Used Processing in Illinois, USA

Hosokawa Mikro Pulverizer Model 4SCB – Carbon Steel, 60 HP, Food Application

• Manufacturer: Hosokawa

53264039 Used Hosokawa Mikro Pulverizer Model 4SCB Carbon Steel, 60 HP, Food Application. 20" diameter x 12" wide rotor with 4 rows swinging stirrup hammers. 8" inlet. Driven by a 60 hp, 3/60/550 volt, 1775 rpm...

Turbo Mill Model CMTM-1500 – 200 HP, Clam-Shell Design, Blower, Cyclone, Airlock, VFD Controls (

• Manufacturer: Cable Management

52791017 Turbo Mill Model CMTM-1500 200 HP, Clam-Shell Design, Blower, Cyclone, Airlock, VFD Controls (Used). The CMTM-1500 turbo mill is designed to grind rigid and semi-rigid materials into a fine particle siz...

Paint Media Mill, 8" x 30" Milling Chamber, 6 Gallon, 10 HP Motor

• Manufacturer: UnknownUnknown

50556009 Used Paint Media Mill. includes 8" diameter X 30" high milling chamber, approximate 6 gallon. Stainless Steel screening section, jacketed chamber. Driven by 10 HP, 220/440 V, 1740 RPM, 3-phase, 60 cycle ...

Fitzpatrick Chilsonator Model 16Lx20D with HAS030 Comminutor Mill – Stainless Steel

• Manufacturer: Fitzpatrick

51188005 Used Fitzpatrick Chilsonator Model 16Lx20D with HAS030 Comminutor Mill All stainless-steel wetted parts. The Chilsonator uses dual 16" 20" rolls with controlled hydraulic pressure and feed augers to c...

Triple-Stage Short Path Distillation from SPD Model SPD 25

• Manufacturer: SPD Systems

Triple-stage short path distillation skid from SPD Systems Model SPD 25 with throughput of 25 L/hr. Used for only 600 hours. Comes with the following equipment: - Allen Bradley Industrial PLC’s - Leybold Turbo...

Hosokawa Multiprocessor ZPS Milling System | ACM Mill w/ ATP Classifier & Alpine 100 AFG Jet Mill | Frame Mounted

• Manufacturer: Alpine

53228005 Used Hosokawa Multiprocessor ZPS Milling System. Incl. (1) ACM mill with ATP classifier and (1) Hosokawa/Alpine 100 AFG Counter Jet Mill with 55kW (73-3/4"hp) compressor powered by a 1.0 kW (1.34hp) moto...

Fitzpatrick Chilsonator System with Comminutor Mill & GKM Screener – Complete Dry Granulation Line

• Manufacturer: Fitzpatrick

51188004 Used Fitzpatrick Chilsonator System with Comminutor Mill & GKM Screener Complete Dry Granulation Line. Chilsonator Model 16Lx20D, a Fitzpatrick HAS030 Comminutor Mill, and a GKM Siebtechnik KTS 2600/5DS...

Paul O. Abbe Pebble Mill – Model PMU-6, 112 Gallon Carbon Steel with Urethane Lining

• Manufacturer: Paul O. Abbe

54179001 Used Paul O. Abbe Pebble Mill, Model PMU-6. Carbon steel vessel, 112 gallons (15 cubic feet) total. 1/2" thick urethane mill lining. 31" inner diameter x 35.5" long. Removable head. Serial # 0967-505PM. ...

Fitzpatrick Comminutor FitzMill, Model DASO- 6 – Stainless Steel

• Manufacturer: Fitzpatrick
• Model: DASO-6

53844010 Used Fitzpatrick Comminutor Fitzmill, Model DASO-6, Stainless Steel. (16) 1" wide x 5/16" thick x 3-3/4" long fixed knives. Approximately 6" diameter x 14" long Cutting chamber. Has gravity feed throat w...

Guoxin Machinery FS-800 Universal Pulverizer – 50 HP, 800-2000 kg/h

53553005 Used Guoxin Machinery Universal Pulverizer, Model FS-800. Capacity 800 - 2000 kg/h. Main speed 1800 rpm. Driven by 37kW (50hp) motor. Feed hopper. Mounted on frame. Serial# 191012140.

Kent 9" x 24" Three Roll Mill – Industrial TRM for Fine Grinding & Dispersion

• Manufacturer: Kent

51065020 Used Kent 9" x 24" Small Production Three Roll Mill (TRM). with manual roll set, manual apron set, and manual roll temperature control. Probably driven through a silent chain drive by a 10 HP motor. Does...

Fitzpatrick Chilsonator – Model 4L x 10D, 10" x 4" Stainless Steel Rolls, 50–100 kg/hr Capacity

• Manufacturer: Fitzpatrick
• Model: 4L X 10D

49227002 Used Fitzpatrick Chilsonator Model 4L x 10D, 10" x 4" Stainless Steel Rolls, 50100 kg/hr Capacity. Dependent on density of product and roll pressure and screw speed is 50 to 100 kg/hr. (110 to 220 lbs./...

Munson Machinery Attrition Mill – Model SK-24-SS

• Manufacturer: Munson MachineryMunson Machinery

54139001 Used Munson Machinery Attrition Mill, Model SK-24-SS. 304 Stainless Steel construction. 6" diameter gravity fed inlet, with 3" diameter air inlet control with gate. 6" bottom outlet. Approximately 26" di...

Thermatool Tube Cutting Machine - 2”-4.5” OD, ABB Drives, Scrap Conveyors

• Manufacturer: ABB

51610001 Used Thermatool Tube Cut-Off Machine. OD Range: 2"-4.5", Max Wall Diameter: .235". Max Speed 250 FPM, Hydraulic Accelerator Hydraulic Clutch, Encoder, Two Scrap Goose Neck Conveyors Unico Controller, ABB...

ADM Stainless Steel Separator, Model C.V. | 48" OD, 891 Gallon, Built 2024

• Manufacturer: ADMADM

54197002 Unused ADM Stainless, Type 48" OD C-110 Separator, Model C.V. 891 Gallon. Approximately 48" diameter x 103" straight side. Vertical, 304 stainless steel. Internal rated 600/FV PSIG at -20 to 350 degrees...

Excel PP-48ST Shrink Wrapping Machine

• Manufacturer: Excel
• Model: PP-48ST

Good condition Excel PP-48ST Shrink Wrapping Machines. Located in USA and other countries. Click request price for more information.