Used Heat Exchangers in Utrecht, Netherlands

Het Stempel BV N.N.

• Manufacturer: Het Stempel BV

Tubular heat exchanger, sanitary (THE). Monotube, 1 compartment, Straight design, 8 tubes, 1 section. Length inner tube: 302 cm, length outer tube: 288 cm. Outer diameter 76 mm, inner diameter: 48 mm. Connection:...

2003 GEA Ecoflex GmbH VT40 BC-6

• Manufacturer: GEA

Milk pasteurizer unit, with Plate heat exchanger (PHE). Max pressure: 8 bar - max temperature: 130 °C. Beam length: 254 cm, connections: 10 x 2.5" Tryclamp. Current configuration 4 Sections: regeneration (2x), he...

1988 Stork Sterideal

• Manufacturer: Stork
• Model: STERIDEAL

Stork Sterideal. UHT line, consists of Stork UHT, Tubular indirect heating, 4 sections of triple tube (tube in tube in tube), Stork holding tube and Skid with infeed tank. new Tubular heatexchanger in 2012 only u...

N.N.. SS Heater

• Manufacturer: N.N..

Water heater, Insulated rectangular tank with spiral. Used as heater of water by circulation under pressure hotwater through a spiral and circulation of (sanitary) water without pressure for usage for in the fact...

1998 Baelz 106-42-45-FN-B1

• Manufacturer: Baelz

Tubular Heatexchanger Steam/Water. Multitube. Spiral design. 1 Tube. 1 Section. Length: 0,95 mtr. Outer diameter 280 mm. 42x tubes of 8 mm inner diameter. Steam section: 18 bar, 250 °C, 14 ltr. Water section: 10 ...

N.N. SS insulated lab holding

• Manufacturer: N.N..

Laboratory insulated mobile holding with 3 loops. A.) 1.66 l - 1 min. 100 l/h. B.) 3.32 ltr - 2 min - 100 l/h. C.) 3.23 ltr - 2 min - 100 l/h. Connections: 2 x 1" Din - 2 x 15 mm Din. Total dimensions: 80x43x105 ...

N.N.. SS

• Manufacturer: N.N..

Double jacketed pin mixer. Shaft diameter 85 mm, 3 rows with 14 pins (42 pieces total) - cylinder diameter 250 mm with 2 rows with 19 and 20 (total 39) pieces. Cylinder length 195 cm. Connections: 2 x 2" Din and ...

Tubular Heatexchanger

Monotube, inner diameter (product) 23mm outer diameter (water) 40mm, 42 tubes x 3 mtr each. total dimensions: Length 3.00 mtr x Width 1.30 m, Height 1.50 mtr. On a stainless steel frame. Flexible in using, many l...

1972 Paasch & Silkeborg H-3575

• Manufacturer: Paasch & Silkeborg

Tubular Heatexchanger 36 tubes, total dimensions: L 320cm X W 80cm X H 140cm

2006 Alfa Laval C10-SR

• Manufacturer: Alfa-Laval

Design pressure: 10.0 bar, design temperature: -10 / 110 ° C, test pressure (Gauge): 13.0 bar

2008 Tetra Pak MS10-SR

• Manufacturer: Tetra Pak
• Model: MS10SR

Pressure: 10 bar / Beam length: 1000 mm, connections: 97 mm / 4 "SMS Currenct configuration: 1 Section: 44 plates - Connections head: 2 up, follower 2 down Total dimensions: lxwxh: 125 cm x 67 cm x 130 cm.

2009 Tetra Pak Hot water set / MT-108

• Manufacturer: Tetra Pak

Hotwater set with tubular heat exchanger, steam valve (Samson) and piping. Pressure: shell 0-15 bar, tubes 0-40 bar. Temperature: shell 0-180 °C, tubes 0-180 °C. Volume: shell 9,3 liter, tubes 6,1 liter.

N.N. Tubular heatexchanger

• Manufacturer: N.N.

Non sanitary tubular heat exchanger for hot water preparation with steam. Multitube. 1 Compartment. Straight design. Length: 2,1 mtr. Outsie diameter 75 mm. Inside diameter: 7 tubes of 16 mm inner diameter. Conne...

Alfa Laval M10

• Manufacturer: Alfa-Laval
• Model: M10

Current configuration: 1 Section. Connections: head: 2 up and 2 down, follower 0.

1995 Alfa Laval CLIP10-RM

• Manufacturer: Alfa-Laval

Pressure: 10 bar. Current configuration: 1 Section. Connections: head: 2 up, follower 2 up.