Used compacteren in Belgium

Tour disc grinders 2x 800mm, 2 speeds

With 2 pivoting tables 950x340mm, with graduation from 0 till 45° 2 speeds adjustable by step pully With small inserted exhaust for dust With 13 abrasive papers

Loading band, 4400 mm x 800 mm

External dimensions: length 5000 mm, width 2150 mm, height 2460 mm Useful dimensions: length 4400 mm, depth 800 mm, height 1600 mm With small loading hopper On ffet Gear engine SEW

2018 Pouring ladle ACETARC, with transport foot, ± 1600 kg

External dimensions: length 1600mm, width 1350mm, height 1700mm With useful lining With one long and one small spout With bold-on trunnions With transport foot for lift tracs With heat protection With type plate ...

Silicone moulding press for centrifuge, 2 x 350mm

Brand AB, type: S2000, serial number: TRF2/350 Giri 300-700 Pneumatic press with 2 swivel tables Ø 350 mm For silicone pattern discs For centrifugal casting of small parts like jewellery, figurines, medals, etc.

Screw dosing with a little bunker

Gearbox motor with speed regulation Type G22 G02- 10- VO/ DK 84- 200V 3308, 0,55 kW, 220/380 V, 1420 t/min With small pneumatic vibrating on the cone Screw not closed Speed exit 133 until 19 rpm Continuously

Steep conveyor 30 000 mm, useful width 1150mm

External dimensions: length 32 850 mm, width 1360 mm, height 580 mm Motor: 0,75 kW, 220/380 V, type gear motor, 1,8 rpm at the outlet Feet adjustable in height Roller covered with rubber Transmission from the mot...

Fastloop with vibrating table

Fastloop consisting of: Vibration table: Dimensions: Length: 1000mm; Width: 1000mm; Height: 650mm roller width: 675mm; center distance: 225mm; Ø roller: 90mm With relay control 4 air bars End switch under the tab...

Vibrating cruher for chemicel sand

• Manufacturer: HENSEL

Brand: HENSEL, weight: ± 300 kg 2 motors AEG, type U9X, 0,56 kW, 220/400 V, 1410 rpm Sand passage: 50 mm x 5 mm, exit by the loxer part to 300 mm of the ground, output Ø 190 mm Vibration on frame with silent bloc...

Dosing screw, Ø 45 mm, length 1350 mm

External dimensions: length 1850 mm, width 700 mm, height 1100 mm Engine: 0,75 kW, 220/380 V, type: drive, 1380 rpm With spare hopper, ± 100 l, rectangular Power transmission over V-belt Without control box With ...

Extraction belt 3300/500 mm

External dimensions : Lenght: 3950mm; Width: 1450mm; Hight: 1230mm Useful dimensions: Lenght: 3300mm; Width: 500mm Motor: ML; Type: gear box; 2,2KW; 380V; 1430r/min Op on feets, Ø drumwheels 300mm; Small wheels ...

2000 Mixing plant for core sand LÜBER 7,5t/h

• Manufacturer: Lüber

Complete installation with 2 core sand mixers Mixer capacity / filling volume: Both mixers are mobile With laterally movable weighing hopper With 1 sand silo 6m³ separated in 2 (for old and new sand) With 3 dosin...

Fastloop system not motorized

Consists of : 2 x Roller track length: 6000mm; width: 1060mm; height: 410mm (57 rolls) 1x Roller track length: 4000mm; width: 1060mm; height: 410mm (39 rolls) rollers Ø 90mm, length: 990mm (Installation length: 1...

KUKA robot, CE

• Manufacturer: Kuka
• Model: KR 240

First arm length 1250mm Second arm length 1000mmm With control board With protective grids With roller conveyor With gripper

Semi-automatic moulding line HWS/HSP 1

Serial number: 1190, com. number: 10469 Year of construction: 1995, weight: ± 25000 kg Height 2970 mm Plant equipt by several hydraulic units With rotating table, roller stripping Stroke 200 mm, press stroke 200...

Cut-off machine with 2 parallel disks, Ø 300 mm, HANS BOOST

Type: STA 300/300, serial number: 354 Year of construction: 1974, weight: ± 700 kg Hydraulic tubes Motor H SAFTIG, type AOM132S-2, 7,5 kW, 380 V, 2910 rpm With table length 300 mm, width 200 mm, 2 discs Ø 300 mm ...