Building Filters
1979 ZEULENRODA PYE 10 S1
- Manufacturer: Zeulenroda
- Model: PYE 10
- Power requirement: 5.2 kW
Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 10 t | Discharge: 250 mm | Hub: 400 mm | Speed off: 100 mm/sec | Speed up: 450 mm/sec | Distance table - ram: 630 mm ...
Schmölln, Germany
1986 ZEULENRODA PYE 160 S1M
- Manufacturer: Zeulenroda
- Model: PYE 160
- Power requirement: 17 kW
Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 160 t | Discharge: 360 mm | Hub: 500 mm | Speed off: 200 mm/sec | Speed up: 125 mm/sec | Distance table - ram: 1000 m...
Schmölln, Germany
1987 ZEULENRODA PEDV 63
- Manufacturer: Zeulenroda
- Power requirement: 6 kW
Machine is dismantled and partially overhauled -new color scheme -new control cabinet -conversion to safe operation -repair
Schmölln, Germany
ZEULENRODA PED 63/2
- Manufacturer: Zeulenroda
- Power requirement: 6 kW
The following work is to be carried out on the machine / Partial overhaul: - Machine is dismantled, checked - Machine is repainted - New lubrication unit Vogel - New cam switch unit - New control cabinet with tou...
Schmölln, Germany
1982 ZEULENRODA PED 63/3
- Manufacturer: Zeulenroda
- Power requirement: 6 kW
The following work is to be carried out on the machine / Partial overhaul: - Machine is completely dismantled, checked - Machine is repainted - New press safety valve - New separate control cabinet with touch pan...
Schmölln, Germany
1969 ZEULENRODA PEDN 63/2
- Manufacturer: Zeulenroda
- Power requirement: 6 kW
- inclinable - ram is equipped with breaking plate safety device - table clamping plate - Ram adjustment by means of ratchet - Balluff cam indexing system Machine is not safe for manual insertion operation!
Schmölln, Germany
ZEULENRODA PYE 10 S S
- Manufacturer: Zeulenroda
- Model: PYE 10
- Power requirement: 8.5 kW
- without clamping plate - only approved for work with closed tools
Schmölln, Germany
1997 ZEULENRODA PED 100/3
- Manufacturer: Zeulenroda
- Model: PED 1003
- Increased installation height - with draw cushion - converted to safe control (Pilz PLC), safe for manual insertion work on the open mold
Schmölln, Germany