Used Processing in New Jersey, USA

1968 Brighton FDWV-50510-BJD

• Manufacturer: Brighton

Brighton Vertical Dimple Jacketed Reactor Brighton, 1,000 Gallons Capacity, 182 PSI @ 350°F Jacket Pressure, 200/FV @ 350°F Internal Pressure, Top/Center-Mounted Pfaudler Agitator, 316-L Stainless Steel, Mounted ...

Stainless Steel 304 Praj Industries Tray Column - IPP# 235302

• Manufacturer: International Process Plants

process vent scrubbing column Thirty 304L SS sieve trays, spaced at 1' each,

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221213

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac motor

Centrifuge-Disc Bowl 1.5 kW (2 HP) Stainless Steel 316 - IPP# 99783

• Manufacturer: Disco

laboratory separator disc centrifuge. Speed 3500 - 10000 rpm Throughput 200-600 ltr/hr Openings: liquid/solids outlet 3-1"; feed (process) 1-1/2"; operating liquid 3-1/2"

IPP# 602139, Urea Prill Fertilizer and Agrochemical

Chemico Design – Conventional 1000 STPD Nameplate CO2 Compression – Centrifugal followed by reciprocating Urea Reactor – Unocal/Stamicarbon conventional design (1992) Urea Concentration – Crystallization, Crystal...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221284

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump manufactured by Kinney/Tuthill 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) 4" suction flange, 2" discharge flange. Requires 2...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221281

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump manufactured by Kinney/Tuthill 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) 4" suction flange, 2" discharge flange Requires 2....

Pump-Vacuum - IPP# 208379

• Manufacturer: Wiegand

Steam injection 4 effects with ceramic pistons and VICARB Carbon Block Heat Exchanger, Serial Number 1296, rated -1/3 bar @ 150 degrees C Service Side, volume 16 liter; -1/3 bar @ 150 degrees C process side, volu...

Stainless Steel 304 Centrifuge-Disc Bowl - IPP# 238437

• Manufacturer: Disco

continuous disc bowl centrifuge Rated 1 bar @ 50 deg C Sanitary construction for food processing Max feed temp 95 deg C Solids density: 1.42 kg/dm3, Heavy liquid density: 1.20 kg/dm3.Max feed temp 95 deg C. Motor...

Packed Column - IPP# 222790

• Manufacturer: Mechanica Sarda

300 kg/Hr, recovered VCM stripping system, designed to stripping unreacted VCM from PVC slurry process reducing vent gas to less than 1 ppm VCM. This system is EVC Technology, and can be used to strip volatiles f...

Packed Column - IPP# 222789

• Manufacturer: Mechanica Sarda

300 kg/Hr, recovered VCM stripping system, designed to stripping unreacted VCM from PVC slurry process reducing vent gas to less than 1 ppm VCM. This system is EVC Technology, and can be used to strip volatiles f...

Low Temp Chiller 771,107 kcal/h (255 Ref. Ton) - IPP# 216001

• Manufacturer: Trane

CentraVac Low temperture Series R chiller Requires 705 lbs. inlet at 33.8 degrees F, and outlet at 25 degrees F. (4 pass) Condenser NB # 4401, serial # 44010, built in 1996, rated for 300 psi at 300 degrees F.( 2...

Hastelloy - C22 Heinkel HF800 Centrifuge-Inverting Filter - IPP# 225440

• Manufacturer: Heinkel

new bearings, seals, belts, rebuilt hydraulic unit, and run in by the OEM 1600 RPM Maximum Solid Haynes Hastelloy C 22 for all process parts, 316SS for balance of exterior parts Clean in place nozzles for solids ...

Sterilizer - IPP# 207687

Designed for pass thru loading and unloading, with quick open doors front and back. Original Installation to a clean room 316 SS lined chamber Modified and re-rated in 1993 by Industrial Fabricating and Engineeri...

Tubular Reactor Stainless Steel 316 - IPP# 232538

• Manufacturer: Snowtech Hydro Cracker & Fisher Tropsch

Pilot plant, including an Agilent Tech Model 7890A-GC. Designed to operate at up to 725 psig and 572 degrees F in the auxiliary process vessels and 932 degrees F in the reactor tubing. The current set up includes...