Used Heat Exchangers in Utrecht, Netherlands

1993 Alfa Laval CLIP 8-RM

• Manufacturer: Alfa-Laval
• Model: CLIP 8-RM

Plate heat exchanger, sanitary (PHE). Pressure: 10,0 bar. Beam length: 180 cm. Connections: 2x 2" Din and 10x 3" SMS. Current configuration: 4 Sections: 17-18-18-24 plates, in total 77 plates. Connections head: 2...

2013 Alfa Laval Front 8 RM

• Manufacturer: Alfa-Laval

Plate heat exchanger, sanitary (PHE). Pressure: 10,0 bar - beam length: 180 cm, connections: 8 x 3" Din. Currenct configuration: 3 Sections: 37-48-36 plates (total 121 plates) - Connections head: 2 up and 2 down,...

Crepaco 1VT422

• Manufacturer: Crepaco

Scraped surface heat exchanger (SSHE). 1 Vertical Product cylinder, tube: Ø 96 mm, length 1,500 mm, rotor Ø 38 mm with 2 scrapers. Cylinder material: stainless steel. Surface per tube 0,19 m² and volume per tube ...

Het Stempel BV N.N.

• Manufacturer: Het Stempel BV

Tubular heat exchanger, sanitary (THE). Monotube, 1 compartment, Straight design, 8 tubes, 1 section. Length inner tube: 302 cm, length outer tube: 288 cm. Outer diameter 76 mm, inner diameter: 48 mm. Connection:...

2003 GEA Ecoflex GmbH VT40 BC-6

• Manufacturer: GEA

Milk pasteurizer unit, with Plate heat exchanger (PHE). Max pressure: 8 bar - max temperature: 130 °C. Beam length: 254 cm, connections: 10 x 2.5" Tryclamp. Current configuration 4 Sections: regeneration (2x), he...

1988 Stork Sterideal

• Manufacturer: Stork
• Model: STERIDEAL

Stork Sterideal. UHT line, consists of Stork UHT, Tubular indirect heating, 4 sections of triple tube (tube in tube in tube), Stork holding tube and Skid with infeed tank. new Tubular heatexchanger in 2012 only u...

2000 GEA Ahlborn VT40 BC-16

• Manufacturer: GEA
• Model: VT40 BC-16

Plate heat exchanger, sanitary (PHE). Max working pressure: 10 bar - Max working temperature: 100 °C. Beam length: 194 cm, connections: 4x DN100 Din - 2 x DN65 Din. Current configuration: 2 Sections: 73-87 plates...

1995 Alfa Laval Clip 10

• Manufacturer: Alfa-Laval
• Model: CLIP 10

Milk thermiser/pasteuriser for Full fatt milk, full automatic. Exisiting out of: Centrifugal pump feed pump to the pasteuriser, inlet filter, Balance tank with 3 level sensors, spraybowl for cip, 3 level sensor. ...

Tetra Pak Spiraflow

• Manufacturer: Tetra Pak
• Model: SPIRAFLOW

Double jacketed and insulated tubular tube heat exchanger. Set of 5 tubes. Multitube, scheme: 2 x 2 in parallel and 1 in serial. Effective length 6mtr. 4 Tubes outer diameter 105 mm and 1 outer diameter 115 mm. 4...

2005 Sacome TFMI

• Manufacturer: Sacome

Skid mounted tubular heat exchanger set assembled by Het Stempel. Unit exist of: #01: (Multitube, type: 1x1-TFMI-370-1-6 1/2''/19-6000-316L/2205-HARD, year: 2005, 37 tubes in 1 tube. Length 6 meter. Product side:...

N.N. SS insulated lab holding

• Manufacturer: N.N..

Laboratory insulated mobile holding with 3 loops. A.) 1.66 l - 1 min. 100 l/h. B.) 3.32 ltr - 2 min - 100 l/h. C.) 3.23 ltr - 2 min - 100 l/h. Connections: 2 x 1" Din - 2 x 15 mm Din. Total dimensions: 80x43x105 ...

N.N.. SS

• Manufacturer: N.N..

Double jacketed pin mixer. Shaft diameter 85 mm, 3 rows with 14 pins (42 pieces total) - cylinder diameter 250 mm with 2 rows with 19 and 20 (total 39) pieces. Cylinder length 195 cm. Connections: 2 x 2" Din and ...

Tubular Heatexchanger

Monotube, inner diameter (product) 23mm outer diameter (water) 40mm, 42 tubes x 3 mtr each. total dimensions: Length 3.00 mtr x Width 1.30 m, Height 1.50 mtr. On a stainless steel frame. Flexible in using, many l...

1972 Paasch & Silkeborg H-3575

• Manufacturer: Paasch & Silkeborg

Tubular Heatexchanger 36 tubes, total dimensions: L 320cm X W 80cm X H 140cm

2006 Alfa Laval C10-SR

• Manufacturer: Alfa-Laval

Design pressure: 10.0 bar, design temperature: -10 / 110 ° C, test pressure (Gauge): 13.0 bar