Used applicators in Hamburg, Germany

1000 Liter IBC Container, Aisi 304

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: Frame, Fe (galvanized); 1 additional manhole cover with built-in Liquifant; small dents in the upper bottom (see photos)

1000 liter IBC Container, Aisi 304

• Manufacturer: Thielmann (UCON)

remarks: Frame, Fe (galvanized; partly slightly bent or showing signs of corrosion); slight differences in the design of the containers possible; Smaller dents in the container walls are possible in some cases; s...

5000 liter tank, Aisi 304

remarks: Manhole approx. 310 x 410 mm; small dents in the cylinder

1000 liter IBC container, Aisi 304

• Manufacturer: Umformtechnik Hausach (UCON)

notice: some residues of previous content, manhole cover is missing

1000 liter Container, Aisi 304

remarks: Frame, Aisi 304; Container with dents, especially in the lower bottom; stack struts partially bent; 1 DN 40 connection in the container wall (see photos)

1050 liter container, Aisi 304

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: Frame, Fe (lacquered); 1 longitudinal sight glass; ball valve glued;

1000 liter mobile bulk container, Aisi 316

remarks: Diameter manhole 380 mm; mobile frame Aisi 304; basic dimensions inside appr. 990 x 1180 mm; 2 x outlet with gauze insert (one of these two containers with a dent on top; see photos); 2 containers with o...

100 liter IBC container, Aisi 304

• Manufacturer: UCON

Volume: 100 liter | Total height: 570 mm | Total width: 610 mm | Total length: 820 mm | Technical documentation: drawing,certificate of inspection | Manhole: in the upper bottom (Ø 400) | Technical equipment: bu...

5500 Liter 8 bar pressure tank, Aisi 304

remarks: 1 manhole approx. 320 x 420 mm in the front bottom (one tank is missing a manhole cover); tanks were attached as chamber tanks to other tanks - they would have to be supported accordingly on site for ins...

1000 Liter IBC Container, Aisi 304

• Manufacturer: Stöcklin

remarks: Frame, Fe (galvanized); slight differences in design possible; Ball valve made of brass (nickel-plated);

1000 liter oval tank, Aisi 316

remarks: Height-adjustable screws of the feet incomplete or no longer exists (this would have to be compensated accordingly on site for installation); not every tank may have a spray ball

900 liter oval tank, Aisi 316

remarks: Height-adjustable screws of the feet incomplete (this would have to be compensated accordingly on site for installation); Not every tank may have a spray ball

13650 liter heat-/coolable cubic storage tank, Aisi 304 with 3 internal cooling plates

remarks: 3 cooling plates inside the tank (1 x loose, see photos); 1 manhole approx. 300 x 400 mm in the front bottom; smaller dents in the upper bottom material temperatur control system: AISI 304 (V2A) 1.4301

12280 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom; slight differences in foot length (take into account during installation) material temperatur control system: AISI 30...

11320 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; smaller dents in the upper bottom; 1 side wall slightly pushed inwards material temperatur control system: AISI 304 (...