Used Processing in Piedmont, Italy

PIOVAN - Q12 - Gravimetric dosing units - 2023

• Manufacturer: Piovan

PIOVAN gravimetric dosing units with filter and suction system for vacuum generation. Approximate full body dimensions: 2200 x 800 x 2500 mm Warning: the information reported has been taken on board the machine u...

ARBURG - ALLROUNDER ALLDRIVE 520A 1600-400 - Plastic injection molding machine - 2007

• Manufacturer: Arburg
• Model: Allrounder 520

Clamping Force: 160 Ton Maximum opening stroke: 450 mm Mold height: between 250 and 550 mm Distance between plates: 1000 mm Plate dimensions: 795x795 mm Distance between columns approx.: 520 x 520 mm Maximum weig...

MORETTO - Vacuum system

• Manufacturer: Moretto

Vacuum creation system for serving plastic injection molding machines. Composed of a line of MORETTO hoppers of different capacities, connected to a flowmatic server unit and a dehumidification system. Connected ...

DEMAG - ERGOTECH 1000-310 - Plastic Injection Molding Machine - 1998

• Manufacturer: Demag
• Model: Ergotech

Clamping Force: 100 Ton Holding force: 100 Ton Maximum opening stroke: 500 mm Minimum mold height: 250 mm Distance between plates: 750 mm Plate sizes: 580 × 590 mm Distance between columns: 400 × 400 mm Maximum w...

HTST PLATE PASTEURIZER for liquid products

• Manufacturer: TAS Impianti

PLATE PASTEURIZER FOR LIQUID PRODUCTS HTST pasteurizer with plate heat exchanger for continuous pasteurization of liquid products. The machine allows the pasteurization of liquid food products such as milk, beer,...

TAS Impianti Hot Air Dryer - Our "ES12" model

• Manufacturer: TAS

Hot air dryer - Ns. mod. "ES12" The machine was conceived, designed and manufactured with the aim of reducing moisture in granular food products. Entirely made of aisi 304 stainless steel for product contact part...

TAS Impianti Hot Air Dryer - Our "ES12" model

• Manufacturer: TAS

Hot air dryer - Ns. mod. "ES12" The machine was conceived, designed and manufactured with the aim of reducing moisture in granular food products. Entirely made of aisi 304 stainless steel for product contact part...

CSC - Buffer tank - 2019

Approximate dimensions: D1200 x 2500 mm Consider at least 1400 mm of lateral clearance due to flanges and valves. Capacity: 3000 litres Pressure: 12 bar Warning: the information reported has been taken on board t...

PNEUMOFORE - DS 0550 - Dryer

Refrigerant: R134A - Load: 1.25 kg Maximum operating pressure: 16 bar Power: 1.2 kW Approximate dimensions: 1800 x 900 x 1600 mm - both bodies The values shown refer to a single dryer that is part of two connecte...

INGERSOLL RAND - R55N-A10 - Screw Compressor - 2015

• Manufacturer: Ingersoll Rand
• Model: R55N

Maximum operating pressure: 10 bar Power: 55 kW Revolutions per minute: 2990 rpm Dimensions: approx. 2400x1250x2050mm Warning: the information reported has been taken on board the machine and may not correspond t...

3000x1500 POLI Cast iron surface plate

• Manufacturer: 3000x1500

Technical details: 3000 x 1500 x 265 mm | Weight: 2100 kg | Overall dimensions: 3000 x 1500 x 265 mm

5010x2375 Cast iron surface plate

• Manufacturer: 5010x2375

N.1 U marking line 10 mm Technical details: 5010 x 2375 x 300 mm | Weight: 8000 Kg | Overall dimensions: 5010 x 2500 x 300 mm

FROHN VDFI 8001 HV 640 Steel cut wire for shot peening

• Manufacturer: FROHN

Grain size: 0,6 mm - Grain shape: G1 - Hardness: 640 HV - Specification: VDFI 8001