- Trusted Seller
2000 AMADA TPL80SI
used
- Manufacturer: Amada
- Model: TPL-80
Amada TPL80SI Single Point, Link Drive, Gap Frame Press 80 Ton Amada TPL80SI, 5.1" Stroke, 17.9" Shut Height, 50-95 SPM, 40.5" x 23.6" Bolster Area, 21.7” x 17.7” Slide Area, 3.2” Slide Adjustment, Wet Type Clutc...
Elk Grove Village, IL 
Modern Hydraulic Press 300T Hobbing Stamping Press Model 1A-300
used
- Manufacturer: MODERN HYDRAULIC CORP
Up Acting Hobbing Press Platten Size: Make: Modern Hydraulic Press Co. | Tonnage: 300 | Maximum stroke: 8" | Operating pressure: 4500 PSI | Pump low pressure: 20 GPM | Pump high presser: 2.5 GPM | Left to right: ...
Watertown, CT- Trusted Seller
Hugold Air Press Stamping Assembly Press Pneumatic in Unknown Condition
used
- Manufacturer: Hugold
RUNS ON 80 TO 100 PSI OF AIR (can connect to a normal compressor) 6 INCHES OF DIE HEIGHT Bid with Confidence on this item, check our feedback!!! * All information deemed accurate but may vary from model to mode...
$495 USDProvidence, RI - Trusted Seller
Hugold Air Press Stamping Assembly Press Pneumatic in perfect condition
used
- Manufacturer: Hugold
This is a used Hugold Air Press in excellent condition! RUNS ON 80 TO 100 PSI OF AIR (can connect to a normal compressor) 6 INCHES OF DIE HEIGHT (fully adjustable stroke) Palm Tree # LR-0000-101121-A Bid with ...
$595 USDCentral Falls, RI 
DANLY SE4-1400-216 X100TQ
used
- Manufacturer: DANLY
Standard Specifications: Model SE4-1900-216 x 100 TQ Straight side Eccentric 4 point double crank transfer press 40" Stroke of slide 83" Shut Height to bed 63" Shut Height -Adaptor to carrier 68" Shut Height-Slid...
Detroit, MI- Trusted Seller
Hugold Automated Stamping Crimping Air Press with Rotary Table and Tooling
used
- Manufacturer: Hugold
This is a Hugold Automated Stamping Crimping Air Press with Rotary Table and Tooling - Dayton A.C. Induction Motor: - 1/2 Hp - 60 Hz - Single Phase - 1725 RPM PTWS - 04302023-LR-02 Picture# 04282023 * All inf...
Central Falls, RI - Trusted Seller
Perkins 9 Ton Punch Press Crimping Stamping Steel Brass
used
- Manufacturer: Perkins
- Model: 200B
This is a Perkins Punch Press in excellent condition. - Model # 200 B - Serial #25053 - 9 Tons - 3 Phase - 3/4 Hp - 60 Cycle - 1140 RPM - 208/220/440 Volts - 3.5/1.7 Amps - Ram Adj. 1 1/2" - Shut Height 6 1/2 " ...
Central Falls, RI - Trusted Seller
Perkins Transfer Stamping Punch Press Machine with Feed 15 Ton Pristine!
used
- Manufacturer: Perkins
WE HAVE 3 AVAILABLE! TRANSFER PRESSES...These presses have a double individual stroke timed for progressive tools... great for piercing and blanking after pierced. Also, to dome then blank.... fast and can be do...
$1,295 USDProvidence, RI - Trusted Seller
Die Cutting Stamping Press with Rapid Servo Stock Feed Automatic Diecut
used
Standard H Frame Stamping Press with Variable Frequency Drive Rapid Air Pro Servo Feed: Model # 112C Serial #110344 Servomotor: Serial # 366110 7.5 Amps 2009 SK: 22-90 L/4 S/N: 199911021056 Ratio: 14.69 S.F Max T...
- Trusted Seller
Baird 15 Ton Stamping Punch Press Made in USA Bridgeport CT
used
- Manufacturer: U.S. Baird
Baird Mfg. Co. Bridgeport, CT. USA 15 Ton Double Palm Buttons Induction Motor: 1 HP 3 Phase 50/60 Cycle 220/440 Volts 1755 RPM Palm Tree # LR-0000-03302020LR-47 R042924 Pic# 12192019 Bid with Confidence on thi...
$1,295 USDProvidence, RI - Trusted Seller
Bliss 20 Ton No. 62 Stamping Punch Press Metal Stamper 220V 3PH
used
- Manufacturer: Bliss
This is a Bliss 20 Ton Stamping Punch Press Metal Stamper - Model # 62 - Serial #479698 - Three Phase - 2 Hp - 900 RPM - 220/440 Volts - 7/3.5 Amps PTWS - 05292023-CHRONO-1 R102224 Picture# 05242023 * All in...
$2,995 USDCentral Falls, RI - Trusted Seller
Kenco 10 Ton Punch Press 460 Volts Crimping Stamping Steel Brass
used
- Manufacturer: Kenco
This is a 10 Ton Kenco Punch Press ...in excellent condition! - Model # 102-335-200 - Serial # 87-275 - 10 Tons - 460 Volts - 60 Hz - Three Phase - 90 SPM PTWS - 05072023-LR-3 Picture# 05062023 * All informat...
$2,995 USDCentral Falls, RI - Trusted Seller
Perkins 20 Ton Stamping Press Air Clutch Air Brake Automatic Punch Pristine!
used
- Manufacturer: Perkins
Perkins Punch Press Air Clutch Air Brake 20 Ton 220V 3 Phase Perfect Running Condition Stroke 1-1/2" Shank 1-1/2" Bed Area 11" x 21" Palm Tree # TC-000000-051119-D Bid with Confidence on this item, check our fe...
$3,495 USDProvidence, RI 
WMW Erfurt 100 Ton Stamping Transfer Press 12 Ops 6” Stroke Complete
used
- Manufacturer: Erfurt
• 380 Volts – needs a transformer to run in the USA. • 6” Stroke – can make 2.5” tall parts • 100 Tons – straight side press with double crank • Includes built in blanking station in very first operation. • Scrap...
Watertown, CT- Trusted Seller
Danly Precision Die Set for stamping press with Tool in it Punching Piercing
used
- Manufacturer: Danly
Cat No. 0604 B 4 Lenkeit Industries: Job No.: 16874 Part No.: Frame.Die 3 Ton Req. Top Shoe Weight: 18 Lbs Shut Height: 5 1/2 Total weight: 47 Lbs Palm Tree # LR-0000-12072019LR-33 Pic# 11192019 Bid with Confi...
$295 USDProvidence, RI 
Amada TP-150EX Stamping Press
used
- Manufacturer: Amada
- Model: TP-150EX
Good condition Amada TP-150EX Stamping Presses manufactured in 2000. Located in United Kingdom and other countries. Click request price for more information.
United Kingdom
Tip: Enter manufacturer, model or keyword