Used Processing in Hamburg, Germany

2000 CMPI ANTARES 2D+8A/800-
- Manufacturer: CMPI
- Model: Antares
Calibration and polishing machine for marble 2 calibration heads 8 polishing heads Max. working width: 800 mm Max. working thickness: 100 mm Min. working thickness: 10 mm Voltage: V/Hz 400/50 Calibration spindle ...
Hamburg, Germany
2006 Löffler MG 100
- Manufacturer: Löffler
Edge polisher 5 planetary heads, some in mint condition 1 pivoting water groove support 1 calibration support Right-to-left rotation New control system Modern circular guides Machine length approx. 13.7 m Excelle...
Hamburg, Germany
2004 GMM Lexta 36 FULL
- Manufacturer: GMM
- Model: Lexta 36
Bridge saw Max. saw blade diameter: 825 mm Optional: Automatic table, swivel head, frequency converter for motor pulley The frequency converter pulley, display, and motor pulley were replaced in November 2024. Vo...
Hamburg, Germany
2003 Montresor LOLA 1000
- Manufacturer: Montresor
- Model: Lola 1000
Edge grinder for straight edges Grinding and polishing of straight edges with upper and lower chamfers, Calibration 8 heads for straight polishing 3 upper and 3 lower spindles for chamfering Water drop unit The m...
Hamburg, Germany
2016 Prometec- -
- Manufacturer: Prometec-
Complete resin coating system for marble slabs Burner power: Electric Rotating slab holder Automatic loading Drying oven with 50 slabs Brushes for slab cleaning Automatic distributors for reinforcing mesh Automat...
Hamburg, Germany
2004 GMM GIGA 3500-
- Manufacturer: GMM
- Model: Giga 3500
Block saw Maximum saw blade: 3500 mm Cutting stroke of the X-axis of the saw: 4,000 mm Max. stroke Y-axis carriage: 2,800 mm Max. stroke Z-axis: 2,200 mm Size of the carriage: 2,200x3,000 mm Maximum cutting thick...
Hamburg, Germany
1998 SIMEC NT 2/50-
- Manufacturer: Simec
Multi-blade block cutter Vertical saw blade diameter mm. 1600 Horizontal saw blade diameter mm. 400 Motor vertical saw Kw 200 Motor horizontal saw Kw 15 Number of vertical cutting discs 52 The machine was fully m...
Hamburg, Germany
2022 Fravizel Lynx + Halley MFCR 55
- Manufacturer: Fravizel
Mobile diamond wire saw on crawler undercarriage Built in 2022, start up in 2023 55 KW motor The upper rails are used for cutting blocks or walls. The wire saw moves along the approximately 8,000 mm long green un...
Hamburg, Germany
2004 Spielvogel Colibri S7
- Manufacturer: Spielvogel
Bridge saw/circular stone saw The machine has a turntable and can be loaded from the front and right side. A Heglmeier program for automatic cutting is installed. The usual automatic programs, lowering, bevel cut...
Hamburg, Germany
2021 Burkhardt Löffler CSA 567
- Manufacturer: Löffler
Semi-gantry bridge saw with 1200 mm saw blade Long travel 16.5 m x 4 m 4 workstations (1 long table) including 4 digital cameras, optional support tables Machine is sold only with accessories (spare parts, millin...
Hamburg, Germany
2007 Marmo Meccanica LTV 621 DX-
- Manufacturer: Marmo Meccanica
Edge polishing machine for flat and round edges Polishing heads 6 Bevels: 2 Working thickness: 10 ÷ 60 mm Overall dimensions (without roller conveyors): 4.5 x 2.3 x 1.7 m Total weight: 2,900 kg Working direction:...
Hamburg, Germany
1991 Pedrini M 580 GR-
- Manufacturer: Pedrini
Block cutter - SCALETTA Motor, rated power – 190 kW. 32 vertical discs (cutting thickness 12 mm) Min. disc, d: 1000 mm Max. disc, d: 1600 mm Shaft D: 110 mm; shaft length: 600 mm Diameter of the horizontal disc –...
Hamburg, Germany
2010 BIDESE Gold 14 V-
- Manufacturer: Bidese
Bidese Multiwire Number of ropes: 14 Rope length: 21,040 mm, rope diameter 7.3 mm Engine power: 75 KW Cutting dimensions: 3,600x2,100 mm Accessories: Block trolley Condition of the machine: Good Weight: 23.5 t Po...
Hamburg, Germany
P. Cruz / Longinotti
- Manufacturer: P. Cruz / Longinotti
Marble polishing machine for 2 m wide slabs with: - 1 calibrating machine (originally a polishing machine, converted to a calibrating machine) with 12 heads. You can set the desired heads as calibrating heads and...
Hamburg, Germany
2009 BRETON SMART-CUT S/NC 800
- Manufacturer: Breton
- Model: Smart Cut
Bridge saw with interpolating axes. Rotating head and fixed work table. Suction cup pick-and-place system. Latest generation SIEMENS NC. Rotating head with ± 190° rotation around axis "C" and 0° to 90° rotation a...
Hamburg, Germany