Used threading tools in Canada

SASPI GV3-20

• Manufacturer: SASPI
• Model: GV3-20

Equipped With * 28" Vibratory Feeder Bowl * Adjustable Pitman * Coolant Tank

WATERBURY #30

• Manufacturer: Waterbury Farrel
• Model: 30

Equipped With * Coolant pump * Auto lube Maximum diameter: 1/2" | Maximum thread length: 4" | Maximum depth of dies: 4-1/8" | Shank length: 8" | Speed: 60 ppm | Motor: 15 hp | Electrics: 460/3/60 | Weight (approx...

Ruja Falcon #50

• Manufacturer: Ruja

Equipped With Wire diameter range: 0.8mm - 1.8mm | Nail length range: 6.5mm - 40mm | Output: 800 PPM | Motor: 1.5kW | Weight, approx: 830 kgs | Dimensions: 140x90x140cm

HARTFORD 000-1000

• Manufacturer: Hartford
• Model: 000-1000

Equipped With * Rotary Hopper Location: Screw diameter range: 0.45" - 1/8" (.045"-.125") | Maximum thread length: 9/16" | Maximum shank length: 1" | Speed: 350-1000 ppm | Weight approx.: 1500 lbs

WATERBURY #30

• Manufacturer: Waterbury Farrel
• Model: 30

Equipped With * Coolant pump * Auto lube Maximum diameter: 1/2" | Maximum thread length: 4" | Maximum depth of dies: 4-1/8" | Shank length: 8" | Speed: 60 ppm | Motor: 15 hp | Electrics: 220/3/60 | Weight (approx...

Warren WT-500

• Manufacturer: Warren
• Model: WT-500

Equipped With Screw diameter capacity: #0000 - #6-32 (3.55mm) | Blank length: Up to 1-1/4" (31.75mm) | Speed range: 150 - 1100 ppm | Max thread length: 1-1/8" (28.57mm) | Die requirement: #00 or #000 | Main motor...

1991 Warren WT-20

• Manufacturer: Warren

Equipped With * 24" Vib feeder bowl * Adjustable pitman

1999 INGRAMATIC RP-31 LV

• Manufacturer: Ingramatic
• Model: RP-31

Equipped With * Requires Vibratory Feeder Wire diameter: 5 - 10 mm | Length under-head: 135 mm | Thread length: 10 - 80 mm | Pieces per minute: 120-310 | Die dimensions: 130-150mm | Electrics: 480V/3/60 | Weight,...

1973 PELTZER & EHLERS NKW-K-24

• Manufacturer: Peltzer & Ehlers

Equipped With * Elevator Hopper Largest bolt dia. at 550n/mm?: M 27 ( 1" ) | Largest bolt dia. at 800n/mm?: M 24 ( 7/8" ) | Max. thread length: 125mm ( 5" ) | Shank length: 35 - 200 mm ( 1 3/8 - 8" ) | Output: up...

WATERBURY FARREL #40

• Manufacturer: Waterbury Farrel
• Model: 40

Equipped With Note: Main gear missing one tooth | Maximum diameter: 5/8" | Maximum thread length: 4-1/2" | Die pocket: 6-1/4" x 1" x 4" | Motor: 5 HP | Electrics: 220volts | Output: up to 50 PPM | Weight (approx)...

GPM SERIES

Model GPM-25C Planetary Die Double End Thread Rolling Machine The GPM series models offer single or double ended thread rolling, from diameters of 6-33mm (1/4"-1-1/4") either via the standard magazine feeder, or ...

GPM SERIES

Model GPM-16C Planetary Die Double End Thread Rolling Machine The GPM series models offer single or double ended thread rolling, from diameters of 6-33mm (1/4"-1-1/4") either via the standard magazine feeder, or ...

ROT Series

Model ROT-1 Two Die Two Station 25tons PLC Controlled Cylindrical Thread Rolling Machine > The ROT-1 machine has been designed & produced to meet ball stud producers with high volume demand > There are total of 2...

HK SERIES

Model HK-18 (18Ton) 2Die Cylindrical Thread Rolling Machine > The HK series of hydraulic rolling machines are equipped with two rolling spindles, with one moving head. > All machines equipped with AC Variable Spe...

K SERIES

Model K-50 (50Ton) 2Die Cylindrical Thread Rolling Machine > The K series of hydraulic rolling machines are equipped with two rolling spindles, with one moving head in linear guides which have auto lubrication sy...