Used dcs

DC-648 High Production Slitter/Cutter/Creaser

• Manufacturer: Duplo

The Duplo DC-648 Slitter/Cutter/Creaser is an advanced all-in-one Slitter/Cutter/Creaser designed for high-speed production of full-bleed applications, handling up to 40 sheets per minute. It combines speed, dura...

22″ x 4″ x 10,000 Lb. TACKE OLALDE Slitting Line #2520

2520 TACKE OLALDE Coil Car Lifter Hydraulic Feed Up Drive Air Brake Manual Expansion Entry Guide Driven Pinch Rolls Motor With Reducer Drum for 20″ I.D. 508 mm) Manual Gripper Slot and Expansion Overarm Separator...

Littell 12″ x .125″ x 4,000Lb Stk# 14457

• Manufacturer: Littell

BLISS slitting line, Model 12″ x .125″ x 4,000Lb Stk# 14457. 12" X 0.125" BLISS SLITTING LINE Stock # 14457 Mandrel Uncoiler Manual Expansion Drag Type Brake Slitting Head Powered Arbor Adjustment Sliding Outboar...

RUESCH 177

• Manufacturer: Ruesch
• Model: 177

24" (609mm) x 6 1/2" (165mm) RUESCH MODEL 177 SLITTING HEAD (10610) MACHINE # 10610 MANUFACTURER: RUESCH MACHINE COMPANY, NEW JERSEY MODEL: 177 157 HP, SERVICE FACTOR 1.O, RATIO 18:07 TO 1 850 RPM, INPUT, SIZE 12...

GARY 4930S972 #85869

• Manufacturer: Gary

Coil weight capacity: 30000 pounds | Width capacity: 72 inches | Capacity: 12 GAUGE | Pass line height: 60 inches | Slitting heads: 2 | Slitting arbors: 75" X 6" DIAMETER | Pinch roll: 78" X 7" DIAMETER | Drive ...

STANAT 18" LOOPING SLITTING LINE

• Manufacturer: Stanat

18" (457mm) x 4 1/4" (108mm) STANAT LOOP SLITTING LINE (12951) MACHINE# 12951 SPECIFICATIONS:MANUFACTURER: STANAT PRECISION MACHINE CO. (U.S.A.) PAYOFF:MODEL: 7M-24 DRAW TYPE SCRAP WINDER RECOILER:I.D. RANGE: 15 ...

60´´ X .500´´ ALCOS SLITTER HEAD W/ SHIMLESS TOOLING (USED)

Features: With Solid State SCR Drive Orbit Hydraulic Adjust Twin Roll Entry Side Guides, Single Screw With Shimless Tooling

48´´ Paxson Slitting Line Components (Used)

• Manufacturer: Paxson

Components Include: Slitter Head 50" wide x 6" diameter arbors w/ pinch rolls & edge guides Scrap Winder Hyd. self dumping w/ oscillation Recoiler w/ attached overarm separator 54" Drum x 20" Diameter Right to L...

RUESCH / STAMCO SLITTING LINE

• Manufacturer: Ruesch

RUESCH / STAMCO SLITTING LINE Ruesch / Stamco complete Line, 26" x 10,000 lbs, .005" - 0.1" thickness *Equipped with tooling for 1" wide strips* Line Consists of the Following: Stamco Mandrel Uncoiler 28.5" Face,...

72" x 8" Arbor Strilich Injector Slitter Heads

• Manufacturer: Strilich

Specifications: Arbor Width: 76" Product Width: 74" Arbor Diameter: 8" Gauge Range: .017" - .135" Motor: 30 HP, 1750/2300 / 500V Baldor DC Motor

26" x 4.12" x 10,000 LB STAMCO RUESCH SLITTING LINE 14017B

• Manufacturer: Ruesch

MODEL #: N/A SERIAL #: N/A DOUBLE LOOP DESIGN 26" WIDE 10,000 LB COIL WEIGHT 60" MAXIMUM COIL OD LEFT TO RIGHT LINE DIRECTION CONSISTS OF THE FOLLOWING: SOUTHWORTH ENTRY COIL CAR SELF CONTAINED 32" LIFT STAMCO M...

72" X .187" X 60,000 # PAXSON SLITTING LINE. #0470224

• Manufacturer: Paxson

General Specifications: Line Includes: Entry Transfer Cart Mechanical Traverse Entry Coil Car Floor Standing L-Type Design Hydraulic Lift & Traverse Self - Contained Hydraulics Mandrel Uncoiler Powered Hold-Down ...