- Trusted Seller
2020 IMC Calender Machine
used
- Manufacturer: IMC
2020 IMC Calendering Machine is a precision roller pressing system designed for research and pilot-scale electrode manufacturing, offering controlled compression processing for battery materials up to 300mm web w...
- Trusted Seller
A&B Processing Systems Receiver Tank
used
- Manufacturer: A&B
- Model: RECEIVER TANK
A & B Processing Systems Receiver Tank. 500 Liter capacity. 316 stainless steel construction, approximately 34.5″ diameter x 38″ straight side, dished removable top, cone bottom, rated 44 psi and full vacuum @ 36...
Skokie, IL - Trusted Seller
A&B Processing Systems Receiver Tank
used
- Manufacturer: A&B
- Model: RECEIVER TANK
A & B Processing Systems Receiver Tank. 500 Liter capacity. 316 stainless steel construction, approximately 34.5″ diameter x 38″ straight side, dished removable top, cone bottom, rated 44 psi and full vacuum @ 36...
Skokie, IL - Trusted Seller
A&B Processing Systems Receiver Tank
used
- Manufacturer: A&B
- Model: RECEIVER TANK
A & B Processing Systems Receiver Tank. 500 Liter capacity. 316 stainless steel construction, approximately 34.5″ diameter x 38″ straight side, dished removable top, cone bottom, rated 44 psi and full vacuum @ 36...
Skokie, IL - Trusted Seller
A&B Processing Systems Receiver Tank
used
- Manufacturer: A&B
- Model: RECEIVER TANK
A & B Processing Systems Receiver Tank. 500 Liter capacity. 316 stainless steel construction, approximately 34.5″ diameter x 38″ straight side, dished removable top, cone bottom, rated 44 psi and full vacuum @ 36...
Skokie, IL - Trusted Seller
A&B Processing Systems Receiver Tank
used
- Manufacturer: A&B
- Model: RECEIVER TANK
A & B Processing Systems Receiver Tank. 500 Liter capacity. 316 stainless steel construction, approximately 34.5″ diameter x 38″ straight side, dished removable top, cone bottom, rated 44 psi and full vacuum @ 36...
Skokie, IL - Trusted Seller
PDC International Corp 50-E
used
- Manufacturer: PDC
Equipment Overview The PDC 50‑E is a stainless-frame tamper-evident neck banding machine for shrink sleeve application at speeds up to 130 containers per minute. It features a timing-screw infeed system, motorize...
- Trusted Seller
2017 HopsHarvester Hopster 5P
used
- Manufacturer: HopsHarvester
Equipment Overview This 2017 Hopster 5P is a trailer-mounted, PTO-driven hop harvester with only ~40 hours total use, confirmed by seller. Offered with operational video and main conveyor, the unit is ready for f...
- Trusted Seller
2020 Meyer #CI3 Optical Color Sorter
used
- Manufacturer: Meyer
~ 12,500 Hours Machine type: Process Equipment | Machine location: Upon Request | Stock #: 933182 | Prior use: Hazelnut Kernels
- Trusted Seller
2023 MMLJ DB800XL
used
- Manufacturer: MMLJ
300 CFM Compressor 9,100 lb Fully Loaded Weight (estimated) DB800® Blast Pot 90 min Continuous Blast Time Abrasive Capacity 300 lbs Nozzle SLV #6
- Trusted Seller
2019 Hennecke MicroLine 45 R/MT
used
- Manufacturer: Micro Line
1 metering unit for Polyol with an HP 2 metering pump, max. nominal output approx. 54 cm3 /sec at 2.6 kW/1800 min-1 1 metering unit for Isocyanate with an HP 2 metering pump, max. nominal output approx. 54 cm3 /s...
- Trusted Seller
Water Maze HBG-30D
used
- Manufacturer: Water Maze
Foam lance holder set Water Maze Power supply (Ph/V/Hz) 1 / 120 / 60 Amps (A) 3 Flow Rate (gal/h) max. 24 BTU 311000 Container capacity (gal) 100 Exhaust Stack diameter (in) 10 Weight without accessories (lb) 13...
- Trusted Seller
Kirby RMT D
used
- Manufacturer: Kirby
1800-2200 Stalks Per Minute Working width 3,85 m Conveyance width 2,50 m Total weight 850 kg PTO speed 540 rpm Needed power 50-60 hp Cutting height 3-6 cm Drive Hydraulic **Never Used**
- Trusted Seller
2019 Advantage MDG-5A-PC
used
- Manufacturer: Advantage
Unit Cooling Capacity Compressor Condenser Refrigerant Process Pump Reservoir Process Connections Full Load Amperage(4) Dimensions Weight(5)
- Trusted Seller
Generic Refrigerant Recovery Equipment
used
- Manufacturer: Generic
Low Pressure Cart: Dimensions: 24″ L x 22″ W x 45″ H Connections: 1/2″ MFL Inlet, 1/2″ MFL Outlet High Pressure Cart #1: Dimensions: 24″ L x 22″ W x 45″ H Connections: 1/2 MFL Inlet, 1/2″ MFL Outlet High Pressure...
Shanklin S-24 Shrink Wrapping Machine
used
- Manufacturer: Shanklin
- Model: S-24
Good condition Shanklin S-24 Shrink Wrapping Machines manufactured in 2001. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
