Used Sheet Metal Processing in Switzerland

SCHULER S2-160-1.25-30-160 49505

• Manufacturer: Schuler

Object: 49505 | Drive system: eccentric / crank | Openings in uprights: yes | Number of slide actions: 1 | Total force (nominal): 160 to | Table surface (left-right): 1130 mm | Table surface (front-back): 1000...

SCHULER PH 200/1 48524

• Manufacturer: Schuler

Object: 48524 | Drive system: hydraulic | Openings in uprights: no | Number of slide actions: 1 | Table cushion: yes | Total force (nominal): 200 to | Table surface (left-right): 1000 mm | Distance table - sli...

1972 KAISER 60 P 42789

• Manufacturer: Kaiser

Object: 42789 | Total force (nominal): 60 to | Slide adjustment: 70 mm | Stroke min.: 11 mm | Stroke max.: 60 mm | Variable speed: yes | Stroke rate (min.): 60 /min | Stroke rate (max.): 240 /min | Strip f...

2005 ARKU RM 50X/9 ECOPLAN 46236

• Manufacturer: Arku

Cut-To-Length line consisting of: - Coil loading chair HUBTEX - ARKU single-sided decoiler - ARKU VRM 5050/9 feed straightening machine, +- 0.1 mm feeding precision - measuring wheel to verify feed length - Cut-t...

1999 KOHLER 50.140/21-3000.1VSRM + HK 46805

• Manufacturer: Kohler

KOHLER coil line consisting of: - Coil loading chair CS3000 - Decoiler 300.1 H - VSRM 50.140/21 leveller - HK 140 upright leveller

2021 SACFORM RMS11-604 42826

• Manufacturer: SACFORM

Object: 42826 | Controls: SCHNEIDER | Sheet width max.: 600 mm | Sheet thickness max.: 4 mm | Feed velocity max.: 32 m/min | Feedstock transport direction: left to right | Sheet width (min): 60 mm | Sheet th...

STRIP STRAIGHTENING MACHINE “HFA” TYPE JMS-100

SKU: 2200038

2002 MIOS T20 FV 53991

• Manufacturer: Mios

Object: 53991 | Spigot hole diameter: 30 mm | Stroke rate (max.): 155 /min | Stroke min.: 5 mm | Stroke max.: 60 mm | Shut height (stroke down, adjustment up), bdc: 280 mm | Throat (c-frame): 180 mm | Tota...

2000 PRESSIX 100 CNR 4 51223

• Manufacturer: Pressix

Located in Barcelona - Spain 2 identical units available

1978 FEINTOOL GKP F 250 48186

• Manufacturer: FEINTOOL

Located in Barcelona - Spain Installation space of the tools Front passage between the columns: Movable: 560 mm Fixed: 560 mm Side passage between the columns: Movable: 270 mm Fixed: 270 mm Tool height: Movable: ...

2002 FEINTOOL HFA 8800 PLUS 36813

• Manufacturer: FEINTOOL

Object: 36813 | Total force (nominal): 880 to | Stroke: 40 mm | Cutting velocity min.: 5 mm/s | Cutting velocity max.: 70 mm/s | Closing velocity: 200 mm/s | Returning velocity: 200 mm/s | Nominal force: 6...

1981 FEINTOOL GKP F 40 32359

• Manufacturer: FEINTOOL

Object: 32359 | Drive system: knuckle-joint | Frame design: H-frame, monoblock | Total force (nominal): 40 to | Stroke: 45 mm | Stroke rate (max.): 90 /min | Lower table (left-right): 280 mm | Lower table (f...

1971 FEINTOOL GKP F 50/80 36213

• Manufacturer: FEINTOOL

Example of an overhauled Feintool GKP 50/80 which can be applied to a machine we have in stock

1972 FEINTOOL GKP F 100/160 49648

• Manufacturer: FEINTOOL

Object: 49648 | Drive system: knuckle-joint | Frame design: H-frame, monoblock | Total force (nominal): 160 to | Stroke: 13 mm | Stroke rate (max.): 72 /min | Nominal force: 50 to | Lower table (left-right):...

1996 IMS 80 RE 53951

• Manufacturer: IMS

Object: 53951 | Drive system: eccentric / crank | Total force (nominal): 80 to | Table surface (left-right): 560 mm | Table surface (front-back): 376 mm | Spigot hole diameter: 50 mm | Stroke: 110 mm | Stro...