Used Processing in New Jersey, USA

Hastelloy - C22 Heinkel HF800 Centrifuge-Inverting Filter - IPP# 203934

• Manufacturer: Heinkel

inverting filter centrifuge Rated 1150 RPM Solid Haynes Hastelloy C22 for all process parts 316SS for balance of exterior parts Clean in place nozzles for solids and filtrate housings Polished to 180 grit and ele...

Mixer-Disperser 14.7 kW (19.7 HP) Stainless Steel 316 - IPP# 212576

• Manufacturer: Fryma

vacuum processing vessel with Homogeniser internal pressure 95% vacuum 500 liter batch 316 stainless steel jacketed vessel top cover with a duplicated slow speed agitator with (2) saw tooth blade impellors (1) ho...

Stainless Steel Austenitic Chema Balke Dürr GmbH Batch-Type Agitated Reactor - IPP# 235800

• Manufacturer: Dürr

1.4529 SS (AL-6XN super-Austenitic SS) fermenter/ reactor with internal cooling coil and sparge ring for gas addition Polished stainless steel interior motor : 3/50/380 volt Bergmann double mechanical seal on sha...

Low Temp Chiller 771,107 kcal/h (255 Ref. Ton) - IPP# 216002

• Manufacturer: Trane

CentraVac Low temperture, Series R chiller Drive motor: 197 kW, rated for 460 volt, 3 ph, 60 Hz Requires 705 lbs Evaporator rated for 40% Glycol at 428 gpm, inlet at 33.8 degrees F, and outlet at 25 degrees F. Co...

Stainless Steel 316 Centrifuge-Lab - IPP# 239309

Centritec Cell 8 single use insert centrifuge This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert. The system offers these advantages Single use, rapid changeover disp...

Cytiva 6098 Column - IPP# 239339

• Manufacturer: Cytiva

2000 Liter/Hr., 316 SS, polished to 180 grit finish, modular chromatography system, manufactured by Cytiva/GE- ATKA system # 6098 6 inlets, 4 outlets, two column connection, five head diagram pumps. Rated for 6 b...

Major Items Plastic Stainless Steel 316 - IPP# 205767

• Manufacturer: Rieter (Maag)

Type: Underwater strand pelletizer the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temp...

Stainless Steel 304 Praj Industries Tray Column - IPP# 235302

• Manufacturer: International Process Plants

process vent scrubbing column Thirty 304L SS sieve trays, spaced at 1' each,

Stainless Steel 317 Andritz SZ400/2 Centrifuge-Pusher - IPP# 232767

• Manufacturer: Andritz

Duplex/317/316 stainless steel two stage pusher continuous centrifugeTwo stage pusher continuous centrifuge 5.5 ton/hour troughput of solids 10/130 degrees C cake thickness of outer basket 40mm (max) inner basket...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221213

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac motor

Centrifuge-Disc Bowl 1.5 kW (2 HP) Stainless Steel 316 - IPP# 99783

• Manufacturer: Disco

laboratory separator disc centrifuge. Speed 3500 - 10000 rpm Throughput 200-600 ltr/hr Openings: liquid/solids outlet 3-1"; feed (process) 1-1/2"; operating liquid 3-1/2"

- IPP# 211968

• Manufacturer: Airoil-Flaregas

Airoil-Flaregas F.C.10 flare tip, Pilots Derrick supported Flare stack, Customer ref #62/3336085/2H1/ON, The FC.10 flare tip inclusive of the Flarex molecular seal, Derrick supported flare stack and Knock out dru...

Major Items Plastic Stainless Steel 316 - IPP# 205765

• Manufacturer: Rieter (Maag)

Type: Underwater strand pelletizer the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temp...

Major Items Plastic Stainless Steel 316 - IPP# 205766

• Manufacturer: Rieter (Maag)

Type: Underwater strand pelletizer cutter the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Me...

IPP# 602139, Urea Prill Fertilizer and Agrochemical

Chemico Design – Conventional 1000 STPD Nameplate CO2 Compression – Centrifugal followed by reciprocating Urea Reactor – Unocal/Stamicarbon conventional design (1992) Urea Concentration – Crystallization, Crystal...