Used Foundry & Casting

2007 Casting ladle ACETARC, 7 t

Type: ESSEX, serial number: 3123/67 With oilbath gearbox worm wheel and shaft number 4 With 2 spouts, without lining

Rest cast iron molds ±1000kg iron

Outer dimensions: Ø: 1000mm; Height: 470mm Internal dimensions: Ø 760 (top), Ø600mm (bottom), height: 350mm thick-walled

2006 Motorized casting ladle, 9 t, IBW

With manual gear motor, frequency controlled With control box and remote control With mechanical switch to "tilting by hand" With planet gearbox (possible to use for treatment ladle) With counter weight on the ov...

Casting ladle 2 t, SENSENBRENNER, with teapot spout

• Manufacturer: Senssenbrenner

With planet gearbox Ladle and refractory in good condition

2006 Motorized casting ladle, 14t, IBW

Door dimensions: depth: ø1750 mm, h. 1630 mm Motor: SEW, type: K47DT90L4BMG, 1,5 kW, 1410 rpm, 230/400 V Height of the hook ± 800 mm, with remote control With manual gear motor, frequency controlled With counterw...

2006 Motorized casting ladle, 14t, IBW

Vessel: depth: ø1750 mm, h. 1630 mm Height of the hook ±800 mm With motorized tilting and remote control With manual gearmotor, frequency controlled With counterweight on the overside With mechanical switch to "t...

Casting ladle UTARD, 2 t, with teapot spout

With gearbox In good condition Inside: 900 mm x 900 mm | Weight: 800 kg

Casting device with 4 ladles, ± 180 kg

Hand lip-poured ladles, content 150 - 200 kg (3 with cover and one without cover) With aerated suspension ring With hand wheel and locking

2002 Gravity die casting machine IMR C60X

• Manufacturer: IMR

Dimensions: Length: 3150mm; Width: 2500mm; Height: 1960mm 6KW; 400V; 50Hz Max opening of clamping plates: 700mm, side stroke: 335mm Hydraulic tank: 200l, max pressure: 60bar With 2 split dip tanks With light barr...

1992 Gravity die casting machine IMR C55

• Manufacturer: IMR

Dimensions: Length: 2600mm; Width: 2700mm; Height: 2000mm 5KW; 380V; 50Hz With 2 divided dip tanks With light barriers With SIEMENS S5 control unit

Gravity die casting machine, hydraulic 700×510mm

Dimensions: length: 1950mm; width: 700mm; height: 1800mm With 4 guides

Horizontal tiltable gravity die casting machine, hydraulic

Dimensions: Length: 2100mm; Width: 800mm ; Height: 1150mm Min opening: ±270mm; max opening: ±460mm With 2 guide rods Turnable With hydraulic power With hydraulic control by 2 levers 380V, 4kW

Gravity die casting machine, Hydraulic 600×400mm

Dimensions: Length: 2500mm; Width: 750mm; Height: 1500mm 3 guides Without hydraulic unit

Casting ladle, 2,8 - 3 t, brand KETTIN THIRIART

Outside: 1850 mm, h. 2000 mm Inside: Ø 1000 mm, h. 1020 mm Weight: 600 kg

2 lifting bails for small casting ladles, ± 60 kg

• Manufacturer: Kleine

Ø hole for ladles 350 mm, ladles ± 60 kg Ø ± 370/280 mm, height 390 mm Tiltable by hand Without chain hoist With 1 control for hoist