Used Tanks & Kettles in Germany

3300 liter heat-/coolable storage tank, Aisi 316

max. allowable working temperature: 80 °C max. allowable working overpressure (dj): 3.0 bar max. allowable working temperature (dj): 100 °C Temperature control cylinder (dj): half-coil technical equipment: level ...

42000 liter horizontal storage tank made of stainless steel 304

Volume: 42.000 liter | Bottom: torispherical bottom | Stand type: legs height adjustable | Quantity legs: 6 Piece | Diameter outside: 3.000 mm | Cylindrical length: 5900 mm | Total height: 3.650 mm | Total width...

10500 liter horizontal storage tank made of stainless steel 304

Volume: 10.500 liter | Bottom: torispherical bottom | Stand type: welded suppert saddle | Diameter outside: 1.800 mm | Cylindrical length: 4000 mm | Total width: 2.500 mm | Total length: 5.000 mm | Manhole: in t...

106 liter heat-/coolable tank, Aisi 316 with insulation

• Manufacturer: EDAK AG

max. allowable working temperature: 96 °C max. allowable working overpressure (dj): 2.0 bar Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Frame, Aisi 304...

3340 liter insulated pressure tank, Aisi 304

max. allowable working temperature: 150 °C Volume: 3.340 liter | Vacuum: 1,0 bar | Max. excess pressure: 3,0 bar | Stand type: legs height adjustable | Quantity legs: 3 Piece | Insulation: available | Insulating ...

800 Liter insulated pressure tank, Aisi 316

max. allowable working temperature: 130 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents remarks: Attention: outlet fitting extends beyond foot ends (former foot extensio...

100000 liter heat-/coolable pressure tank, Aisi 304

• Manufacturer: Apparatebau Nordhausen

max. allowable working overpressure (dj): 2.0 bar Temperature control cylinder (dj): half-coil remarks: The double jacket (615 liter) is divided into a total of 4 chambers

Unused 1000 liter heat-/coolable tank, AISI316

max. allowable working overpressure (dj): 2.5 bar Temperature control cylinder (dj): half-coil

800 Liter storage tank with sight glass, Aisi 304

remarks: Diameter of hand hole approx. 350 mm; slight signs of corrosion inside

1000 liter tank, Aisi 304 with jet stream mixer

• Manufacturer: Ystral

remarks: Total height estimated (deviations possible); Agitator supports may need to be relined for installation; Diameter outlet end approx. 35 mm EX-proof: motor is ex-proof (compliance with the new ATEX direct...

15000 liter tank, AISI304 with welded insulation jacket

notice: some residues of previous content, pipe end cut flush

650 liter electropolished rectangular pharma tank, Aisi 316

remarks: internal (moveable) fixtures; the outlet was probably fitted with a fitting, but this is no longer available (see photos)

100 liter heat-/coolable tank with anchor stirrer, AISI 304

• Manufacturer: Behälter KG

max. allowable working overpressure (dj): 1.0 bar Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Smaller dents in the tank lid; Most of the tank lid faste...

46500 liter isolated storage tank, Aisi 316

• Manufacturer: ALBI Alois Binderberger

max. allowable working temperature: 25 °C remarks: Cylinder manhole diameter: 600 mm; total height as per drawing without feet

63 liter insulated pressure tank, Aisi 304

max. allowable working temperature: 135 °C remarks: 2 support brackets, stainless steel; smaller dents and smaller sheet metal cuts in the insulation jacket