Used Processing in Overijssel, Netherlands

Dupatech DP70-3 XL

• Manufacturer: Dupatech

Maximum mold size: 700 x 585 mm | Maximum forming area: 650 x 535 mm | Forming height above sheet: 100 mm | Forming height below sheet: 130 mm | Maximum sheet width: 760 mm | Forming station closing force: 40000...

Dupatech DP70-3

• Manufacturer: Dupatech

Maximum mold size: 700 x 500 mm | Maximum forming area: 650 x 450 mm | Forming height above material: 100 mm max. | Forming height below material: 130 mm max. | Maximum sheet width: 760 mm | Sheet thickness: 0.1...

Dupatech DP90-4

• Manufacturer: Dupatech

Maximum mold size: 920 x 720 mm | Maximum forming area: 870 x 670 mm | Forming height above material: 150 mm | Forming height below material: 160 mm | Maximum sheet width: 970 mm | Sheet thickness: 0.1 - 1.8 mm ...

Mold illig RDM70K 92mm dia PET MOLD

• Manufacturer: Illig
• Model: RDM

Dupatech DP70-4

• Manufacturer: Dupatech

Maximum mold size: 700 x 500 mm | Maximum forming area: 650 x 450 mm | Forming height above material: 100 mm | Forming height below material: 130 mm | Maximum sheet width: 760 mm | Sheet thickness: 0.1 - 1.5 mm ...

1987/1988 Welex PS/PP Sheet line

• Manufacturer: Welex

Output (kg/hr): 350-400 | Sheet thickness: 0.35 mm - 1.4 mm | Sheet width: 1104 mm

Dupatech R/A PET (Mono or Multilayer)

• Manufacturer: Dupatech

Output (kg/hr): 200 -1000 | Energy consumption: 0.33 Kwh/ | Sheet width: 500 mm - 1500 mm | Sheet thickness: 0.2 mm - 1.5 mm

2002 Vacuum lifter Muyen, VA106/VA101

• Manufacturer: Muyen
• Model: VA

Laminated glass cutting machine, Bottero, 515 LAME/37, 2017

• Manufacturer: Bottero

Compressor Airpress, HL310-25

Cutting table, Bottero, 352BCS, 2002

• Manufacturer: Bottero
• Model: 352 BCS

Compressor setup Airmec

1999 Glass washing machine Polyglass, LV1500LC

Water Purification Installation

Reverse osmosis process Grundfos water pumps. Complete with all filters, sensors, shutoffs, pipes and containers In this case used for water purification for water weaving machines.

Blower part

Aluminum diameter impeller 340mm, bore approx. 32mm.