Burkert Type 6650 - 2/2-way flipper solenoid valve with media separation
- Manufacturer: Bürkert
With a width of only 4.5mm, Type 6650 sets a new standard in medium isolation miniature solenoid valves. The optimized design enables reproducible and precise dosing, good rinsing capability and is suitable for t...
Huntersville, NC
Burkert Type 6757 - 2/2 or 3/2-way Whisper Valve with media separation
- Manufacturer: Bürkert
The combination of maximum flow and minimum valve size is becoming increasingly important in various medical and IVD related applications. Combined with high chemical resistance, this explains the broad range of ...
Huntersville, NC
Burkert Type 6227 - Servo assisted 2/2-way Modular Water Valve System
- Manufacturer: Bürkert
The servo-assisted solenoid valve with servo diaphragm is normally closed (NC). In this condition, pressure builds up above the diaphragm - the valve holds tight. When energized, the space above the servo diaphra...
Huntersville, NC
Burkert Type 6724 - 2/2 or 3/2-way Whisper Valve with media separation
- Manufacturer: Bürkert
Many fluidic processes moving closer to where they are actually required. In the field of medical devices, for example, treatments such as dialysis can be provided to patients in convenient surroundings at home. ...
Huntersville, NC
Burkert Type 0330 - Direct-acting 2/2 or 3/2-way pivoted armature valve
- Manufacturer: Bürkert
The 0330 valve is a direct-acting, media-separated pivoted armature valve. It is available as a 2/2 and 3/2-way variant. As a 3/2-way variant, it can be used as a distributor or mixing valve. Various diaphragm ma...
Huntersville, NC
Burkert Type 6126 - 2/2 or 3/2 way Rocker-Solenoid Valve with separating diaphragm
- Manufacturer: Bürkert
The direct-acting rocker solenoid valve, Type 6126, is suitable for general applications in which compressed air, gases or slightly contaminated liquids are to be switched. The medium is in contact exclusively wi...
Huntersville, NC
Burkert Type 0121 - Direct-acting 2/2 or 3/2-way pivoted armature valve
- Manufacturer: Bürkert
The 0121 valve is a direct-acting, media separated pivoted armature valve. It is available as a 2/2 and 3/2-way variant. As a 3/2-way variant, it can be used as a distributor or mixing valve. Various diaphragm ma...
Huntersville, NC
Burkert Type 0331 - Direct-acting 2/2 or 3/2-way pivoted armature valve
- Manufacturer: Bürkert
The 0331 valve is a direct-acting, media-separated pivoted armature valve. It is available as a 2/2 and 3/2-way variant. As a 3/2-way variant, it can be used as a distributor or mixing valve. Various diaphragm ma...
Huntersville, NC
Burkert Type 0131 - Direct-acting 2/2-way or 3/2-way toggle valve
- Manufacturer: Bürkert
The 0131 valve is a direct-acting toggle valve. A variety of seal material combinations are available depending on the application. Thanks to the diaphragm separation between actuator and valve body, aggressive m...
Huntersville, NC
Burkert Type 0127 - 2/2-way or 3/2-way rocker solenoid valve with separating diaphragm
- Manufacturer: Bürkert
Bürkert’s unique Type 0127 solenoid valve is pre-destined for use in laboratory, medical and analytical technology as the pioneer of small media-separated valves. It continues to set the pace today with its rocke...
Huntersville, NC
Burkert Type 6106 - 2/2 or 3/2 way Pneumatic-Rocker-Solenoid Valve
- Manufacturer: Bürkert
The direct-acting rocker solenoid valve type 6106 is designed for use on neutral gaseous mediums. The heat input in the medium is minimal, because the housing is separated from the coil by a stainless steel plate...
Huntersville, NC
Burkert Type 6628 - 2/2 or 3/2-way TwinPower rocker solenoid valve with separating diaphragm
- Manufacturer: Bürkert
Direct-acting, media-separated 2/2 or 3/2-way rocker solenoid valve for the control of aggressive liquids and gases in medical analysis technology, the food industry and the chemical industry during dosing, filli...
Huntersville, NC
Burkert Type TRG001 - Flow restrictor, flow restrictor silencer, control valve, double-check valve, quick bleed valve
- Manufacturer: Bürkert
Controllable valves for compressed air control For regulating the compressed air supply to consumers
Huntersville, NC
Burkert Type 8644 - AirLINE SP electropneumatic automation system
- Manufacturer: Bürkert
The AirLINE system represents a universal interface between process and system control. It integrates electric and pneumatic building blocks into an assembly, enabling a modular and flexible structure of fieldbus...
Huntersville, NC
Burkert Type 8647 - AirLINE SP – electropneumatic automation system
- Manufacturer: Bürkert
The pneumatic valve island Type 8647 AirLINE SP is a modular, electropneumatic automation system consisting of connection and valve modules. It has been especially developed for safe and complete integration into...
Huntersville, NC
Tip: Enter manufacturer, model or keyword