Used controllers

Double floor type grinder DÜRRSCHMIDT/VITEX, 760 mm, 50m/s

Motor CEM, Type: MJPP180MN4, serial number: L617626, 22 kW, 220/380 V, 1450 rpm Driving by beltsstone max 760 mm, stone width 60 mm Speed 50/s Files plates 260x90 mm (2x) With control cabinet

2019 Small round coating basin ±80l MJS

• Manufacturer: MJS

External dimensions: length: 750mm; width: 540mm, height: 1100mm Useful dimensions: Ø470mm; depth: 570mm Capacity ±80 litres For water sizing With 1 agitator; 0.75 kW Frequency-controlled, Speed adjustable by kno...

2024 Small round coating basin ±80l MJS

• Manufacturer: MJS

External dimensions: length: 750mm; width: 540mm, height: 1100mm Useful dimensions: Ø470mm; depth: 570mm Capacity ±80 litres For water sizing With 1 agitator; 0.75 kW Frequency-controlled, Speed adjustable by kno...

Transport screw, 4500 mm, Ø ± 300 mm

External dimensions: length 4650 mm, width 680 mm, height 540 mm Engine: 2,2 kW, 380 V, brand BAUER, type drive engine, 1420/57 rpm Outlet Ø 160 mm With control door With double chaine drive

Lining spraying unit SAS 3

Type : III E7, serial number: 3190 With loading container, hand slide valve for lift track and long flex pipe Filling hole wicht pneumatic clap Spraying system over screw With motor and frequency converter On 3 w...

1987 Hydraulic core shooter VOGEL & SCHEMMANN, 15 l

• Manufacturer: Vogel

Type: KSM61500 CB/0C02, serial number: 4323, Com. number: 18.828 In good condition Completely equipped in cold box, with cabin, automatic control, all the movements are hydraulic Max dimensions of core boxes: hei...

2002 Gravity die casting machine IMR C60X

• Manufacturer: IMR

Dimensions: Length: 3150mm; Width: 2500mm; Height: 1960mm 6KW; 400V; 50Hz Max opening of clamping plates: 700mm, side stroke: 335mm Hydraulic tank: 200l, max pressure: 60bar With 2 split dip tanks With light barr...

Screw mixer for core sand 6t/h REISAUS-BAUMBERG

• Manufacturer: REISAUS-BAUMBERG

5,5kW, 400V 50Hz Dimensions: Lenght: 2830mm; With hopper and filling level sensor (3 dosages possible) With 2 screw for additiv With 2 acid pumps With control board PLC SIEMENS S7 Mixer is swivelling by hand Mixe...

Degassing unit (impeller) FOSECO/BOMA

• Manufacturer: Foseco

Dimensions: Length: 2300 mm; Width: 900 mm; Height: 2980 mm Minimum height under arm: 1400 mm; maximum: 2600 mm 2.5 kW, 400 V; 16 A; 50 Hz With blade With CE certification With Siemens S5 control system On a trol...

Core shooter ROEPER / LAEMPE, LKV25

• Manufacturer: Laempe / Röperwerk

Gassing plate fixed by vacuum Vacuum fixing of core box Hydraulic group STROMBERG Serial number 2736042, Type: HXU225G2V, 1, 4 kW, 380 V, 8,7 A, 1430 rpm Electric control cabinet BCR (BERNECKER und RAINER), type ...

Furan sand reclamation plant OMEGA

• Manufacturer: Omega

Consisting of: -Shake out: dimensions: 1230mm×1300mm With suction hood Inclusive crusher -Fluid bed cooler (Without water cooler) -Sand transmitter -Magnetic drum -1× attrition unit -Fluid bed dust extractor -pne...

1982 Semiautomatic shell moulding machine for cold and hot box, FMI

• Manufacturer: G&F + FMI, type FM 10AC

Construction year: 1982, weight: 500 kg Clamping dimension of the thermal jaws: 450 mm x 320 mm, one chucking side fixed, one chucking side mobile Heated with gas Gas heating with mobile gas plate With pneumatic ...

Vibration polishing machine ROTO FINISH, 1100 mm x 420 mm

4 kW, 380/440 V, 7 A, turns left-right Ø 220mm trap exchange stones Vibration by unbalance motor Vibration with stones and water Rubber inside, in good condition With polishing stones Without control box Delivery...

2018 Pouring installation HWS P-20-R; 4 x ladles 2t

• Manufacturer: HWS

With 4 ladles and 2 ladle lids Pouring time stationary: 17kg/s; synchronised: 8kg/s Max acceleration with synchronised movement to the moulding system: 0.25m/s2 With SIEMENS S7 control cabinet and GLS2010 monitor...