Used Machine Tools in Texas, USA

Trusted Seller
Auction
Delta Trol LA Filtrate Reducer 55 gal Drums Qty 80
- Manufacturer: Delta
Flashpoint: >94°C (>201.2°F); Relative Density: 0.97 a 1.03; Kinematic Viscosity 40 degrees C: >20.5 cSt; Flow Point (Closed Cup): 94°C (201.2°F). Stock located at Calle Mza 65 Parque Industrial Neuquen/Argentina.
Houston, TX
Visit Auction Website
2023 IMT A250
- Manufacturer: IMT
- Model: A250
Like new, IMT A250 ready for work. The machine was designed for very arduous applications as, thanks to its high torque and high-performing winch, it is capable of reaching great depths, also with great diameters...
$1,260,000 USD
Texas, USA
SMW BB N 500-230-3 STANDARD STANDAR STROKE AIR CHUCK
- Manufacturer: SMW
position to assure it holds pressure. for a front mounted chuck or stand-off brackets for a rear mounted chuck. We also supply adapter plates and can do the complete installation if required. SMW BB N 500-230-3 ...
Houston, TX
SCHUNK ROTA TB 500-230 LH EXTENDED STROKE AIR CHUCK
- Manufacturer: Schunk
position to assure it holds pressure. for a front mounted chuck or stand-off brackets for a rear mounted chuck. We also supply adapter plates and can do the complete installation if required. SCHUNK ROTA TB 500-...
Houston, TX
SCHUNK TB 500-205 LH EXTENDED STROKE AIR CHUCK
- Manufacturer: Schunk
Factory List Price $ 46,361. USD Schunk part number: 0818015 | Chuck diameter: 500 mm (19.68”) | Thru hole: 205 mm (8.07 ”) | Spindle nose: flat back | Stroke per jaw: 0.66” rapid, 0.33” clamping | Total stroke p...
Houston, TX
SMW 850-410 STANDARD STROKE PNEUMATIC SELF CONTAINED POWER CHUCK
- Manufacturer: SMW
Other items required. Adapter plate (all air chucks are flat back), DRMB-distributor ring mounting bracket, air solenoid package (air solenoid, (air pressure regulator, oiler, air filter assembly) integration wi...
$49,500 USD
Get financing
Est. $932/mo
Houston, TX
KITAGAWA UPR450U EXTENDED STROKE AIR CHUCK
- Manufacturer: Kitagawa
Clamping stroke per jaw 0.55”, 14mm This chuck was on short term loan until a special-order chuck arrived. KITAGAWA UPR450U EXTENDED STROKE AIR CHUCK
Houston, TX
SEOAM 40” 3-JAW HYDRAULIC CHUCK
- Manufacturer: SEOAM
SEOAM 40” 3-JAW HYDRAULIC CHUCK Spindle nose: Flat back | Jaw stroke: 30 mm, | Plunger stroke: 57 mm | Maximum gripping diameter: 1000 mm | Minimum gripping diameter: 330 mm | Maximum input force: 161 KN, (16450 ...
$18,000 USD
Get financing
Est. $354/mo
Houston, TX
SCHUNK ROTA-S PLUS MANUAL 3-JAW CHUCK
- Manufacturer: Schunk
SCHUNK ROTA-S PLUS MANUAL 3-JAW CHUCK (Quick change jaw system)
$11,500 USD
Get financing
Est. $226/mo
Houston, TX
Autoblok 3 Jaw Hydraulic Chuck
- Manufacturer: Autoblok
Model 315 GHN Chuck O.D. 12" Chuck I.D. 3.75" Chuck Mount A-11 (7.75" back taper bore) Master Jaws Fine Serrations
$2,250 USD
Houston, TX
ROHM STANDARD STROKE AIR CHUCK
- Manufacturer: Röhm
We reassembled the chuck with NEW O-rings and any other parts required and checked the chuck under pressure in the open and closed position overnight to make sure it was holding air.
$6,500 USD
Get financing
Est. $128/mo
Houston, TX
SMW BB400-140SS
- Manufacturer: SMW
Air Distributor Ring A11 Adapter plate O.d.: 16” | I.d: 5.5” | Max rpm: 1600 | Jaw stroke: .27” | Weight: 340lbs
$7,500 USD
Get financing
Est. $147/mo
Houston, TX
Trusted Seller
BLACKMER PUMPS CO.-Gear Pump
- Manufacturer: BLACKMER PUMPS CO.
BLACKMER PUMP CO. Gear Drive WESTINGHOUSE AC MOTOR WESTINGHOUSE LIFE-LINE T CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. Shipping ...
Houston, TX
Trusted Seller
BLACKMER PUMPS CO.-Gear Pump
- Manufacturer: BLACKMER PUMPS CO.
BLACKMER PUMP CO. Drive BLACKMERE PUMPS CO. AC MOTOR GENERAL ELECTRIC CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. Shipping dates ...
Houston, TX
Trusted Seller
GENQUIP Dock Plate
- Manufacturer: GENQUIP
GENQUIP Dimensions 9'7" X 4'10" CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. Shipping dates are only approximate and contingent up...
Houston, TX
Mazak VTC 250D/50 Machining Center
- Manufacturer: Mazak
- Model: VTC 250D/50
Good condition Mazak VTC 250D/50 Machining Centers manufactured in 2012. Located in USA and other countries. Click request price for more information.
USA