Used Sheet Metal Processing in Germany

1985 EDEL Stanzprofi 400 #1052-01022
- Manufacturer: Edel
- Model: STANZPROFI 400
- Power requirement: 3.2 kW
- with DRO on Y-axis Accessories with various punches and dies
Bühl, Germany
2012 HSM ABW-ROTA-2200
- Manufacturer: HSM
Cutting width max. (mm): 2100 | Heating: included | Cooling: included
Bad Oeynhausen, Germany
1982 WMW GOTHA UBR 10 x 2000/ 1-16
- Manufacturer: WMW
- Model: UBR 10X2000/1-16
backup rolls supports (on top/at the bottom) main drive
Freudenberg, Germany
DURMA PBM-50
- Manufacturer: Durma - Durmazlar
- Power requirement: 1.5 kW
Control: konventionell | Angle steel/side length: siehe TD mm | Double t-iron on the x-axis: siehe TD mm | U-iron on the x-axis: siehe TD mm | Total power requirement: 1,5 kW | Weight of the machine ca.: 0,385 t...
Göppingen, Germany
DURMA PBH-600
- Manufacturer: Durma - Durmazlar
- Model: PBH-600
- Power requirement: 120 kW
Control: konventionell | Angle steel/side length: siehe TD mm | Double t-iron on the x-axis: siehe TD mm | U-iron on the x-axis: siehe TD mm | Total power requirement: 120 kW | Weight of the machine ca.: 78 t | ...
Göppingen, Germany
DURMA PBH-125
- Manufacturer: Durma - Durmazlar
- Power requirement: 15 kW
Control: konventionell | Angle steel/side length: siehe TD mm | Double t-iron on the x-axis: siehe TD mm | U-iron on the x-axis: siehe TD mm | Total power requirement: 15 kW | Weight of the machine ca.: 4,6 t | ...
Göppingen, Germany
DURMA PBH 100
- Manufacturer: Durma - Durmazlar
- Model: PBH 100
- Power requirement: 11 kW
Control: konventionell | Angle steel/side length: unbkt, mm | Double t-iron on the x-axis: unbkt. mm | U-iron on the x-axis: unbkt. mm | Total power requirement: 11 kW | Weight of the machine ca.: 3,36 t | Dimen...
Göppingen, Germany
DURMA PBH 360
- Manufacturer: Durma - Durmazlar
- Model: PBH 360
- Power requirement: 77 kW
Control: konventionell | Angle steel/side length: unbkt mm | Double t-iron on the x-axis: unbkt mm | U-iron on the x-axis: unbkt. mm | Total power requirement: 77 kW | Weight of the machine ca.: 45 t | Dimension...
Göppingen, Germany
DURMA PBH-80
- Manufacturer: Durma - Durmazlar
- Power requirement: 7.5 kW
Control: konventionell | Angle steel/side length: siehe TD mm | Double t-iron on the x-axis: siehe TD mm | U-iron on the x-axis: siehe TD mm | Total power requirement: 7,5 kW | Weight of the machine ca.: 2,35 t ...
Göppingen, Germany
DURMA PBM-30
- Manufacturer: Durma - Durmazlar
- Model: PBM-30
Control: konventionell | Angle steel/side length: siehe TD mm | Double t-iron on the x-axis: siehe TD mm | U-iron on the x-axis: siehe TD mm | Total power requirement: kW | Weight of the machine ca.: 0,2 t | Dim...
Göppingen, Germany
DURMA
- Manufacturer: Durma - Durmazlar
- Power requirement: 30 kW
Control: konventionell | Angle steel/side length: unbkt. mm | Double t-iron on the x-axis: unbkt. mm | U-iron on the x-axis: unbkt. mm | Total power requirement: 30 kW | Weight of the machine ca.: 8,6 t | Dimens...
Göppingen, Germany
DURMA PBH 240
- Manufacturer: Durma - Durmazlar
- Model: PBH 240
- Power requirement: 37 kW
Control: konventionell | Angle steel/side length: unbkt mm | Double t-iron on the x-axis: unbkt. mm | U-iron on the x-axis: unbkt. mm | Total power requirement: 37 kW | Weight of the machine ca.: 16 t | Dimensio...
Göppingen, Germany
2009 BEHRINGER-EISELE VAL 350 NC 1 PV HY
- Manufacturer: Behringer
Cold saw for alumonium, sawing cap round 115 mm, SPS Control, with roller conveyors
Moos, Germany
2003 DMG DMC 104 V LINEAR
- Manufacturer: DMG Mori
- Model: DMC 104 V LINEAR
vertical M/C X/Y/Y 1040/600/500 mm, Table1250 x 600 mm, 13/19 kw - max. 12000 Upm, Siemens 810 D Powerline
Moos, Germany
DURMA PBH-60
- Manufacturer: Durma - Durmazlar
Control: konventionell | Angle steel/side length: siehe TD mm | Double t-iron on the x-axis: siehe TD mm | U-iron on the x-axis: siehe TD mm | Total power requirement: kW | Weight of the machine ca.: 0,9 t | Dim...
Göppingen, Germany