Used compacteren in Belgium

Small sandhopper, ± 1 m³

On 4 feet with overpressure valve Weight: ± 400 kg | Outside dimensions: 1530 mm x 1130 mm, h. 3500 mm | Useful dimensions: 1250 mm x 850 mm, 1450 mm | Outlet height above the ground: ± 1900 mm

Small vibrating dose conveyor

• Manufacturer: Kleine

Magnet vibrator Weight: ± 300 kg | Outside dimensions: 2.600 mm x 630mm, h. 650mm | Inside dimensions: ± 2300mm x 200mm, h. 60mm | Motor sinex, serial number: 28463A3, 220/380 V

Small grinding table with exhauster

Useful dimensions: width 800 mm, depth: 800 mm Motor 0,25 kW, 220/380 V Grinding table with exhauster, outlet inside 200 mm x 250 mm With grating

Small permanent drum magnet with drive

• Manufacturer: BMD

External dimensions: length 900 mm, width 570 mm, height 1180 mm Engine BAUER: 380 V; 0,5 CV; type: reducer drum speed 175 rpm/min in solid housing drive over 2 V-belts 2 outlets for separating

Small permanent drum magnet with drive

• Manufacturer: BMD

External dimensions: length 800 mm, width 620 mm, height 780 mm Engine OBERMOSER: 380 V; 0,5 CV, type: reducer drum speed ± 170 rpm/min in solid housing drive over chaine 2 outlets for separating

Small rubberbelt conveyor AXMANN, W500mm

• Manufacturer: Axmann

Axdistance 1500 mm, 4 rolls , band on feet With bunker

Small round coating basin ±0,35m³

External dimensions: length: 1500mm; width: 950mm, height: 1530mm Usable dimensions: Ø850mm; depth: 700mm Capacity ±0.35m³ For water sizing With 1 agitator; 0.37 kW With forklift feet and castors

Small sand hopper up foots ±2m²

Dimensions: Length: 1510mm; Width: 1460mm; Height: 2150mm Usable dimension: Length:1250mm; Width: 1250mm; Height: 820/590mm Contenance ± 2m³, outlet without fastener 210×210mm, with grating screen on the top Co...

Sandlabo sand compactability tester GF/PVG

• Manufacturer: GF

Dimensions: Width: 215mm, Depth: 610mm, Height: 530mm with somples sleeve Ø 50mm H120 mm

Small sand hopper with dust cleaner ± 1m³

Without foot and plug Cleaning by vibraiting Filter (collector) DCE Unimaster Type UMA 100V N. 200468

Small hopper with discharging belt EA 1450mm

Motor 2 hp, 220/380 V, 1415 rpm Band width 500 mm 6 rolls width 600 mm Driven by one trapez belt, flat gear

Small casting ladles ROPER, 300 kg

• Manufacturer: Kleine

With oilbath gearbox In good working condition Outside dimensions: length 1100 mm, h. 850 mm | Inside: Ø 450 mm, h. 500 mm

2001 Small round coating basin ±0,35m³

• Manufacturer: Jongia

External dimensions: length: 1050mm; width: 820mm, height: 1520mm Usable dimensions: Ø800mm; depth: 730mm Capacity ±0.35m³ For water sizing With 1 agitator; 0.5 kW With forklift feet and castors

Small generating set BOSCH, petrol

• Manufacturer: Bosch

Type : G4700, serial number : 7790406020 Motor BOSCH, 3,9/3,7 kW, 230/400 V Mounted on a mobile trolley With petrol motor Briggs and Straton

2016 Stainless dosing screw with small hopper

• Manufacturer: Omega

With long cable with agitator and level detector "full"