Used applicators in Hamburg, Germany

100 liter IBC container, Aisi 304

• Manufacturer: UCON

Volume: 100 liter | Total height: 570 mm | Total width: 610 mm | Total length: 820 mm | Technical documentation: drawing,certificate of inspection | Manhole: in the upper bottom (Ø 400) | Technical equipment: bu...

1992 Valtorta VF/PF3 100025

• Manufacturer: Valtorta

Workpiece width min-max mm: 1300 | Workpiece height min- max mm: 3 - 100 | Working height: 900 | Uv paint roller: Yes | Application roller width: 1360

1990 Hymmen TLX 100006

• Manufacturer: Hymmen
• Model: TLX

Workpiece width min-max mm: 1350 | Working width max mm: 1350 | Use page: right | Working height: 980 | Uv paint roller: Yes | Chrome-plated dosing roller mm: Yes | Smoothing roller speed approx. m / min.: 80 | ...

5500 Liter 8 bar pressure tank, Aisi 304

remarks: 1 manhole approx. 320 x 420 mm in the front bottom (one tank is missing a manhole cover); tanks were attached as chamber tanks to other tanks - they would have to be supported accordingly on site for ins...

1000 Liter IBC Container, Aisi 304

• Manufacturer: Stöcklin

remarks: Frame, Fe (galvanized); slight differences in design possible; Ball valve made of brass (nickel-plated);

1000 liter oval tank, Aisi 316

remarks: Height-adjustable screws of the feet incomplete or no longer exists (this would have to be compensated accordingly on site for installation); not every tank may have a spray ball

900 liter oval tank, Aisi 316

remarks: Height-adjustable screws of the feet incomplete (this would have to be compensated accordingly on site for installation); Not every tank may have a spray ball

13650 liter heat-/coolable cubic storage tank, Aisi 304 with 3 internal cooling plates

remarks: 3 cooling plates inside the tank (1 x loose, see photos); 1 manhole approx. 300 x 400 mm in the front bottom; smaller dents in the upper bottom material temperatur control system: AISI 304 (V2A) 1.4301

12280 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom; slight differences in foot length (take into account during installation) material temperatur control system: AISI 30...

11320 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; smaller dents in the upper bottom; 1 side wall slightly pushed inwards material temperatur control system: AISI 304 (...

10460 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom; smaller dents in the upper bottom; smaller dents in the upper bottom; feet partially supported with stainless steel p...

1000 liter storage tank, Aisi 304

remarks: Manhole diameter: approx 395mm; partially defective disc valves; partial dents on some containers

400 liter conical tank, Aisi 316

remarks: Cone height appr. 400 mm; 3-legged frame, Aisi 304; 3 short pipes inside the tank

1025 liter container, Aisi 304

• Manufacturer: Azzini

remarks: Frame made of Fe (galvanized); 1 dent in the cylinder; smaller dents in the lower bottom; suspension of the manhole cover incomplete; the clamping ring of the manhole cover is missing (1 matching brand-n...

7000 liter tank, Aisi 304

remarks: 2 rectangular openings appr. 680 x 1190 mm in the upper bottom; feet former with height-afdjustable screw (no longer available)