Used Bürkert Valves

Burkert Type TFU002 - Check valve for water and air
- Manufacturer: Bürkert
Check valve for horizontal or vertical installation. Brass or stainless steel housing Inner parts in stainless steel
Huntersville, NC
Burkert Type 0293 - Direct-acting 2/2-way plunger valve
- Manufacturer: Bürkert
Type 0293 switches without pressure difference from zero bar. The valve is especially good for switching low-pressure combustible gases.The direct-acting solenoid valve is delivered with circuit function A. It is...
Huntersville, NC
Burkert Type 6026 - Plunger valve, 2/2-way, direct-acting
- Manufacturer: Bürkert
The valve 6026 is a direct-acting, media-separated 2/2-way plunger valve. The thermal and hermetic isolation of the coil and body by means of stainless steel bellows allows both extreme medium temperatures as wel...
Huntersville, NC
Burkert Type 6281 - Servo-assisted 2/2-way diaphragm valve
- Manufacturer: Bürkert
Valve 6281 is a servo-assisted diaphragm valve. A minimum differential pressure is always required for the valve to function. Various diaphragm materials and circuit functions are available depending on the actua...
Huntersville, NC
Burkert Type 0256 - Direct-acting 2/2-way solenoid valve
- Manufacturer: Bürkert
This direct-acting plunger solenoid valve Type 0256 can be used in many ways. It is delivered with brass or stainless steel bodies for a wide range of orifices and connections. Block screwed coil system Up to DN ...
Huntersville, NC
Burkert Type 6027 - Direct-acting 2/2-way plunger valve
- Manufacturer: Bürkert
Valve 6027 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on...
Huntersville, NC
Burkert Type 6712 - 2/2-way Whisper Valve with media separation
- Manufacturer: Bürkert
Fluidic “point-of-care” applications, such as dialysis or artificial respiration, and “point-of-use” applications, such as at pipetting arms in biological analysis, present special requirements. The media-separat...
Huntersville, NC
Burkert Type 6221 - Piston valve 2/2 way servo-assisted
- Manufacturer: Bürkert
Solenoid Valve for high pulsed and compressed air. A minimal pressure differential of 1bar is required for complete opening. Push-over solenoid system AC19 Compact design, up to DN 20 Body in brass
Huntersville, NC
Burkert Type 0311 - Direct-acting 3/2-way plunger valve
- Manufacturer: Bürkert
Vibration-resistant block-screwed coil design Compact design Housing made of brass and stainless steel with threaded connection
Huntersville, NC
Burkert Type 0211 - Direct-acting 2/2-way plunger valve
- Manufacturer: Bürkert
Vibration-resistant block-screwed coil design Compact design, up to DN 6 Housing made of brass and stainless steel with threaded connection
Huntersville, NC
Burkert Type MKRS - Redundancy valve block for safety-related shut-off function
- Manufacturer: Bürkert
The Type MKRS extends the versatility of valve island Type 8640 as well as the automation system Type 8644. Combining Type MKRS with valve Types 6524 and 6525, redundancy valve functions can be installed. Thereby...
Huntersville, NC
Burkert Type 0303 - Direct-acting 3/2-way plunger valve
- Manufacturer: Bürkert
Vibration-resistant block-screwed coil design Small compact design, process connections on one level Housing made of brass and stainless steel with threaded connection
Huntersville, NC
Burkert Type 0400 - Piston valve 2/2-way servo-assisted
- Manufacturer: Bürkert
Vibration-resistant coil design, operating principle NO (release outwards) Compact design, up to DN 12/16 bar Body in brass
Huntersville, NC
Burkert Type 0117 - 2/2 way plunger solenoid valve with separating diaphragm
- Manufacturer: Bürkert
Type 117 is a normally-closed direct-actingplunger-type solenoid valve with PTFE-coated diaphragm. The diaphragm isolates the fluidfrom the solenoid system. When deenergized (in circuit function A)the valve is cl...
Huntersville, NC
Burkert Type 5407 - Direct-acting 2/2-way lifting armature valve
- Manufacturer: Bürkert
Push-over solenoid system NC valves, certified in accordance with DIN EN ISO 23553-1 Return valve for liquid fuels IP 65
Huntersville, NC