stirrer

• Manufacturer: Behälter KG

Temperature control cylinder (dj): squared half-coil temperature control bottom (dj): square half-coil remarks: before tank stood on 4 tube feet made of mild steel , but there is only 1 of them still present; hea...